Effects of a summer school-readiness programme on measures of literacy and behaviour growth: a pilot study

Young children enter kindergarten with varying levels of readiness and abilities to learn. One factor that contributes to lower levels of school readiness is poverty. One timely, cost-effective, and feasible strategy to boost school readiness, regardless of exposure to high-quality preschool is to leverage the summer months prior to kindergarten entry and provide comprehensive, evidence-based programming immediately before the school year begins. The current study implemented a community-based summer programme targeted at improving school readiness for 25 four- and five-year-old children in a low-income community. Across the 9-week study, children participated in two types of early literacy activities and the Incredible Years social/emotional learning curriculum. Results indicate that participants demonstrated significant growth across three early literacy skills and were rated as overall stable regarding their behaviour across the summer. These results are discussed along with implications and future directions in this line of research.     

An electronic travel guide for visually impaired – vehicle board recognition system through computer vision techniques

Abstract

Purpose: In the context of assistive technology, mobility takes the meaning of “moving safely, gracefully, and comfortably”.The aim of this article is to provide a system which will be a convenient means of navigation for the Visually Impaired people, in the public transport system.

Method: A blind regular commuter who travels by public transport facility finds difficulty in identifying the vehicle that is nearing the stop. Hence, a real-time system that dynamically identifies the nearing vehicle and informs the commuters is necessary. This paper proposes such a system namely the “Vehicle Board Recognition System” (VBRS). Computer Vision techniques such as segmentation, object recognition, text detection and optical character recognition are utilized to build the system, which will detect, analyze, derive and communicate the information to the passengers.

Results: Thanks to the rapid development in technology, there are several navigation systems both hand held and wearable, available to help visually impaired (VI) people move comfortably both indoor and outdoor. Many blind people are not comfortable in using these devices or they are not affordable for them. Thus the proposed system gives them the comfort of navigation.

Conclusion: This system can be installed in the bus stop to assist the Visually Impaired, from externally rather than their hand held or wearable assistive devices.

• Implications for rehabilitation

• This proposed system will help the visually impaired to

• ensure secure navigation

• be independent of the others

• develop self confidence.

• overcome the training, affordability of wearable/ handheld devices.

     

基于荧光定量PCR技术的当归不同炮制品中大肠埃希菌数量测定方法开发及比较研究

目的对当归不同炮制品中大肠埃希菌变化进行定量分析。方法建立荧光定量PCR方法,对当归不同炮制品、不同产地、不同收集企业、不同储藏时间的大肠埃希菌进行定量分析。结果不同炮制品中大肠埃希菌数量变化为生当归土炒当归酒当归;在不同产地的当归中以甘肃岷县地区所含的大肠埃希菌的数量最少;与零售企业相比,生产销售企业的当归和酒当归中大肠埃希菌的数量较少;不同储藏时间对当归和酒当归中大肠埃希菌数量有一定影响,随储藏时间的增加,大肠埃希菌的数量也在增加。对部分代表性样品进行平板计数法与荧光定量PCR法比较时发现,平板计数法结果多呈阴性,荧光定量PCR结果均呈阳性。结论所建立的荧光定量PCR法特异性、灵敏度、可靠性以及报告周期均优于平板计数法,可为当归不同炮制品中大肠埃希菌的快速、准确定量检测提供有效手段。     

Health technology assessment with risk aversion in health

Standard cost-effectiveness models compare incremental cost increases to incremental average gains in health, commonly expressed in Quality-Adjusted Life Years (QALYs). Our research generalizes earlier models in several ways. We introduce risk aversion in Quality of Life (QoL), which leads to “willingness-to-pay” thresholds that rise with illness severity, potentially by an order of magnitude. Unlike traditional CEA analyses, which discriminate against persons with disabilities, our analysis implies that the marginal value of improving QoL rises for disabled individuals. Our model can also value the uncertain benefits of medical interventions by employing well-established analytic methods from finance. Finally, we show that traditional QALYs no longer serve as a single index of health, when consumers are risk-averse. To address this problem, we derive a generalized single-index of health outcomes—the Generalized Risk-Adjusted QALY (GRA-QALY). Earlier models of CEA that abstract from risk-aversion nest as special cases of our more general model.     

现代教育技术在执业药师远程继续教育中的应用研究

利用计算机技术，搭建执业药师网上远程继续教育的平台，将主管部门审核的有关执业药师继续教育的教学内容放到网上，供参加执业药师继续教育的人员浏览学习。通过加强管理，严格考核，变传统教学模式为现代教育方式，实现教育的个性化，有效提高执业药师的继续教育质量。     

Continuously moving table 3D MRI with lateral frequency-encoding direction.

