夫西地酸乳膏联合阿达帕林凝胶治疗寻常痤疮的疗效

 目的 探讨夫西地酸乳膏联合阿达帕林凝胶治疗寻常痤疮的疗效。方法 选择武警黑龙江总队医院诊治的寻常痤疮患者110例,随机分为对照组和观察组,每组各55例。对照组单独应用阿达帕林凝胶治疗,观察组联合应用夫西地酸乳膏与阿达帕林凝胶,两组均持续治疗4周。比较两组治疗后皮损数量、不良反应、复发率等。结果 治疗4周后,与对照组相比,观察组炎性皮损、非炎性皮损个数明显减少,差异有统计学意义(P＜0.05),两组治疗后不良反应差异无统计学意义。治疗后6个月,观察组的复发率3.64%(2/55)低于对照组14.55%(8/55),差异有统计学意义(P＜0.05)。结论 夫西地酸乳膏联合阿达帕林凝胶治疗寻常痤疮,可明显改善皮损情况,安全性较高,复发率低。     

重组人表皮生长因子凝胶联合CO2点阵激光治疗增生性瘢痕的效果观察

目的观察重组人表皮生长因子凝胶联合CO₂点阵激光治疗烧伤及创伤后增生性瘢痕的临床效果。 方法选择2020年12月至2021年10月安徽医科大学第一附属医院烧伤与创面修复外科收治的20例增生性瘢痕患者，按照随机数字表法将患者分为联合治疗组及单纯激光治疗组，每组10例。术前均对2组患者术区进行拍照存像、消毒、擦干，局部均匀涂抹5%复方利多卡因乳膏后以无菌薄膜封闭保护60 min，擦去乳膏后再次消毒术区。术中使用CO₂点阵激光治疗仪对患者瘢痕部位进行扫描，根据患者增生性瘢痕厚度选定合适的机器参数，维持机器频率300 Hz及密度5%，在20～30 J调整能量参数的大小，时间间隔1 s，保证点阵矩形完全覆盖增生瘢痕，允许2次激光形成的热损伤矩阵之间存在25%面积的重叠。术后即刻冷敷创面60 min，冷敷结束至术后1周，单纯激光治疗组不外用任何药物，联合治疗组术区加用重组人表皮生长因子凝胶外用，3次/d。术后3 d治疗部位不碰水，若出现感染情况，可以加用抗生素软膏，点状损伤创面外痂皮未掉落完全时禁止擦洗创面，禁止直接剥除痂皮，禁止术区涂抹化妆品等，避免接受阳光直射。于第1次激光治疗后2个月进行第2次激光治疗，以2次CO₂点阵激光治疗为1个疗程，1个疗程治疗后间隔2个月待术区稳定后行疗效判断，计算2组患者治疗的总有效率；根据温哥华瘢痕量表(VSS)与患者与观察者瘢痕评估量表(POSAS)对患者治疗前、第1次激光治疗后2个月、第2次激光治疗后2个月瘢痕的各项指标进行评分。数据比较采用重复测量方差分析和χ²检验。 结果(1)治疗1个疗程后2个月，单纯激光治疗组与联合治疗组患者治疗的总有效率分别为80%(8/10)、90%(9/10)，2组间比较差异无统计学意义(χ²＝2.40，P＝0.49)。(2)对2组VSS评分的各项指标进行比较，其中疼痛、瘙痒、柔软度及厚度评分的组内及组间各时相点比较，差异均无统计学意义(P>0.05)。治疗前、第1次激光治疗后2个月及第2次激光治疗后2个月，单纯激光治疗组VSS评分中色泽评分分别为(1.9±0.7)、(1.9±0.1)、(1.8±1.0)分，联合治疗组分别为(2.9±0.7)、(2.8±0.6)、(1.9±0.7)分，2组在不同时相点组内比较，差异有统计学意义(F＝ 26.143，P<0.05)；2组组间不同时相点比较，差异有统计学意义(F＝6.753，P＝0.018)。治疗前、第1次激光治疗后2个月及第2次激光治疗后2个月，单纯激光治疗组VSS评分中血管分布评分分别为(1.8±1.0)、(1.7±0.7)、(1.5±1.0)分，联合治疗组分别为(2.6±0.5)、(2.5±0.5)、(1.7±0.8)分，2组在不同时相点组内比较，差异有统计学意义(F＝17.603，P<0.05)，2组组间不同时相点比较，差异无统计学意义(F＝ 2.538，P＝0.129)。(3)对2组POSAS评分的各项指标进行比较，其中厚度、粗糙度、柔软度和表面积评分的组内及组间各时相点比较，差异均无统计学意义(P>0.05)。治疗前、第1次激光治疗后2个月及第2次激光治疗后2个月，单纯激光治疗组POSAS评分中色泽评分分别为(4.9±2.6)、(4.1±0.8)、(3.5±2.0)分，联合治疗组分别为(7.6±1.1)、(6.8±1.4)、(5.4±1.8)分，2组在不同时相点组内比较，差异有统计学意义(F＝ 26.509，P<0.05)，2组组间不同时相点比较，差异有统计学意义(F＝ 8.973，P＝0.008)。治疗前、第1次激光治疗后2个月及第2次激光治疗后2个月，单纯激光治疗组POSAS评分中血管分布评分分别为(4.4±2.1)、(3.9±0.9)、(3.5±1.6)分，联合治疗组分别为(6.3±1.1)、(5.7±2.0)、(4.5±1.6)分，2组在不同时相点组内比较，差异有统计学意义(F＝ 20.118，P<0.05)，2组组间不同时相点比较，差异有统计学意义(F＝ 5.744，P＝0.028)。 结论重组人表皮生长因子凝胶联合CO₂点阵激光及单独使用CO₂点阵激光治疗增生性瘢痕均效果明确，但联合使用重组人表皮生长因子凝胶能有效促进创面愈合、改善瘢痕组织血管分布和减少局部色素沉着。     

