Eccentric and concentric torque-velocity relationships during arm flexion and extension

Summary Forty men were tested with a computerized dynamometer for concentric and eccentric torques during arm flexion and extension at 0.52, 1.57, and 2.09 rad·s^–1. Based on the summed concentric and eccentric torque scores, subjects were placed into a high strength (HS) or low strength (LS) group. The eccentric and concentric segments of the torque-velocity curves (TVCs) were generated using peak torque and constant-angle torque (CAT) at 1.57 and 2.36 rad. Angle of peak torque was also recorded. Compared to LS, HS had significantly greater estimated lean body mass (+ 10.2 kg) and approximately 25% greater average torque output. Reliability of the peak torque scores on 2 days in 20 subjects wasr0.85. The difference between observed torques and the mathematically computed criterion torque scores averaged 1% for three validation loads that ranged from 11.4 to 90.4 kg. Statistical analysis revealed that torque output in LS plateaued at low concentric velocities and was also flattened with increasing eccentric velocities. Conversely, torque ouptput for HS increased with decreasing concentric velocities and increased with increasing eccentric velocities. The method of plotting the TVCs for peak or CAT did not influence the pattern of TVC. Eccentric flexion peak torque occurred at a significantly shorter muscle length (1.88 rad) than concentric torque (2.12 rad). This difference was also present for extension; it was 1.88 rad for eccentric and 2.03 rad for concentric torque. These findings are discussed in terms of study design, neural inhibition, activation history, muscle-tendon elasticity, muscle fiber types, muscle architecture, and methodological considerations. The present results illustrate the importance of strength level to explain individual differences in TVC.     

Resecciones pulmonares anatómicas por vía robótica: análisis de la curva de aprendizaje

IntroductionRobotic surgery has become a safe and effective approach for the treatment of pulmonary surgical pathology. However, the adoption of new surgical techniques requires the evaluation of the learning curve. The objective of this study is to analyze the learning curve of robotic anatomical lung resections.MethodsRetrospective analysis of all robotic anatomical lung resections performed by the same surgeon between June 2018 and March 2020. The learning curve was evaluated using CUSUM charts to estimate trend changes in surgical time, surgical failure and the occurrence of post-operative cardiorespiratory complications throughout the sequence of cases.ResultsThe study included a total of 73 cases. The median duration of all complications was 120 min (interquartile range: 90-150 min), the prevalence of surgical failure was 23.29%, while 4/73 patients had any postoperative cardiorespiratory complication. Based on the CUSUM analysis, the learning curve was divided into 3 different phases: phase i (from the first to the 14th intervention), phase ii (between the 15th and 30th intervention) and phase iii (from the 31st intervention).ConclusionsThe learning curve for robotic anatomical lung resections can be divided into 3 phases. The technical competence that guarantees satisfactory perioperative outcomes was achived in phase iii from the 31st intervention.     

Abbreviated cyclosporine AUCs on Neoral – the search continues!

 Cyclosporine is a powerful immunosuppressant with a narrow therapeutic window and considerable inter- and intrapatient variability. The pre-dose trough concentration (C_min) is commonly used for therapeutic drug monitoring. With the new microemulsion (Neoral), intrapatient variability was reduced. However, the usefulness of Neoral C_min was questioned. Firstly, because of the improved and more-rapid absorption, accidental intake before blood sampling has a greater impact on C_min than with classic cyclosporine. Secondly, C_min may be low despite high drug exposure, due to rapid clearance in children. A full pharmacokinetic (PK) profile with determination of the area under the curve (AUC) is expensive and cumbersome, and therefore a search for an abbreviated AUC began. Here, we present a retrospective analysis of 84 PK profiles from 78 pediatric renal transplant recipients. By analysis of rejection episodes and toxicity, we estimated a target AUC above 5,000 ng×h/ml in the early post-transplant period and 3,900 ng×h/ml beyond 100 days. The abbreviated AUC using the 2- and 6-h concentrations (C2 and C6) and a simple estimate derived from the 3-h concentration (C3) were equally well correlated with the AUC. From our data, we recommend a target C3 at approximately 800 ng/ml early after transplantation and 450–550 ng/ml beyond 100 days. Received: 28 January 1998 / Revised: 10 June 1998 / Accepted: 15 June 1998     

Epidemiological aids to clinical decision making in primary open angle glaucoma

We have described the epidemiological analysis of one aspect of the King's College Hospital computerised data base; namely initial intraocular pressure as an indicator of visual field loss. The methods involved the use of the four-fold table to determine sensitivity and specificity at different pressure levels. From these results (1) the changes in the pre and post test probability of field loss are calculated and (2) a sensitivity/specificity trade off curve or decision curve is constructed. In this way the optimal cut-off level or operating point for a population of specific type and composition can be determined. The factors concerned in decision making are always complex but such an approach allows a rational and quantifiable alternative to reliance on clinical impression and intuition. The results have significance in relation to decisions on the management of patients and on population screening programmes for glaucoma.     

