Regeneration in grafts of normal and denervated rat muscles

Summary The soleus or extensor digitorum longus muscles of young rats were freely grafted into the bed of the corresponding contralateral muscle. The grafts were of normal muscle or muscles which had been denervated for 14 days. Grafts of normal muscle were characterized by little or no contractile activity for the first 2–4 days after transplantation. In contrast, denervated grafts contracted weakly, but consistently, throughout this early period. The patterns of contraction were complex. In early transplants, the contractions were due entirely to surviving muscle fibers in the graft, and the contractile characteristics were those of denervated muscle fibers. After the first week, contractions of newly regenerating muscle fibers within the grafts were superimposed upon and later took over those from the fibers that survived the original transplantation. The contraction time approached those of the normal soleus or extensor muscles during the second month after grafting, and the grafts contracted like fast or slow muscles.     

DNA polymerases α, δ, and ɛ of Novikoff hepatoma cells differ from those of normal rat liver in physicochemical and catalytic properties

To investigate whether DNA replication in malignant cells deviates from that of normal cells we compared DNA polymerases , , and from normal rat liver to the enzymes from fast-growing (malignant) Novikoff hepatoma cells. DNA polymerases were purified 300-fold by three chromatographic steps. Characterization included measurement of physicochemical constants (including sedimentation coefficients, diffusion coefficients, calculation of relative molecular masses), quantitation of catalytic activities using specific DNA primer templates (K _m values) and inhibitors (K _i values), and identification of polypeptides which are strongly associated with DNA polymerases. Comparison of physicochemical and catalytic properties of DNA polymerases from both sources revealed similarities but also some important differences. DNA primase associated with DNA polymerase , and 3–5 exonuclease accompanying DNA polymerases and had similar activities. In contrast, the DNA-binding domain of DNA polymerases and from hepatoma cells was altered since K _m values, determined with the specific primer templates gapped calf thymus DNA and poly(dA·dT), were higher. Furthermore, sedimentation and diffusion coefficients, Stokes' radii, and frictional coefficient ratios of DNA polymerases and from malignant cells significantly deviated. In addition, when the dNTP-binding sites were probed with specific inhibitors (aphidicolin, butylphenyl-dGTP, carbonyldiphosphonate, and dideoxy-TTP), significantly lower K _i values were obtained for the polymerases from Novikoff cells indicating lower affinity of the dNTP binding site to deoxyribonucleoside 5-triphosphates. Altered catalytic and molecular properties are possibly a consequence of malignant transformation. It is to be expected that similar changes occur in DNA polymerases of other tumors. In particular, diminished affinity to primer templates and weakened nucleotide binding leads to lowered specificity of nucleotide selection in the base-pairing process and is therefore likely to cause an enhanced mutation rate during malignant progression.Abbreviations PCNA 3 Proliferating-cell nuclear antigen This paper is dedicated to Prof. Dr. R. Neidlein on the occasion of his 65th birthday.     

Micelles Based on Polyvinyl Alcohol Substituted with Oleic Acid for Targeting of Lipophilic Drugs

Polymeric micelles based on polyvinyl alcohol substituted with oleic acid were used as vehicles for progesterone and folic acid. The ability of this amphiphilic polymer to entrap lipophilic drugs and to generate stable micelles in aqueous neutral medium makes it a good candidate for drug delivery. The release of the loaded drugs in acidic environments represents another important property of these systems. Size of micelles, their stability, and their drug-loading capacity were evaluated, as well as the in vitro controlled-release profiles at pH 7.4 and 5.5.     

