Contemporary bone loss options: Rebuild,reinforce, and augment

Bone loss is commonly encountered during revision total knee arthroplasty (TKA). Small defects can be adequately managed with cement filling (with or without screws), modular prosthetic augments, and morselized allograft. For larger defects, cancellous impaction grafting and structural allografts have traditionally been utilized. More recently, highly porous tantalum cones and titanium sleeves have been designed to achieve axial and rotational stability in the metaphysis and subsequent biologic fixation. Sleeves are linked to one type of prosthesis, whereas cones are unlinked and can be used with any implant design. Multiple studies have demonstrated excellent survivorship and radiographic osseointegration at mid-term follow-up. This article provides a review of contemporary methods of bone loss management with a focus on highly porous metals and an emphasis on the authors’ preferred method for managing the severe bone loss in revision TKA.     

Polyethylene in knee arthroplasty: A review

Polyethylene (PE) has been used extensively in knee arthroplasty since the mid 20th century. Progress in material manufacturing and processing has led to newer polyethylenes over last few decades with different material properties. It has been established that PE wear in knee arthroplasty causes particle induced osteolysis which is the main reason for late failure and requires revision surgery. Although there are various causes of wear, the properties of PE have long been a matter of investigation as a contributory factor. The advent of newer highly cross linked PE has been shown to improve wear rates in hip arthroplasty but the benefits have not been shown to be of the same degree in knee arthroplasty. The laboratory and clinical studies so far are limited and slightly conflicting in their conclusions. The risks of using highly cross linked PE in knee arthroplasty include tibial post fracture, disruption of locking mechanism, liner fracture which can lead to increased wear and osteolysis. The current evidence suggests that highly cross linked polyethylenes should be used with caution and only considered in younger active patients. The results of a recently completed randomized trial to compare the conventional with high molecular weight PE in knee arthroplasty are awaited.     

Longer Operative Time Results in a Higher Rate of Subsequent Periprosthetic Joint Infection in Patients Undergoing Primary Joint Arthroplasty

Background

Whether prolonged operative time is an independent risk factor for subsequent surgical site infection (SSI) and periprosthetic joint infection (PJI) following total joint arthroplasty (TJA) remains a clinically significant and underexplored issue. The aim of this study is to investigate the association between operative time and the risk of subsequent SSI and PJI in patients undergoing primary TJA.

Accuracy and Precision of Acetabular Component Placement With Imageless Navigation in Obese Patients

Background

Obesity is a risk factor for acetabular component malposition when total hip arthroplasty is performed with manual techniques. The utility of imageless navigation in obese patients remains unknown. This study compared the accuracy and precision of imageless navigation for component orientation between obese and nonobese patients.

Adductor Canal Block or Local Infiltrate Analgesia for Pain Control After Total Knee Arthroplasty? A Systematic Review and Meta-Analysis of Randomized Controlled Trials

Background

Total knee arthroplasty is a treatment option for debilitating arthritis. In the postoperative period, patients experience moderate to severe pain affecting the rehabilitation, hospital stay, and patient satisfaction. This study aims at utilizing current best evidence to determine whether adductor canal block (ACB) or periarticular injection (PAI) is a better modality for managing short-term postoperative pain and opioid consumption.

Effect of Day Optimizing Throughput (Dot) Knee Software Implementation on Magnetic Resonance Imaging Workflow Efficiency

PurposeAttempts by magnetic resonance (MR) manufacturers to help imaging centres improve patient throughput has led to the development of more automated acquisition. This software is capable of customizing individual scan alignment; potentially improving imaging efficiency and standardizing protocols. However, substantial investments are required to introduce such systems, potentially deterring their widespread application. This study assessed the implementation costs and reduction in examination durations for automated knee MR imaging (MRI) software.Materials and MethodsResearch activities were performed at a community-based academic centre on a 3-Tesla (3-T) system using Siemens' Day Optimizing Throughput (Dot) knee software. Examination acquisition times were extracted from the system before and after software implementation. Fiscal year 2012/13 finances were used to determine the average hourly cost of MRI utilization. Costs associated with automated software implementation were also calculated. Finally, the number of knee scans required to achieve a positive return on investment using the software was established.Results and DiscussionThe mean (standard deviation, sample size) pre- and post-Dot software scan times were 23.20 (4.18, n = 266) and 21.94 (4.51, n = 59) minutes, respectively, for a routine knee scan and 11.88 (1.60, n = 74) and 11.24 (1.51, n = 27) minutes, respectively, for a fast knee scan. The overall weighted average resulted in a 64-second time savings per automated knee examination. This negligible time savings would be extremely difficult to make use of clinically. Dot simplified 29 unique knee protocols to two, improving the consistency of knee examinations. Current Dot software is not compatible with all patients and therefore has limitations that are a concern among MR technologists.ConclusionAdoption of automated knee systems could assist in standardizing protocols; however, the cost of implementation and difficulty in modifying patient scheduling to reflect the minimal time savings would make a financial return unlikely to occur at small- and medium-sized institutions.     

