Precision and Accuracy of Measurements on CT Scout View

ObjectivesThe purposes of this study were to (1) investigate the limits of measurements on scout view in three computed tomography axes, x, y and z and (2) develop a model to provide better understanding of measurement accuracy.MethodsFor the first objective, anteroposterior and lateral scout views of a Catphan phantom 200 mm in diameter and length were acquired with a GE scanner at 21 different table heights. Phantom measurements on scout view were performed by two experienced readers. The comparison of their measures provided estimation of precision. The accuracy was assessed by determining the bias, calculated as the difference between the values measured on scout view and the real phantom size. Second, a model was developed investigating the relationship between the dimensions of the object, its image, and the table height. This relationship was tested on our data.ResultsScout view measurements were precise, with less than 0.53% difference between readers. In addition, small biases of about 1 mm were detected in the z-axis, whatever the table height. In the other axes, serious biases from −13 to +73 mm were measured. Furthermore, at isocentre, overestimations up to 7 mm were shown. The results also indicated that biases in scout view measurements are because of the geometrical projection related to the object-detector distance.ConclusionsMeasurements in the table movement axis are precise and accurate, conferring to scout views an added value for preoperative planning in orthopedic surgery.     

Contemporary bone loss options: Rebuild,reinforce, and augment

Bone loss is commonly encountered during revision total knee arthroplasty (TKA). Small defects can be adequately managed with cement filling (with or without screws), modular prosthetic augments, and morselized allograft. For larger defects, cancellous impaction grafting and structural allografts have traditionally been utilized. More recently, highly porous tantalum cones and titanium sleeves have been designed to achieve axial and rotational stability in the metaphysis and subsequent biologic fixation. Sleeves are linked to one type of prosthesis, whereas cones are unlinked and can be used with any implant design. Multiple studies have demonstrated excellent survivorship and radiographic osseointegration at mid-term follow-up. This article provides a review of contemporary methods of bone loss management with a focus on highly porous metals and an emphasis on the authors’ preferred method for managing the severe bone loss in revision TKA.     

Polyethylene in knee arthroplasty: A review

Polyethylene (PE) has been used extensively in knee arthroplasty since the mid 20th century. Progress in material manufacturing and processing has led to newer polyethylenes over last few decades with different material properties. It has been established that PE wear in knee arthroplasty causes particle induced osteolysis which is the main reason for late failure and requires revision surgery. Although there are various causes of wear, the properties of PE have long been a matter of investigation as a contributory factor. The advent of newer highly cross linked PE has been shown to improve wear rates in hip arthroplasty but the benefits have not been shown to be of the same degree in knee arthroplasty. The laboratory and clinical studies so far are limited and slightly conflicting in their conclusions. The risks of using highly cross linked PE in knee arthroplasty include tibial post fracture, disruption of locking mechanism, liner fracture which can lead to increased wear and osteolysis. The current evidence suggests that highly cross linked polyethylenes should be used with caution and only considered in younger active patients. The results of a recently completed randomized trial to compare the conventional with high molecular weight PE in knee arthroplasty are awaited.     

Longer Operative Time Results in a Higher Rate of Subsequent Periprosthetic Joint Infection in Patients Undergoing Primary Joint Arthroplasty

Background

Whether prolonged operative time is an independent risk factor for subsequent surgical site infection (SSI) and periprosthetic joint infection (PJI) following total joint arthroplasty (TJA) remains a clinically significant and underexplored issue. The aim of this study is to investigate the association between operative time and the risk of subsequent SSI and PJI in patients undergoing primary TJA.

Anatomically contoured large femoral heads can reduce iliopsoas impingement: A cadaver verification study

While use of large heads in total hip arthroplasty (THA) continues to grow, concerns have been raised regarding anterior hip pain resulting from impingement of the prosthetic head against soft-tissues like the iliopsoas. To address these concerns, a new anatomically contoured head (ACH) was developed. In this study cadaver tests were utilized to show that iliopsoas impingement/tenting caused by conventional heads is significantly relieved with the more rounded and reduced distal profile of the ACH. Thus, the ACH implant may be able to decrease the risk of soft-tissue impingement with conventional heads, particularly in the smaller hip.     

Accuracy and Precision of Acetabular Component Placement With Imageless Navigation in Obese Patients

Background

Obesity is a risk factor for acetabular component malposition when total hip arthroplasty is performed with manual techniques. The utility of imageless navigation in obese patients remains unknown. This study compared the accuracy and precision of imageless navigation for component orientation between obese and nonobese patients.

Adductor Canal Block or Local Infiltrate Analgesia for Pain Control After Total Knee Arthroplasty? A Systematic Review and Meta-Analysis of Randomized Controlled Trials

Background

Total knee arthroplasty is a treatment option for debilitating arthritis. In the postoperative period, patients experience moderate to severe pain affecting the rehabilitation, hospital stay, and patient satisfaction. This study aims at utilizing current best evidence to determine whether adductor canal block (ACB) or periarticular injection (PAI) is a better modality for managing short-term postoperative pain and opioid consumption.

Effect of Day Optimizing Throughput (Dot) Knee Software Implementation on Magnetic Resonance Imaging Workflow Efficiency

PurposeAttempts by magnetic resonance (MR) manufacturers to help imaging centres improve patient throughput has led to the development of more automated acquisition. This software is capable of customizing individual scan alignment; potentially improving imaging efficiency and standardizing protocols. However, substantial investments are required to introduce such systems, potentially deterring their widespread application. This study assessed the implementation costs and reduction in examination durations for automated knee MR imaging (MRI) software.Materials and MethodsResearch activities were performed at a community-based academic centre on a 3-Tesla (3-T) system using Siemens' Day Optimizing Throughput (Dot) knee software. Examination acquisition times were extracted from the system before and after software implementation. Fiscal year 2012/13 finances were used to determine the average hourly cost of MRI utilization. Costs associated with automated software implementation were also calculated. Finally, the number of knee scans required to achieve a positive return on investment using the software was established.Results and DiscussionThe mean (standard deviation, sample size) pre- and post-Dot software scan times were 23.20 (4.18, n = 266) and 21.94 (4.51, n = 59) minutes, respectively, for a routine knee scan and 11.88 (1.60, n = 74) and 11.24 (1.51, n = 27) minutes, respectively, for a fast knee scan. The overall weighted average resulted in a 64-second time savings per automated knee examination. This negligible time savings would be extremely difficult to make use of clinically. Dot simplified 29 unique knee protocols to two, improving the consistency of knee examinations. Current Dot software is not compatible with all patients and therefore has limitations that are a concern among MR technologists.ConclusionAdoption of automated knee systems could assist in standardizing protocols; however, the cost of implementation and difficulty in modifying patient scheduling to reflect the minimal time savings would make a financial return unlikely to occur at small- and medium-sized institutions.