Comparison of Foaming Properties Between the Shirasu Porous Glass Membrane Device and Tessari’s Three-way Stopcock Technique for Polidocanol and Ethanolamine Oleate Foam Production: A Benchtop Study

PurposeTo compare the characteristics of polidocanol (POL) and ethanolamine oleate (EO) sclerosing foams produced by a Shirasu porous glass membrane (SPGM) device with those made using a 3-way stopcock (3WSC).Materials and MethodsFoam half-life times were measured in an ex-vivo benchtop study. Computed tomography (CT) images of each foam were obtained over the time course, and a CT texture analysis was conducted. The bubble size in each foam was measured by an optical microscope.ResultsMedian foam half-life times were longer in the SPGM group than in the 3WSC group (POL: 198 vs 166 s, P = .02; EO: 640 vs 391 s, P < .01). In the CT texture analysis, median standard deviation (SD) and entropy (randomness) were lower, and median energy (uniformity) and gray-level cooccurrence matrix (GLCM) homogeneity were higher in the SPGM group than in the 3WSC group (POL SD: at 30 s and 50–300 s; POL entropy: at 0–60 s; EO SD: at 0–600 s; EO entropy: at 0–460 s; POL energy: at 0–40 s; POL GLCM homogeneity: at 0–250 s; EO energy: at 0–360 s; EO GLCM homogeneity: at 0–480 s; all P < .05). Median bubble diameters in the SPGM group and in the 3WSC group were 69 and 83 μm (P < .01), respectively, in the POL foam; and 36 and 36 μm (P = .45), respectively, in the EO foam.ConclusionsPOL and EO foams had greater uniformity and longer foam half-life time when prepared with an SPGM device than with a 3WSC.     

Cancer Stem Cells and Circulatory Tumor Cells Promote Breast Cancer Metastasis

Breast cancer (BC) is a highly metastatic, pathological cancer that significantly affects women worldwide. The mortality rate of BC is related to its heterogeneity, aggressive phenotype, and metastasis. Recent studies have highlighted that the tumor microenvironment (TME) is critical for the interplay between metastasis mediators in BC. BC stem cells, tumor-derived exosomes, circulatory tumor cells (CTCs), and signaling pathways dynamically remodel the TME and promote metastasis. This review examines the cellular and molecular mechanisms governing the epithelial to mesenchymal transition (EMT) that facilitate metastasis. This review also discusses the role of cancer stem cells (CSCs), tumor-derived exosomes, and CTs in promoting BC metastasis. Furthermore, the review emphasizes major signaling pathways that mediate metastasis in BC. Finally, the interplay among CSCs, exosomes, and CTCs in mediating metastasis have been highlighted. Therefore, understanding the molecular cues that mediate the association of CSCs, exosomes, and CTCs in TME helps to optimize systemic therapy to target metastatic BC.     

Photodynamic therapy during second surgery for recurrent gliomas improves survival

BackgroundGlioma accounts for most central nervous system tumors, and the degree of invasion and malignancy are higher in the recurrent glioma. Photodynamic therapy (PDT) is an effective strategy in glioma. This study aimed to explore the risk factors for re-recurrence after a second glioma surgery and the effects of PDT on re-recurrence.MethodsThis was a retrospective study in the Second Affiliated Hospital of Harbin Medical University in China, and 43 patients that received the secondary surgery for recurrent glioma were included. The Kaplan-Meier test and Cox proportional hazard method were used to analyze.ResultsThe total re-recurrence rate after the second surgery for recurrent glioma was 48.84%. When the age increased by 1, the risk of re-recurrence increased 1.065 times (95% CI 1.000–1.134, P = 0.049). High matrix metalloproteinase (MMP) 2 expression was associated with a significantly higher risk of re-recurrence than low MMP2 expression (HR = 25.550, 95% CI 3.190–204.650, P = 0.002). Pathological grades IV and III were associated with a significantly higher risk of re-recurrence than pathological grade II (HR = 17.121, 95% CI 2.345–124.986, P = 0.005; HR = 2863.470, 95% CI 100.697–81,427.197, P < 0.001). PDT decreased the risk of re-recurrence (HR = 25.550, 95% CI 3.190–204.650, P = 0.002) and increased survival time (HR = 3.611, 95% CI 1.012–12.888, P = 0.048).ConclusionThe age, MMP2 expression, and pathological grade are independent risk factors for re-recurrence after a second surgery for recurrent glioma. PDT during the second surgery decreased the risk of re-recurrence and increased survival time.     