Subcutaneous Tissue Mechanical Behavior is Linear and Viscoelastic Under Uniaxial Tension

Subcutaneous tissue is part of a bodywide network of “loose” connective tissue including interstitial connective tissues separating muscles and surrounding all nerves and blood vessels. Despite its ubiquitous presence in the body and its potential importance in a variety of therapies utilizing mechanical stretch, as well as normal movement and exercise, very little is known about loose connective tissue's biomechanical behavior. This study aimed to determine elastic and viscoelastic mechanical properties of ex-vivo rat subcutaneous tissue in uniaxial tension with incremental stress relaxation experiments. The elastic response of the tissue was linear, with instantaneous and equilibrium tensile moduli of 4.77 kPa and 2.75 kPa, respectively. Using a 5 parameter Maxwell solid model, material parameters μ₁ = 0.95 ± 0.24 Ns/m and μ₂ = 8.49 ± 2.42 Ns/m defined coefficients of viscosity related to time constants τ_1M = 3.83 ± 0.15 sec and τ_2M = 30.15 ± 3.16 sec, respectively. Using a continuous relaxation function, parameters C = 0.25 ± 0.12, τ_1C = 1.86 ± 0.34 sec, and τ_2C = 110.40 ± 25.59 sec defined the magnitude and frequency limits of the relaxation spectrum. This study provides baseline information for the stress-strain behaviors of subcutaneous connective tissue. Our results underscore the differences in mechanical behaviors between loose and high-load bearing connective tissues and suggest that loose connective tissues may function to transmit mechanical signals to and from the abundant fibroblasts, immune, vascular, and neural cells present within these tissues.     

About consistency of Solid's solubility data in supercritical CO2 and some thermodynamic properties estimation

In chemical industry, usual solvents are being replaced by supercritical fluids. Last few years, extraction by these environmentally benign solvents has had much attention and now is considered as the newest separation technology. However, developing new applications and improving existing ones is based on a set of thermodynamic and physical properties of pure solutes related to phase equilibrium for which experimental values cannot be found and consequently, there is an increase need for accurate estimates of these properties. This paper is interested firstly to a thermodynamic property which is the Krichevskii parameter and secondly to a thermophysical one which is the sublimation pressure. First parameter is considered as a governor of thermodynamic properties in binary dilute mixtures near the solvent's critical point and can be calculated from some rigorous relationships and in this paper a review and a new way for its estimation are presented based on consistency of solid's solubility data in supercritical fluids and dilute solution theory. Second parameter is considered as the predominant influencer on solubility in supercritical fluids and unavailability of its experimental values presents an obstacle to thermodynamic modeling of solubility data. For this reason and as a second step, in this paper we present a new manner for its estimation. Obtained results are relevant, very promising for each considered property and the methodology can be applied for other solutes with more complex structures as Pharmaceuticals (antibiotics, drugs, anti-inflammatories …), polycyclic aromatic hydrocarbons (PAHC) and dyestuffs.     

Long-term alcohol consumption in the rat affects femur cross-sectional geometry and bone tissue material properties

BACKGROUND: Alcohol consumption previously has been demonstrated to reduce the density and strength of cortical bone of young, actively growing rats. Osteoblast activity and trabecular bone volume were also significantly lower. A germane question arising from these studies is whether the detrimental effects would persist into adulthood. To address this issue, a long-term study was undertaken with animals that consumed alcohol throughout their life and into old age. METHODS: One-month-old female Sprague-Dawley rats were divided into three diet groups: alcohol-fed, pair-fed, and chow-fed. The alcohol-fed animals received a modified Lieber-DeCarli diet that contained 35% ethanol-derived calories. The pair-fed group served as a caloric-equivalent control, and the chow-fed animals served as a completely untreated control. Animals were euthanized after five time periods on the diets that represented three stages of the life span: young (3 months), adult (6, 9, 12 months), and aged (18 months). The left femur was isolated and mechanically tested in 3-point bending for mechanical properties. RESULTS: In the young animals, alcohol consumption produced dramatic reductions in both extrinsic (whole bone) and intrinsic (tissue material) properties, which is consistent with results from previous studies on growing rats. For the adult animals, however, the alcohol groups were only slightly lower and the differences were not statistically significant. The aged animals showed diminished properties due to alcohol, but only for the intrinsic material properties. The extrinsic properties remained similar to controls as a result of greater radial expansion in the femur diaphysis. Despite the cross-sectional areas being the same, this expansion gave rise to higher cross-sectional moment of inertia values in the alcohol animals. The thickness of the cortical wall was lowest in the alcohol group at all time points. CONCLUSIONS: Long-term alcohol consumption produced two major effects in the oldest animals studied: the quality of the cortical bone tissue was diminished, as evidenced by reduced elastic modulus and ultimate strength values, and the bone seemed to compensate for this by expanding the cross-section to produce larger cross-sectional moment of inertia values. The reduced bone tissue quality is consistent with the lower ash percent values in the alcohol animals, but other factors such as the quality of the collagen and mineral crystal may also be important contributors.     