Isokinetic flexion strength recovery after ACL reconstruction: a comparison between all inside graft-link technique and full tibial tunnel technique

Introduction: Recently, a new minimally invasive single bundle technique for anatomic ACL reconstruction has been described, called the ‘All-Inside graft-link technique’. One of the advantages of this procedure is the reduced morbidity at the donor site as the graft choice is the quadrupled semitendinosus, thus sparing the gracilis tendon. The aim of this study was to evaluate isokinetic flexion strength recovery in patients who underwent a gracilis sparing technique compared to those with a full-tibial tunnel technique using a doubled gracilis and semitendinosus tendons (DGST) graft.

Methods: Patients were divided into two groups: Group A (22 patients) who underwent ACL reconstruction performed with an All-Inside graft-link technique; Group B (22 patients) who underwent ACL reconstruction with an Out-In technique and DGST graft. At a mean follow-up of 13 months, quadriceps and hamstring isokinetic peak torque deficits were recorded.

Results: In group A, the mean side to side peak torque flexion difference between the operated and non-operated limbs was ?3% and the mean torque at 30° was ?7.5% at high angular velocity (180°/sec); the mean peak flexion torque was 7.2% and the mean torque at 30° was 3.1% at low angular velocity (60°/sec).

In group B, the mean side to side peak flexion torque was ?3.5% and the mean torque at 30° was ?7.6% at high angular velocity (180°/sec); the mean peak flexion torque was ?7.2% and the mean torque at 30° was ?11% at low angular velocity (60°/sec).

A statistically significant difference was found between the two groups at lower angular velocity both for the mean peak flexion torque and the mean torque at 30° (p = 0.009), with better results in the study group.

Discussion/conclusion: Gracilis sparing technique is a minimally invasive technique for ACL reconstruction and yielded a significantly better flexion strength recovery at lower angular velocity compared to a full tibial tunnel technique with DGST for ACL reconstruction.     

Outcome of isolated posterior cruciate ligament reconstruction at mean 6.3-year follow up: a consecutive case series

Objectives: There is a paucity of reporting on surgical outcomes of isolated posterior cruciate ligament reconstruction (PCLR). We hypothesize that isolated PCL injuries failing nonoperative treatment achieve good outcomes and are able to return to sport following PCLR.

Methods: A retrospective analysis was performed to identify patients with isolated PCL injuries that underwent reconstruction between 2001 and 2014. Patients with multi-ligamentous injury or another concomitant knee pathology were excluded. Medical records were reviewed for demographic, clinical and operative data. Patients were contacted for administration of a telephone-based questionnaire which included the International Knee Documentation Committee (IKDC) Subjective Knee Evaluation form, Lysholm-Tegner scales, Marx activity scale (MAS), return to sport status, and patient satisfaction instruments.

Results: A total of 15 isolated PCL reconstructions in 14 patients with a mean age of 27.5 years (range 17–43) met the study inclusion criteria; mean follow up was 6.3 years (range 1.4–15.2). Pre-operatively, the primary complaint was knee instability in all patients; on physical examination, lack of a firm end point during posterior drawer testing was found in 93% (14/15) of the knees. In total, 12 of 15 knees underwent transtibial, single-bundle PCLR and three of 15 underwent tibial inlay, double bundle PCLR. Graft types included: quadriceps autograft (7/15), Achilles allograft (6/15), and hamstring autograft (2/15). There were no graft failures in our patient cohort. At most recent follow up the mean scores respectively on the IKDC form, Lysholm-Tegner scales and MAS were (standard deviation): 77.3 (16.5), 83.1 (17.9), 6.13 (2.6), and 7.1 (6.0). All fourteen patients were athletes prior to their injury and 79% (11/14) returned to sport and overall patient satisfaction was 9.2/10.

Conclusions: Isolated PCLR provides good outcomes at mean medium-term follow up with restoration of function, high rate of return to sport and overall patient satisfaction.     

Prospective comparative study of intraoperative “Towel clip test” and “Vertical patella test” assessing lateral retinaculum tightness in patients undergoing TKA

BackgroundProper patellar tracking is one of the most important aspect of TKA to ensure good functional outcome. A patellar tracking problem noted intraoperatively serves as a warning sign and should prompt the surgeon to reassess position of each component. Various tests are there to assess lateral retinaculum tightness viz. "No thumb test", "Towel clip test". A new test "Vertical patella test" is described to assess lateral retinaculum tightness. A study was conducted to assess the effectiveness, correlation and validity of two techniques.Materials & MethodsPatients >50 years of age and with diagnosis of Osteoarthritis knee having less than 30 varus and flexion deformity going in for primary TKA were selected with a sample size of 100 knees in a tertiary care centre. Revision cases or patients with flexion contracture more than 30, complex knee surgery; with pre existing patellar tilt were excluded from study.ResultsResults of both tests were found to correlate in 75% of case with sensitivity of 96.65% and specificity of 75.00%. Kappa came out to be 0.634 which shows good agreement of vertical patella test and towel clip test. Result was computed using excel and SPSS and was found to be significant with p value< 0.05. Lateral retinaculum release was done in 8 knees.ConclusionsVertical patella test correlates with towel clip test, is easy to perform and saves time. The limitation of our study was small sample size.