Non-weightbearing imaging and standard knee radiographs are inferior to formal alignment radiographs for calculating coronal alignment of the knee

IntroductionRealignment knee osteotomy relies on accurate preoperative assessment of coronal alignment. Weightbearing (WB) ‘long-leg’ (LL) radiographs are the accepted gold-standard investigation, though in practice standard knee radiographs (short leg; SL) and non-weightbearing (NWB) cross-sectional imaging such as computed tomography (CT) scanograms have been used. We compare the accuracy of SL and NWB radiographs to formal LL alignment radiographs.MethodsA prospectively maintained osteotomy database was reviewed to identify the study population. All patients underwent standardised weightbearing long-leg alignment radiographs. The series was screened consecutively until 30 patients who also underwent WB SL radiographs (‘WB cohort’), and 30 with NWB SL (‘NWB cohort’) radiographs, were identified. Anatomic tibiofemoral angle was calculated by independent reviewers using a validated technique from both radiographs and contrasted.Results60 patients were identified as outlined in the study protocol. There were no differences in baseline demographics. Coronal alignment calculated from SL and LL radiographs differed significantly (median difference 2.1°, p < 0.001). Alignment values from weightbearing SL radiographs demonstrated markedly greater agreement with LL values than those from NWB radiographs (intraclass correlation coefficient 0.878 vs 0.657), with the NWB cohort also exhibiting greater outlier and extreme outlier incidence.ConclusionOur data adds to the growing evidence that SL radiographs are inadequate in the interpretation of knee alignment. In addition, we demonstrate that NWB radiographs (and by extension other NWB modalities such CT scanograms) demonstrate poorer agreement to gold-standard than WB methods. Coronal alignment of the knee cannot be reliably measured from non-weightbearing imaging modalities.Implications for practiceThough potentially useful as an adjunct, non-weightbearing cross-sectional imaging and standard knee radiographs should not be used as a proxy for formal weightbearing long-leg radiographs in osteotomy planning.     

Evaluation of hindfoot and knee alignment by the hip-to-calcaneus view in patients with knee osteoarthritis and healthy individuals

BackgroundHip-to-calcaneus (HC) view is a whole-leg standing view that can visualize the hindfoot in detail. The aim of this study was to investigate the reliability and validity of tibiocalcaneal angle in HC view (H-TCA) by comparing it with that in long axial view (L-TCA). We also verified whether periarticular knee alignment parameters, measured conventionally in whole-leg standing radiography, could be measured in HC view.MethodSixty healthy volunteers and 61 patients with medial knee osteoarthritis were included. H-TCA was measured by two examiners in the healthy group, and intra-class correlation coefficients (ICCs) were evaluated. H-TCA and L-TCA were then measured in the healthy and osteoarthritis groups and correlated. Finally, we measured hip–knee–ankle angle, mechanical axis deviation ratio, mechanical lateral distal femoral angle, medial proximal tibial angle, and joint-line convergence angle in HC view and conventional whole-leg standing radiography to evaluate statistical differences and correlations.ResultsThe intra-observer and inter-observer ICCs were 0.86 and 0.76, respectively. Correlation coefficients (r) between H-TCA and L-TCA were r = 0.87 in healthy group and r = 0.81 in osteoarthritis group, indicating a strong positive correlation in both groups. There was no significant difference in periarticular knee alignment parameters between HC view and conventional whole-leg radiography.ConclusionsHindfoot evaluation in HC view showed high intra-observer and inter-observer reliabilities and strong positive correlation with TCA in long axial view. By using HC view before knee surgery, such as total knee arthroplasty, other necessary alignments can be evaluated simultaneously.     

Sonication of Antibiotic Loaded Cement Spacers: A Valuable Technique for Detection of Infection Persistence in Two-stage Revision for Infected Joint Arthroplasty

We evaluated the diagnostic utility of sonication of antibiotic loaded cement spacers comparing with periprosthetic tissue cultures for the detection of persisting infection in 14 patients undergoing staged procedures. Sonication improved microbial detection of intraoperative cultures from 14.2% to 28.5% (P = 0.481). Routine sonication of spacers is recommended.     