A method is presented for 3D MRI in an extended field of view (FOV) based on continuous motion of the patient table and an efficient acquisition scheme. A gradient-echo MR pulse sequence is applied with lateral (left-right (L/R)) frequency-encoding direction and slab selection along the direction of motion. Compensation for the table motion is achieved by a combination of slab tracking and data alignment in hybrid space. The method allows fast k-space coverage to be achieved, especially when a short sampling FOV is chosen along the direction of table motion, as is desirable for good image quality. The method can be incorporated into different acquisitions schemes, including segmented k-space scanning, which allows for contrast variation with the use of magnetization preparation. Head-to-toe images of volunteers were obtained with good quality using 3D spoiled gradient-echo sequences. As an example of magnetization-prepared imaging, fat/water separated images were acquired using chemical shift selective (CHESS) presaturation pulses.     

浅谈哈萨克斯坦荒漠草地现状与改良利用

中国新疆与哈萨克斯坦共和国生态环境特点极为相似,荒漠、半荒漠草地类型占草原面积的首位。由草原研究所派出的科技交流团,先后考察了哈国荒漠草地现状与改良利用情况,就优良旱生牧草新品种选育和荒漠、半荒漠区无灌溉条件下人工草地建植与管理技术模式达成技术合作事宜。     

山药粗多糖的提取工艺

对鲜山药中水溶性粗多糖的提取工艺进行了研究,通过单因素试验和L9（34）正交试验,研究了料液比、提取温度、时间和乙醇体积分数对粗多糖得率的影响,极差分析及方差分析结果表明提取温度和料液比是影响山药粗多糖提取的主要因素,较优的工艺为料液比1 g：9 mL,温度50 ℃,时间2.5 h,乙醇体积分数75%,在此工艺条件下,鲜山药粗多糖得率为0.2449%（以鲜山药质量计）.     

Development of a new sensor based on micro-electro-mechanical systems for objective in vivo measurement of the cutaneous temperature: application to foundations

BACKGROUND/AIMS: The purpose of this work was to develop a new sensor for objective in vivo measurement of the cutaneous temperature based on micro-electro-mechanical systems (MEMS), and to compare these performances with those of a classical thermocouple. Research on this new sensor was carried out to allow the quantification of the thermal properties of the made-up skin. METHODS: Sixteen female subjects divided into two different age groups (18-35 and >50 years old) were recruited for this study. Several zones of the face and forearms were made up at random with foundations containing or not a thermoregulator raw material. The quantity of foundation applied on the skin was standardized and measurements were carried out first before make-up, and then 10 s and 5 min after make-up. The new sensor and the thermocouple were used successively on each zone. The cutaneous temperature was expressed in degrees celsius. RESULTS/CONCLUSION: The two systems are similar in terms of repeatability and reproducibility, with some differences in sensibility. The data measured by the MEMS sensor appear lower than those measured by the thermocouple. After make-up, the MEMS sensor detects a progressive increase of the temperature in time whereas the thermocouple detects a decrease. We found the same evolution on the face but in a more attenuated way. These results tend to show that the devices do not measure the same phenomenon. The thermocouple appears more sensitive to the thermal response of the made-up surface whereas the MEMS sensor appears more sensitive to the heat transfers in the interface between the skin and make-up.     

A new bioabsorbable sleeve for lung staple-line reinforcement (FOREseal™): report of a three-center phase II clinical trial

Objective: To investigate on the feasibility, safety, and effectiveness of a new bioabsorbable material for lung staple-line reinforcement. Methods: This prospective open trial included 66 patients (mean age of 56 ± 17 years) who underwent various types of lung resection using staplers with knitted calcium alginate sleeves for buttressing (FOREseal™, Laboratoires Brothier, Nanterre, France) at three academic centers: 29 lobectomies, 22 emphysema surgeries, 15 wedge resections or lung biopsies. Intraoperative air leakage was assessed at a mean respiratory peak pressure of 30 cmH₂O, and rated as grade 1, 2, or 3. Persistent air leakage in the postoperative course, as well as any relevant event, was assessed daily. The follow-up period was of 6 months. Results: No technical problem linked to the device occurred. Hemostasis of the cutting edges was completed in all patients. Fifty-six percent of the patients had no intraoperative air leak and 27.3% had grade 1 leaks. Mean postoperative air leaks and thoracic drainage times were 1.9 ± 2.3 days and 6 ± 5.3 days, respectively. In-hospital mortality was nil. There was no empyema. Mean hospital stay was 9.1 ± 6.6 days. At follow-up, one patient underwent lung transplantation, and pathology of the explanted specimen showed the absence of device-related foreign-body inflammation. One patient complained from metalloptysis, and another one, with a metastatic invasive aspergillosis, developed an infectious recurrence that required reoperation. Conclusions: FOREseal is an ergonomic, safe, and promising new material instead of nonabsorbable materials and xenomaterials for staple-line reinforcement. A randomized comparative study is now in progress.