Properties of hemoglobin and dextran-hemoglobin rightshifted by oxidized inositol tetrakisphosphate

Phytate was digested by wheat bran phytase to yield inositol tetrakisphosphate. Periodate-oxidized inositol tetrakisphosphate (oxyIP4) was coupled by means of reductive alkylation to hemoglobin and the covalent dextran-hemoglobin conjugate to yield the rightshifted (rs) compounds rsHb and rsDxHb, respectively. The variations of the oxygen dissociation curves of these molecules with pH and temperature were compared to those of hemoglobin. The variations with pH were found to be less pronounced for these rightshifted forms. An extensive decrease in the half-saturation oxygen tension was observed, however, with both rsHb and rsDxHb, as in the case of unmodified Hb. Modification of hemoglobin by oxyIP4 at the polyphosphate site was suggested by the lack of a further rightshifting effect of phytate on rsHb, and by the similarity between the difference spectrum of rs-methemoglobin and the difference spectrum induced by the addition of phytate.     

Distribution of lithium elimination rates in a selected population of psychiatric patients

Summary Chronic treatment with conventional lithium carbonate was interrupted in a selected group of 40 psychiatric patients of mixed sex and race. All patients had normal renal function. Serum samples were taken 12, 24, 36 and 48 h after the last dose and lithium was assayed by atomic absorption spectrophotometry. Decay rates calculated for the 12–24 h and 36–48 h periods yielded different values. This was ascribed to the presence of an incomplete redistribution phase during the earlier period. The distribution of elimination rates determined during the later period gave a more symmetrical spread and approximated a normal distribution. The mode, median, mean and standard deviation of the lithium elimination half-lives were 12.5, 14, 18.2 and 7.3 h and 22.5, 24.5, 29.8 and 10.1 h for the two periods, respectively. The results contrast sharply with another report of the distribution spread of elimination half-lives in a much larger sample. The current values have implications for dosage prediction, serum level monitoring and dosage formulation, especially sustained-release preparations. The evidence was against the possibility that some individuals retain lithium.     

胎儿生长的数学模型

根据孕 16～ 2 8周胎儿双顶径、头围、腹围及股骨长等的超声测量值拟合 Rossavik数学模型 [P=c(t) k+ s( t) ]建立胎儿个体生长曲线。结果显示 ,2 0例正常单胎的超声参数与 Rossavik模型的拟合效果好 ,孕 2 8～ 41周胎儿各项参数的模型预测值与实测值比较均无显著差异     

Is normal β-hCG regression curve helpful in the diagnosis of persistent trophoblastic disease?

OBJECTIVE: The aim of this study was to evaluate the probable usefulness of normal beta-human chorionic gonadotropin (beta-hCG) regression curve in the diagnosis of persistent trophoblastic disease (PTD). METHODS: A log-value regression curve was developed from the means and 95% confidence limits of serial weekly serum beta-hCG titers of 43 patients with uneventful complete hydatidiform moles and 14 patients, who were previously confirmed as PTD. RESULTS: All 14 PTD patients (100%) had abnormal values, beyond normal range, within 4 weeks. beta-hCG was in its upper values, compared to normal regression curve at 2.29 +/- 0.19 weeks. This was earlier than plateau or rise detection at 4.21 +/- 0.33 weeks (P < 0.001). Within 3 weeks of evacuation, 13 of 14 (92.86%) PTD patients' beta-hCG values exceeded the normal range, whereas only six of 14 (42%) showed a rise or plateau. CONCLUSION: Our finding indicates that the normal beta-hCG regression curve may be useful for quicker detection of PTD than the plateau or rise of level.     

Electrochemical Corrosion Behaviour of X70 Steel under the Action of Capillary Water in Saline Soils

In this paper, the electrochemical corrosion behavior of X70 steel in saline soil under capillary water was simulated by a Geo-experts one-dimensional soil column instrument. A volumetric water content sensor and conductivity test were used to study the migration mechanism of water and salt (sodium chloride) under the capillary water. The electrochemical corrosion behavior of the X70 steel in the corrosion system was analyzed by electrochemical testing as well as the macroscopic and microscopic corrosion morphology of the steel. The test results showed that the corrosion behavior of X70 steel was significantly influenced by the rise of capillary water. In particular, the wetting front during the capillary water rise meant that the X70 steel was located at the three-phase solid/liquid/gas interface at a certain location, which worsened its corrosion behavior. In addition, after the capillary water was stabilized, the salts were transported with the capillary water to the top of the soil column. This resulted in the highest salt content in the soil environment and the most severe corrosion of the X70 steel at this location.     

Study on Hot Deformation Behavior of an Antibacterial 50Cr15MoVCu Tool Steel

Hot deformation behaviors of an antibacterial 50Cr15MoVCu tool steel were studied. The flow stress curves presented three typical characteristics: (i) a single peak dynamic recrystallization curve, (ii) a monotone incremental work-hardening curve, and (iii) the equilibrium dynamic recovery curve. The flow stress increased with the increase of the deformation rate at each deformation temperature and decreased with the increase of the deformation temperature at the same deformation rate. The thermal activation energy and material constants were Q of 461.6574 kJ/mol, A of 3.42 × 10¹⁷, and α of 0.00681 MPa⁻¹, respectively. The high temperature constitutive equation was: Z=ε˙expQ/RT=3.42×1017sinh0.0068×σ5.6807. Based on the processing maps and microstructure evolution, the best hot working process was a deformation temperature of 1050 °C and deformation rate of 0.001 s⁻¹.