Osseointegration of porous titanium and tantalum implants in ovariectomized rabbits: A biomechanical study

BACKGROUNDToday, biological fixation of uncemented press-fit acetabular components plays an important role in total hip arthroplasty. Long-term stable fixation of these implants depends on the osseointegration of the acetabular cup bone tissue into the acetabular cup implant, and their ability to withstand functional loads.AIMTo compare the strength of bone-implant osseointegration of four types of porous metal implants in normal and osteoporotic bone in rabbits.METHODSThe study was performed in 50 female California rabbits divided into non-ovariectomized (non-OVX) and ovariectomized groups (OVX) at 6 mo of age. Rabbits were sacrificed 8 wk after the implantation of four biomaterials [TTM, CONCELOC, Zimmer Biomet''s Trabecular Metal (TANTALUM), and ATLANT] in a 5-mm diameter defect created in the left femur. A biomechanical evaluation of the femur was carried out by testing implant breakout force. The force was gradually increased until complete detachment of the implant from the bone occurred.RESULTSThe breakout force needed for implant detachment was significantly higher in the non-OVX group, compared with the OVX group for all implants (TANTALUM, 194.7 ± 6.1 N vs 181.3 ± 2.8 N; P = 0.005; CONCELOC, 190.8 ± 3.6 N vs 180.9 ± 6.6 N; P = 0.019; TTM, 186.3 ± 1.8 N vs 172.0 N ± 11.0 N; P = 0.043; and ATLANT, 104.9 ± 7.0 N vs 78.9 N ± 4.5 N; P = 0.001). In the OVX group, The breakout forces in TANTALUM, TTM, and CONCELOC did not differ significantly (P = 0.066). The breakout force for ATLANT in the OVX group was lower by a factor of 2.3 compared with TANTALUM and CONCELOC, and by 2.2 compared with TTM (P = 0.001). In the non-OVX group, the breakout force for ATLANT was significantly different from all other implants, with a reduction in fixation strength by a factor of 1.9 (P = 0.001).CONCLUSIONTANTALUM, TTM, and CONCELOC had equal bone-implant osseointegration in healthy and in osteoporotic bone. ATLANT had significantly decreased osseointegration (P = 0.001) in healthy and in osteoporotic bone.     

A Phantom-Based Method to Assess X-Ray Table Mattress Interface Pressures

BackgroundPressure redistribution performance of x-ray table mattresses can influence the development of pressure ulcers in at-risk populations. Interface pressure analysis, with human participants, is a common method to assess mattresses. This approach has limitations that relate to the lack of standardisation between and within humans.AimThis study aimed to develop and validate an anthropomorphic phantom-based method to assess x-ray table mattress interface pressures as an index of mattress performance.MethodsA three dimensional phantom simulating an adult’s head, pelvis, and heels was printed from x-ray computed tomography image data and attached to a metal frame 175 cm in length. Dry sand was added to the phantom head, pelvis, and heels to represent a range of human weights. Pressure distribution was assessed using XSensor. Phantom validation was achieved by comparing phantom mattress interface pressure characteristics, for five human equivalent weights, against 27 sets of human mattress interface pressure data.ResultsUsing the correlation coefficient R, phantom and human pressure data showed good correlation for the five phantom weights (R values: head = 0.993, pelvis = 0.997, and heels = 0.996).ConclusionA novel method to test x-ray mattresses for interface pressure was developed and validated. The method could have utility in the testing of x-ray mattresses that are in routine use and for new mattress development. Phantom interface pressure data could be provided by manufacturers to help inform procurement decisions when matching mattress characteristics to medical imaging demands and the underlying patient populations.     

从母胎界面着眼探究子痫前期的发病机制

        子痫前期（pre-eclampsia，PE）是指妊娠20周以后出现的新发高血压伴多系统受累和损害的综合征。在世界范围内，每年子痫前期可造成大于50万新生儿和胎儿以及大于7万孕产妇死亡，全球发病率约2%～8%［1］。而重度子痫前期可继发出现溶血、肝酶升高、血小板减少等，即HELLP综合征，导致全身多个系统器官损害。子痫前期是多种因素共同作用所致，因此应该从多角度、多机制探究子痫前期的分子病理学基础，方有可能实现PE的早期预测和预防。 浏览更多请关注本刊微信公众号及当期杂志。     

Analysis of the diagnosis of Japanese patients with primary ciliary dyskinesia using a conditional reprogramming culture

BackgroundPrimary ciliary dyskinesia (PCD) is diagnosed through multiple methods, including transmission electron microscopy (TEM), a high-speed video microscopy analysis (HSVA), immunofluorescence (IF), and genetic testing. A primary cell culture has been recommended to avoid the misdiagnosis of secondary ciliary dyskinesia derived from infection or inflammation and improve diagnostic accuracy. However, primary cells fail to differentiate into ciliated cells through repeated passages. The conditional reprogramming culture (CRC) method, a combination of a Rho-kinase inhibitor and fibroblast feeder cells, has been applied to cystic fibrosis. The goal of this study was to evaluate the value of CRC in diagnosing PCD in Japanese patients.MethodsEleven patients clinically suspected of having PCD were included. Airway epithelial cells were obtained from an endobronchial forceps biopsy and cultured at the air-liquid interface (ALI) combined with CRC. Ciliary movement, ultrastructure, and mutated ciliary protein evaluation were performed using HSVA, TEM, and IF, respectively. Genetic testing was performed on some patients.ResultsCRC yielded dense and well-differentiated ciliated cells with a high success rate (～90%). In patients with PCD, the ciliary ultrastructure phenotype (outer dynein arm defects or normal ultrastructure) and IF findings (absence of the mutated ciliary protein) were confirmed after CRC. In DNAH11-mutant cases with normal ultrastructure by TEM, the HSVA revealed stiff and hyperfrequent ciliary beating with low bending capacity in CRC-expanded cells, thereby supporting the diagnosis.ConclusionsCRC could be a potential tool for improving diagnostic accuracy and contributing to future clinical and basic research in PCD.     