Association of quadriceps angle with plantar pressure distribution,navicular height and calcaneo-tibial angle

ObjectiveThe aim of study was to analyze the association between Quadriceps Angle (QA) and plantar pressure, navicular height (NH), and calcaneo-tibial angle (CTA).MethodsA total of 64 volunteers (mean age: 22.25 ± 2.54 (range:19–33)) participated in this cross sectional study. EMED-m (Novel GmbH, Germany) electronic pedobarograph was employed for dynamic plantar pressure measurement using two step protocol. The angle between the vertical axis of calcaneus and the long axis of Achilles tendon for CTA. The height of navicular tubercle from the ground was measured while the subject was standing on both feet for NH. QA was measured while the subject was standing in a relaxed posture where both feet bearing equal weight.ResultsThere were significant negative correlations between QA and maximum force (MxF) under the 4th. metatarsal head (MH4). The QA was also significantly correlated with MxF and force-time integral (FTI) under the bigtoe (BT). FTI under the 3rd. metatarsal head (MH3), MH4 and 5th. metatarsal head (MH5) were significantly negatively correlated with QA. Pressure-time integral (PTI) under the MH4 and MH5 were found to be significantly negatively correlated with QA. A significant correlation was also found between QA and NH (p < 0.0001), whilst there was no correlation between QA and CTA. Regression analysis showed that NH was appeared as the major contributor for the QA (β = −0.49, p < 0.001) in the dynamic condition, followed by BT-FTI (β = 0.37, p < 0.001) and MH5-MxF (β = −0.21, p < 0.037).ConclusionThese findings may imply that the NH which can at least be controlled by appropriate shoe inserts may affect QA. This way, loading pattern of both plantar region and whole lower extremity may be altered.Level of evidenceLevel III, Diagnostic Study.     

No Correlation Between Clinical Outcomes and Changes in the Tibia-Metaphyseal Angle Following Total Knee Arthroplasty: A Retrospective Study

BackgroundDespite numerous advances in the implant design and surgical technique, improvement in patient satisfaction following total knee arthroplasty (TKA) has plateaued. Various TKA alignment strategies have been introduced that impact the coronal positioning of the tibial component relative to the native joint line. This study aims to analyze if postoperative variance of the joint line from preoperative native alignment is correlated with changes in patient-reported outcomes following primary TKA.MethodsA retrospective review of an academic center’s patient population identified all primary TKAs between 2013 and 2021 with full-length, standing radiographs and patient-reported outcome measures (PROMs) data. These measures included the Knee injury and Osteoarthritis Outcome Score for Joint Replacement, Patient-Reported Outcome Measurement Information System, and Veterans RAND 12 scores. Preoperative and postoperative radiographic measurements for hip-knee angle, tibia-metaphyseal angle, tibial-axis orientation angle, and joint-line obliquity angle were recorded. Three-month, 1-year, and 2-year PROM scores were correlated with the change in degrees for each of the angles using a Spearman’s correlation. A Mann-Whitney U-test was used to compare angular changes with a change in PROM scores.ResultsOne hundred and ninety nine patients (204 knees) with a mean age of 67 years were included. Average follow-up was 23 months. Three-month, 1-year, and 2-year follow-up rates were 93%, 64%, and 34%, respectively. Improvements were seen across all PROMs regardless of an angular change.ConclusionThere were no clear correlations between PROMs and variation in joint line obliquity in the coronal plane. These data suggest that the magnitude of the variation in coronal tibial alignment from native alignment does not impact PROMs. Further study is indicated to correlate an angular change with functional measures.     

Posterior-Stabilized Antibiotic Cement Articulating Spacer With Endoskeleton-Reinforced Cam Reduces Rate of Post-Cam Mechanical Complications in Prosthetic Knee Infection: A Preliminary Study

BackgroundPosterior-stabilized antibiotic cement articulating spacers (PS spacers) reduce spacer mechanical complications in prosthetic knee infections (PKIs); however, joint dislocation after femoral cam fracture has been reported. We hypothesized that the rate of post-cam mechanical complications is lower in PS spacers with an endoskeleton-reinforced cam.MethodA retrospective study of PKIs using PS spacers with or without a Kirschner wire–reinforced cam (K-PS or nK-PS spacers, respectively) was conducted between 2015 and 2019. The rates of post-cam mechanical complications and reoperation, as well as risk factors for post or cam failure, were analyzed.ResultsThe cohort included 118 nK-PS and 49 K-PS spacers. All patients were followed up for 2 years. The rate of joint subluxation/dislocation after femoral cam fracture was lower in K-PS (0%) than in nK-PS spacers (17.8%; P = .002). The reoperation rate for spacer mechanical complications was lower in K-PS (0%) than in nK-PS spacers (11.9%; P = .008). The identified risk factors for femoral cam fractures were body mass index ≥25 kg/m², femoral spacer size ≤2, and surgical volume ≤12 resection arthroplasties per year.ConclusionThis preliminary study highlights that K-PS spacers have a lower rate of post-cam mechanical complications than nK-PS spacers. We recommend the use of PS spacers with endoskeleton-reinforced cam when treating PKIs performed by surgeons with lower surgical volumes, especially in patients with higher body mass index and smaller femoral spacer sizes.     

