羟甲基烟酰胺分散片的研制

目的：研制羟甲基烟酰胺分散片。方法：以崩解时间为指标。比较几种崩解剂的作用，以正交试验设计确立最佳处方，并与普通片进行体外溶出度比较。结果：崩解剂以低取代羟丙纤维素(L-HPC)效果最优，最佳处方崩解时间为78．9S，溶出速度远大于普通片。结论：所研制的羟甲基烟酰胺分散片溶出迅速。     

Specific statistical considerations relevantto the design and analysis of gingivitis trials demonstrating

Simulation studies were conducted to address specific statistical issues which arise in the design and analysis of gingivitis studies whose principal aim is the demonstration of superiority or equivalence of one product to another. The effects of measurement scale, using differences or ratios of group means, particular statistical test produces and specific rules demonstrating superiority or equivalence were investigated. An alternative concept to equivalence—denoted “least as good”—was also defined and evaluated. For a wide class of possible distributions of gingivitis scores, characterized by specific gamma distributions, the student-t test applied to means of subject GI gingivitis scores proved to be the most powerful of the test produces considered, having statistical properties quite similar to the randomization or permutation test procedure. Transformations of subject GI mean gingivitis scores did not produce an advantage in demonstrating either superiority or equivalence, and in some cases made it more difficult. Little difference was observed in test results when using the difference in group means as compared with using the ratio of group means for demonstrating either equivalence or superiority. The clinically significant rule produced the lowest false-positive rates for products slightly better than the active control, and similar false-positive and -negative rates as the statistically significant rule for products clearly superior to the active control. Demonstration of product equivalence will require more subjects per group than demonstrating product superiority, the size of this difference being a function of the definition of superiority that is accepted. Showing that the 90% confidence interval for 100*R is completely contained within the [90%, 110%] interval is the preferred method of demonstrating equivalence today, although much more research needs to be done to improve methods for demonstrating product equivalence. The “least as good” alternative to “equivalence” makes it easier to demonstrate “equivalence” for products slightly better than the active control product, but both experience great difficulty in demonstrating equivalence for lest products not quite as good as the active control.     

Computer-Assisted Design of an Implantable, Intrathoracic Artificial Lung

Abstract: A semiempirical mathematical model of convective oxygen transport is used to design a new, low pressure loss, implantable artificial lung that could be used as a bridge to lung transplantation in patients with advanced respiratory failure. The mass transfer and flow friction relations pertinent to the design of a cross–flow hollow fiber membrane lung are described. The artificial lung is designed to transfer over 200 ml/min of oxygen at blood flow rates up to 5 L/min. A compact design and a blood-side pressure loss of <15 mm Hg allows the device to be implanted in the left chest without the need for a prosthetic blood pump. Surgical implantation of the artificial lung would require the creation of inflow and outflow anastomoses. Oxygen would be supplied via an external source. Blood properties, operating conditions, and empirically determined mass transfer and flow properties are all specified and input into a computer program that numerically solves the design equations. Computer–generated values for the device frontal area, blood path length, and fiber surface area are thereby obtained. The use of this computer–assisted design minimizes the need for extensive trial–and–error testing of prototype devices. Results from in vitro tests of a prototype implantable lung indicate that the mathematical model we describe is an accurate and useful tool in the design of hollow fiber artificial lungs.     

How adverse drug reactions can play a role in innovative drug research

We describe how adverse drug reactions (ADRs) can play an important role in pharmaceutical research and drug development. Not only do ADRs represent the risks and drawbacks associated with drugs but they can also be related to other knowledge available in pharmaceutical and medical research. We offer a model that can be used to systematically map the pathways through which ADRs can lead to innovative research. These pathways include chemical, therapeutic or pathophysiological steps that can be taken to arrive at new knowledge based on ADRs. We used the development of angiotensin-converting enzyme inhibitors, especially captopril, as a case study. The similarity between the ADR profiles of captopril and penicillamine was a starting point for further innovation. Historical analysis shows that in several instances research in the field of angiotensin-converting enzyme inhibitors has been triggered by ADRs. The model presented here might be applicable to other areas of innovative drug research.     