Prolyl and lysyl hydroxylases in collagen synthesis

Collagens are the most abundant proteins in the extracellular matrix. They provide a framework to build organs and tissues and give structural support to make them resistant to mechanical load and forces. Several intra‐ and extracellular modifications are needed to make functional collagen molecules, intracellular post‐translational modifications of proline and lysine residues having key roles in this. In this article, we provide a review on the enzymes responsible for the proline and lysine modifications, that is collagen prolyl 4‐hydroxylases, 3‐hydroxylases and lysyl hydroxylases, and discuss their biological functions and involvement in diseases.     

Selective Laser Melting of Al-Based Matrix Composites with Al2O3 Reinforcement: Features and Advantages

Aluminum matrix composites (AMC) are of great interest and importance as high-performance materials with enhanced mechanical properties. Al₂O₃ is a commonly used reinforcement in AMCs fabricated by means of various technological methods, including casting and sintering. Selective laser melting (SLM) is a suitable modern method of the fabrication of net-shape fully dense parts from AMC with alumina. The main results, achievements, and difficulties of SLM applied to AMCs with alumina are discussed in this review and compared with conventional methods. It was shown that the initial powder preparation, namely the particle size distribution, sphericity, and thorough mixing, affected the final microstructure and properties of SLMed materials drastically. The distribution of reinforcing particles tends to consolidate the near-melting pool-edges process because of pushing by the liquid–solid interface during the solidification process that is a common problem of various fabrication methods. The achievement of an homogeneous distribution was shown to be possible through both the thorough mixing of the initial powders and the precise optimization of SLM parameters. The strength of the AMCs fabricated by the SLM method was relatively low compared with materials produced by conventional methods, while for superior relative densities of more than 99%, hardness and tribological properties were obtained, making SLM a promising method for the Al-based matrix composites with Al₂O₃.     

Thinned-out skin paddle versus collagen matrix as an optimized peri-implant soft tissue following fibula osteoseptocutaneous free flap: 3-year retrospective study

The objective of this study was to compare the implant longevity following two methods of peri-implant soft tissue optimization following free fibula flap (FFF): thinning of skin paddle (SP) and collagen matrix (CM). All patients who underwent rehabilitation with dental implants after mandibular reconstruction with FFF between June 2009 to May 2014 were retrospectively reviewed. Two methods of peri-implant soft tissue optimization were applied: (1) SP group, (2) CM group. Outcome measurements were: modified plaque index (mPI), modified sulcus bleeding index (mSBI), probing depth (PD), marginal bone loss (MBL), implant success rate and complication rates. A total of 24 patients with 69 implants were included in the study, with 8.7% (n = 6) of implants lost in 3 years. No statistically significant difference was found regarding the outcome measurements in both groups. Failed implants presented with statistically significant higher mPI, mSBI, PD and MBL scores during prosthesis delivery and subsequent follow-ups (P<0.03). In the SP group, one patient experienced SP necrosis which later underwent soft tissue optimization using CM. CM is an alternative peri-implant soft tissue, while thinning of SP is feasible if thickness is well controlled.     

Germline gain-of-function MMP11 variant results in an aggressive form of colorectal cancer

Matrix metalloproteinase-11 (MMP11) is an enzyme with proteolytic activity against matrix and nonmatrix proteins. Although most MMPs are secreted as inactive proenzymes and are later activated extracellularly, MMP11 is activated intracellularly by furin within the constitutive secretory pathway. It is a key factor in physiological tissue remodeling and its alteration may play an important role in the progression of epithelial malignancies and other diseases. TCGA colon and colorectal adenocarcinoma data showed that upregulation of MMP11 expression correlates with tumorigenesis and malignancy. Here, we provide evidence that a germline variant in the MMP11 gene (NM_005940: c.232C>T; p.(Pro78Ser)), identified by whole exome sequencing, can increase the tumorigenic properties of colorectal cancer (CRC) cells. P78S is located in the prodomain region, which is responsible for blocking MMP11's protease activity. This variant was detected in the proband and all the cancer-affected family members analyzed, while it was not detected in healthy relatives. In silico analyses predict that P78S could have an impact on the activation of the enzyme. Furthermore, our in vitro analyses show that the expression of P78S in HCT116 cells increases tumor cell invasion and proliferation. In summary, our results show that this variant could modify the structure of the MMP11 prodomain, producing a premature or uncontrolled activation of the enzyme that may contribute to an early CRC onset in these patients. The study of this gene in other CRC cases will provide further information about its role in CRC development, which might improve patient treatment in the future.