Using EMG to deliver lumbar dynamic electrical stimulation to facilitate cortico-spinal excitability

BackgroundPotentiation of synaptic activity in spinal networks is reflected in the magnitude of modulation of motor responses evoked by spinal and cortical input. After spinal cord injury, motor evoked responses can be facilitated by pairing cortical and peripheral nerve stimuli.ObjectiveTo facilitate synaptic potentiation of cortico-spinal input with epidural electrical stimulation, we designed a novel neuromodulation method called dynamic stimulation (DS), using patterns derived from hind limb EMG signal during stepping.MethodsDS was applied dorsally to the lumbar enlargement through a high-density epidural array composed of independent platinum-based micro-electrodes.ResultsIn fully anesthetized intact adult rats, at the interface array/spinal cord, the temporal and spatial features of DS neuromodulation affected the entire lumbosacral network, particularly the most rostral and caudal segments covered by the array. DS induced a transient (at least 1 min) increase in spinal cord excitability and, compared to tonic stimulation, generated a more robust potentiation of the motor output evoked by single pulses applied to the spinal cord. When sub-threshold pulses were selectively applied to a cortical motor area, EMG responses from the contralateral leg were facilitated by the delivery of DS to the lumbosacral cord. Finally, based on motor-evoked responses, DS was linked to a greater amplitude of motor output shortly after a calibrated spinal cord contusion.ConclusionCompared to traditional tonic waveforms, DS amplifies both spinal and cortico-spinal input aimed at spinal networks, thus significantly increasing the potential and accelerating the rate of functional recovery after a severe spinal lesion.     

Endovascular deep brain stimulation: Investigating the relationship between vascular structures and deep brain stimulation targets

BackgroundEndovascular delivery of current using ‘stentrodes’ – electrode bearing stents – constitutes a potential alternative to conventional deep brain stimulation (DBS). The precise neuroanatomical relationships between DBS targets and the vascular system, however, are poorly characterized to date.ObjectiveTo establish the relationships between cerebrovascular system and DBS targets and investigate the feasibility of endovascular stimulation as an alternative to DBS.MethodsNeuroanatomical targets as employed during deep brain stimulation (anterior limb of the internal capsule, dentatorubrothalamic tract, fornix, globus pallidus pars interna, medial forebrain bundle, nucleus accumbens, pedunculopontine nucleus, subcallosal cingulate cortex, subthalamic nucleus, and ventral intermediate nucleus) were superimposed onto probabilistic vascular atlases obtained from 42 healthy individuals. Euclidian distances between targets and associated vessels were measured. To determine the electrical currents necessary to encapsulate the predefined neurosurgical targets and identify potentially side-effect inducing substrates, a preliminary volume of tissue activated (VTA) analysis was performed.ResultsSix out of ten DBS targets were deemed suitable for endovascular stimulation: medial forebrain bundle (vascular site: P1 segment of posterior cerebral artery), nucleus accumbens (vascular site: A1 segment of anterior cerebral artery), dentatorubrothalamic tract (vascular site: s2 segment of superior cerebellar artery), fornix (vascular site: internal cerebral vein), pedunculopontine nucleus (vascular site: lateral mesencephalic vein), and subcallosal cingulate cortex (vascular site: A2 segment of anterior cerebral artery). While VTAs effectively encapsulated mfb and NA at current thresholds of 3.5 V and 4.5 V respectively, incremental amplitude increases were required to effectively cover fornix, PPN and SCC target (mean voltage: 8.2 ± 4.8 V, range: 3.0–17.0 V). The side-effect profile associated with endovascular stimulation seems to be comparable to conventional lead implantation. Tailoring of targets towards vascular sites, however, may allow to reduce adverse effects, while maintaining the efficacy of neural entrainment within the target tissue.ConclusionsWhile several challenges remain at present, endovascular stimulation of select DBS targets seems feasible offering novel and exciting opportunities in the neuromodulation armamentarium.     

Usability standards meet scenario-based design: Challenges and opportunities

The focus of this paper is on the challenges and opportunities presented by developing scenarios of use for interactive medical devices. Scenarios are integral to the international standard for usability engineering of medical devices (IEC 62366:2007), and are also applied to the development of health software (draft standard IEC 82304-1). The 62366 standard lays out a process for mitigating risk during normal use (i.e. use as per the instructions, or accepted medical practice). However, this begs the question of whether “real use” (that which occurs in practice) matches “normal use”. In this paper, we present an overview of the product lifecycle and how it impacts on the type of scenario that can be practically applied. We report on the development and testing of a set of scenarios intended to inform the design of infusion pumps based on “real use”. The scenarios were validated by researchers and practitioners experienced in clinical practice, and their utility was assessed by developers and practitioners representing different stages of the product lifecycle.These evaluations highlighted previously unreported challenges and opportunities for the use of scenarios in this context. Challenges include: integrating scenario-based design with usability engineering practice; covering the breadth of uses of infusion devices; and managing contradictory evidence. Opportunities included scenario use beyond design to guide marketing, to inform purchasing and as resources for training staff. This study exemplifies one empirically grounded approach to communicating and negotiating the realities of practice.