Effect of Decorin and Dermatan Sulfate on the Mechanical Properties of a Neocartilage

Decorin is known to influence the size of collagen fibrils in ligaments and tendons and it has been hypothesized to provide a structural link between collagen fibrils in connective tissues, including cartilage. Coincidently, mechanical properties of skin, ligament, and tendons are altered in decorin knockout mice, suggesting it may influence the structural properties of tissue or tissue matrix organization. To further examine the role of decorin in the extracellular matrix development and subsequent material properties of cartilage, tissue (neocartilage) was grown in a 3D culture model using a pure population of genetically modified chondrocytes stably overexpressing decorin (DCN) or decorin lacking dermatan sulfate (MDCN). An empty vector (CON) served as a virus control. Following generation of the cartilage-like tissues, mechanical properties in tension and compression, collagen fibril diameter, matrix organization, and biochemistry of the tissue were determined. There were no differences between CON and DCN tissues in any parameter measured. In contrast, tissue generated in MDCN cultures was thinner, had higher collagen density, and higher elastic moduli as compared to both CON and DCN tissues. Considering there was no difference in stiffness between CON and DCN tissues, the notion that decorin contributes to the mechanical properties via load transfer was refuted in this model. However, contrasts in the mechanical properties of the MDCN tissue suggest that the dermatan sulfate chains on decorin influences the organization/maturation and resultant mechanical properties of the matrix by as an yet-unidentified regulatory mechanism.     

选择性激光熔融技术成形牙科钴铬合金性能的初步研究

目的:通过测试选择性激光熔融(selective laser melting,SLM)技术制作的牙科钴铬(Co-Cr)合金的部分机械性能、表面显微结构、瓷熔附后的界面情况,以期为该技术的应用提供基础资料。方法:使用SLM技术制作牙科钴铬合金样品,用扫描电镜观察样品的表面形貌和显微结构、测试样品的密度和硬度;将样品经过除气-预氧化处理,用扫描电镜观察样品表面氧化膜的形貌和显微结构;将经过除气-预氧化处理的样品进行瓷熔附,用扫描电镜观察样品金-瓷界面的显微结构。结果:SLM制作的钴铬合金的硬度明显高于铸造钴铬合金;经过除气-预氧化处理后的氧化膜细密均匀;两种方法制作的合金在瓷熔附处理后的金-瓷界面均没有发现明显裂纹。结论:SLM技术比传统铸造技术具有一定的优越性,技术细节有待深入研究。     

甲氧沙林分散片的研制及其体外性质考察

目的：研制甲氧沙林分散片。方法：运用微晶纤维素、羧甲基淀粉钠、交联PVP等辅料制备分散片，并进行崩解时限、分散均匀性及溶出度考察，并与市售普通片进行比较。结果：甲氧沙林分散片的崩解时限、分散均匀性均符合中国药典2005年版规定。分散片的体外溶出速率较普通片快，Td，T50分别为3．2min，2．9min，而普通片分别为17．5min，15．7min。结论：筛选的处方合理，体外溶出度优于普通片。