Accurate detection of reemergent anti-donor ABO antibody is crucial for safe transfusion in ABO major incompatible HSCT patient after achieved the stages of full switch to donor type

Dynamic monitoring ABO chimera including erythroid ABO antigen and anti-A/B is crucial to not only assess the status of erythroid engraftment but also achieve personalized safety transfusion in patients post ABO incompatible hematopoietic stem cell transplantation. Transfusion support for ABO incompatible (ABOi) HSCT patients after achieved complete alteration to donor origin still remains cautious because the instant hematopoietic status on these transplant patients possibly returned to patient origin derived from early disease relapse and graft loss or failure. We reported that reemergent anti-B in a female patients (donor/patient: B/O) at the early phase after achievement complete donor type were not effectively found from partial automatic ABO blood grouping systems, which directly resulted in differential judgement of transplantation stage for about 15 days and disturbed the optimal recommendation on transfusion support. Meanwhile, the solely alteration of ABO chimera was found and earlier than changes of other markers such as MRD diagnosis, chimerism analysis by STR-PCR and sex chromosome assays, which can be an available predictors for bad transplant outcomes such as graft failure.     

Targeted drug delivery of Methotrexate in situ gels for the treatment of Rheumatoid Arthritis

Rheumatoid arthritis (RA) is considered a debilitating disease that increases the risk of significant morbidity and premature mortality. To circumvent drug-related toxicity and ineffectiveness of anti-inflammatory drugs, there is a significant need for an advanced delivery system that increases bioavailability. The feasibility of in situ gel of methotrexate sodium (MTS) as an effective management for Rheumatoid arthritis was investigated. It was formulated with pluronic F-127 (PLF-127) as primary polymer, hydroxypropyl methylcellulose K4M (HK4M), and polycarbophil (PCL) as a copolymer and characterized by various parameters. The efficacy evaluation by Freund's complete adjuvant (FCA) model, biocompatibility assessment by histopathological studies conducted. The optimized in situ gel (M4) was thermoresponsive, released 93.26 ± 2.39% MTS at 96 hours. In addition, distribution of MTS was even in the optimized sterile and syringeable in situ gel. In vivo studies on wistar rats demonstrated a substantial reduction in paw oedema during the 28-day study period and were biocompatible with the tissues at the injection site. The study was successful in formulating, optimizing MTS in situ gel for effective management of RA.     