Effect of Day Optimizing Throughput (Dot) Knee Software Implementation on Magnetic Resonance Imaging Workflow Efficiency

PurposeAttempts by magnetic resonance (MR) manufacturers to help imaging centres improve patient throughput has led to the development of more automated acquisition. This software is capable of customizing individual scan alignment; potentially improving imaging efficiency and standardizing protocols. However, substantial investments are required to introduce such systems, potentially deterring their widespread application. This study assessed the implementation costs and reduction in examination durations for automated knee MR imaging (MRI) software.Materials and MethodsResearch activities were performed at a community-based academic centre on a 3-Tesla (3-T) system using Siemens' Day Optimizing Throughput (Dot) knee software. Examination acquisition times were extracted from the system before and after software implementation. Fiscal year 2012/13 finances were used to determine the average hourly cost of MRI utilization. Costs associated with automated software implementation were also calculated. Finally, the number of knee scans required to achieve a positive return on investment using the software was established.Results and DiscussionThe mean (standard deviation, sample size) pre- and post-Dot software scan times were 23.20 (4.18, n = 266) and 21.94 (4.51, n = 59) minutes, respectively, for a routine knee scan and 11.88 (1.60, n = 74) and 11.24 (1.51, n = 27) minutes, respectively, for a fast knee scan. The overall weighted average resulted in a 64-second time savings per automated knee examination. This negligible time savings would be extremely difficult to make use of clinically. Dot simplified 29 unique knee protocols to two, improving the consistency of knee examinations. Current Dot software is not compatible with all patients and therefore has limitations that are a concern among MR technologists.ConclusionAdoption of automated knee systems could assist in standardizing protocols; however, the cost of implementation and difficulty in modifying patient scheduling to reflect the minimal time savings would make a financial return unlikely to occur at small- and medium-sized institutions.     

Prosthetic aortic valve thrombosis: To fibrinolyse or not to fibrinolyse? That is the question!

Prosthetic heart valve (PHV) dysfunction is a rare but serious complication whose optimal management may be challenging and requires a multidisciplinary approach. Treatment success ultimately depends on determining the underlying mechanism of valve dysfunction by echocardiography. However, being able to establish the main etiology is not always straightforward. We present a difficult case of obstructive PHV dysfunction and discuss clinical and echocardiographic parameters to help differentiate thrombus from pannus formation.     

Prosthetic treatment in the adult French population: Prevalence and relation with demographic,socioeconomic and medical characteristics

BackgroundThe aim of this study was to estimate the prevalence of dental prosthetic treatment and to investigate the demographic, social, economic and medical factors associated with the use of fixed and removable dentures in a representative sample of adults living in France.MethodsThe data were obtained from the 2002–2003 Decennial Health Survey, a cross-sectional study of a representative sample of the population living in France, which included 29,679 adults. Information was collected by interview. The variables collected were fixed denture, removable denture, age, gender, number of children, area of residence, nationality, educational attainment, family social status, employment status, annual household income per capita, supplementary insurance, chronic disease, eyesight problems/glasses, hearing problems/hearing aids. Multinomial logistic regression models were used to study the relationship between prosthetic treatment and demographic, socioeconomic and medical characteristics unadjusted, adjusted for age and adjusted for all the characteristics.ResultsThe prevalence of prosthetic treatment was 34.6% (95% confidence interval (CI): [34.1; 35.2]) for fixed prosthetic dentures and 13.8% (95% CI: [13.4; 14.2]) for removable prosthetic dentures. We showed a gradient between educational attainment and removable dentures; the odds ratio adjusted for all the variables (aOR) associated with no or primary education compared to post-secondary education was 2.56; 95% CI: [2.09; 3.13]. When annual household income per capita was low, subjects were less likely to report fixed dentures (aOR = 0.68; 95% CI: [0.62; 0.75]) than those with high annual household income per capita. Individuals without insurance less often reported fixed dentures than those with private insurance. Those reporting chronic disease were less likely to report fixed dentures (aOR = 0.87; 95% CI: [0.79; 0.95]) but more likely to report removable dentures (aOR = 1.29; 95% CI: [1.17; 1.43]) than those without chronic disease.ConclusionThis study reveals social, economic and medical inequalities in fixed and removable prosthetic treatment among adults in France.