提取青蒿素实验条件的研究

对从青蒿叶中提取青蒿素的各种方法及实验条件进行实验比较，结果表明，采用索氏提取法及以Ｂ号油为溶剂，具有提取率较高，时间短、操作方便、耗油少等特点。     

Optimization of localized 19F magnetic resonance spectroscopy for the detection of fluorinated drugs in the human liver.

Fluorine MR spectroscopy ((19)F MRS) is an indispensable tool for assessing the pharmacokinetics of fluorinated drugs. Since the metabolism of 5-fluorouracil (5FU), a frequently used cytotoxic drug, is expected to be different in normal liver and in tumor tissue, spatial localization is required for detection by MRS. In this study, three independent signal-to-noise ratio (SNR) optimizations were combined to enable chemical shift imaging (CSI) as a localization method in the detection of 5FU and its metabolites in tumor tissue. First, the hardware was optimized by using circularly polarized coils together with integrated preamplifiers. Second, the optimal pulse angle (Ernst angle) was determined on the basis of T(1) relaxation time measurements of 5FU. Finally, averaging of CSI phase-encoding steps was optimized by using the applied Hamming filter as a weighting function. The combination of these three methods enables the in vivo detection of 5FU and alpha-fluoro-beta-alanine (FBAL) by (19)F MRS, localized in three dimensions in tumor and liver tissue at a time resolution of 4 min at 1.5 Tesla.     

On the synthesis of time‐varying LQG weights and noises along optimal control and state trajectories

A general approach to control non‐linear uncertain systems is to apply a pre‐computed nominal optimal control, and use a pre‐computed LQG compensator to generate control corrections from the on‐line measured data. If the non‐linear model, on which the optimal control and LQG compensator design is based, is of sufficient quality, and when the LQG compensator is designed appropriately, the closed‐loop control system is approximately optimal. This paper contributes to the selection and computation of the time‐varying LQG weighting and noise matrices, which determine the LQG compensator design. It is argued that the noise matrices may be taken time‐invariant and diagonal. Three very important considerations concerning the selection of the time‐varying LQG weighting matrices are turned into a concrete computational scheme. Thereby, the selection of the time‐varying LQG weighting matrices is reduced to selecting three scalar design parameters, each one weighting one consideration. Although the three considerations seem straightforward they may oppose one another. Furthermore, they usually result in time‐varying weighting matrices that are indefinite, rather than positive (semi) definite as required for the LQG design. The computational scheme presented in this paper addresses and resolves both problems. By two numerical examples the benefits of our optimal closed‐loop control system design are demonstrated and evaluated using Monte Carlo simulation. Copyright © 2005 John Wiley & Sons, Ltd.     

Design and conduct of occupational epidemiology studies: I. Design aspects of cohort studies

Cohort and case-control studies are two standard approaches for investigating the etiology of occupational diseases. This paper, which is the first of a four-part series, contains a review of the design features of occupational cohort studies. Topics discussed include the basic features of prospective and historical cohort studies, options for defining the cohort, disease incidence ascertainment, and considerations involved in planning an occupational cohort study. Subsequent papers in this series will focus on data analysis of occupational cohort studies and the design and analysis of occupational case-control studies.     

外语多媒体软件界面设计的认知策略模式

外语学习软件界面的设计除了应注意实现软件功能的技术因素、表现媒体的物理性状以及信息内容的学科把握 ,还应对软件界面的内容组织方略、交互通达方式、语用认知功能等方面提出要求。界面设计的出发点 ,应该是学生、学习任务及其相应的学习活动。应该根据需求分析、学习者分析、任务和内容分析来确定目标和步骤。外语教学应以语言能力、交际能力、学习策略能力为目标 ,界面设计应以此为据选择表现媒体、结构层次、交互方式和技术手段。     

The logical structure and validity of experimental designs in pharmacokinetics and clinical pharmacology

Much of the literature on research design in clinical pharmacology and pharmacokinetics emphasizes statistical concerns, thus suggesting that a primary ingredient of a valid research design is an appropriate plan for statistical analysis of data. However, statistical validity is only one of several ways to evaluate an experimental study. The present paper reviews the underlying logic and sources of invalidity of experimental drug research suggesting influences and factors which may deceive or lure an experimenter into erroneous conclusions.