基于二维码的电子诊疗卡系统的设计

目的构建一个以二维码作为电子诊疗卡替代医院传统诊疗卡的系统。方法依托医院微医疗平台,对患者唯一标识和时间戳进行MD5计算生成字符串,并以此内容生成二维码作为电子诊疗卡,同时对HIS进行相应改造,实现电子诊疗卡在全院的应用。结果利用时间戳和MD5签名生成二维码保证了电子诊疗卡加密的唯一性、时效性,医院每年节约成本5万元,患者每次就诊时间减少5 min,提升了患者满意度。结论本文构建的二维码电子诊疗卡系统,解决了使用实体诊疗卡过程中经常出现的忘带卡和重复办卡等问题,提高了医院服务质量,改善了患者就医体验。     

江西省锐尖山香圆亲缘关系与群体结构的ISSR分析

目的:利用简单序列重复区间扩增多态性(ISSR)分子标记技术对江西省锐尖山香圆进行亲缘关系和遗传结构分析,为该药材资源的保护和利用提供理论依据。方法:采集江西省4个县6个采样地的22份锐尖山香圆叶片样本,利用试剂盒法提取基因组DNA。利用64条通用ISSR分子标记引物进行聚合酶链式反应(PCR)扩增,运用聚丙烯酰胺凝胶电泳(PAGE)方法检测条带。选择NTsys 2. 10e软件,采用非加权配对算术平均法(UPGMA)计算遗传相似系数并聚类分析。利用Structure 2. 1软件分析群体遗传结构。结果:有48条ISSR引物扩增后获得了产物,多态性条带百分率处于45. 45%～100%。UPGMA聚类分析表明4个县的锐尖山香圆资源不能按照行政区域划分分别聚为一类,群体遗传结构分析表明22份锐尖山香圆群体可以划分为3个类群。结论:江西省锐尖山香圆群体间存在着基因交流,会影响该药材不同地理来源种质资源的遗传结构组成。     

基于响应面法优选美洲大蠊口腔原位温敏凝胶的制备研究

目的制备美洲大蠊Periplaneta americana口腔原位温敏凝胶。方法采用自由基聚合法首次以N-异丙基丙烯酰胺(NNIPAM)和甲基丙烯酸羟丙酯(HPMA)合成聚(N-异丙基丙烯酰胺-甲基丙烯酸羟丙酯)[P(NNIPAM-HPMA)]作为温敏材料;通过冷溶法制备美洲大蠊口腔原位温敏凝胶,采用Box-Behnken设计响应面法,以溶蚀时间、胶凝时间为评价指标,在固定美洲大蠊提取物用量基础上,对羟丙基甲基纤维素(HPMC)、聚乙烯吡咯烷酮(PVP K30)、P(NNIPAM-HPMA)的用量进行优选。结果通过原位聚合法合成了P(NNIPAM-HPMA)温敏材料;并用响应面法优选了可用于口腔的美洲大蠊原位温敏凝胶的处方,优选的处方为美洲大蠊提取物10%、HPMC 3.0%、PVP K30 9.5%、P(NNIPAM-HPMA) 10.0%,其溶蚀时间为2 h,胶凝时间8～9 s。结论优选得到美洲大蠊口腔原位温敏凝胶,为美洲大蠊提取物的口腔原位局部的临床应用奠定了科学依据。     

Formulation and characterization of lornoxicam-loaded cellulosic-microsponge gel for possible applications in arthritis

Rheumatoid arthritis (RA) is an autoimmune disease associated with severe joint pain. Herein, we report lornoxicam loaded cellulosic microsponge gel formulation with sustained anti-inflammatory effects that are required to manage arthritic pain. The microsponges were formulated using quasi emulsion-solvent diffusion method employing four different surfactant systems, namely polyvinyl alcohol (PVA), Tween80, Gelucire 48/16 and Gelucire 50/13. All the lornoxicam loaded microsponge formulations were extensively characterized with a variety of analytical tools. The optimized microsponge formulation was then converted into gel formulation. The lornoxicam loaded microsponge gel formulation had adequate viscosity and sufficient pharmaceutical properties as confirmed by the texture analysis and the drug release followed Super case II transport. It is noteworthy that we described the preparation of a new cellulosic polymers based microsponge system for delivery of lornoxicam to provide quick as well as lasting (sustained) anti-inflammatory effects in rats using carrageenan induced rat paw edema model. We were able to demonstrate a 72% reduction in inflammation within 4 h using the optimize transdermal gel formulation utilizing Transcutol P as permeation enhancer and with the aid of skin micro-piercing by microneedles, hence, demonstrating the potential of this microsponge gel formulation in arthritis management.