西洋参锈腐病菌拮抗放线菌F05发酵培养基的优化

目的:从老参地土壤中分离得到一株对西洋参锈腐病菌具有良好拮抗作用的菌株F05,对该菌株的发酵培养基进行了初步研究,确定了其最佳培养基组成.方法:利用单因素试验和均匀设计试验优化培养基组分.结果:优化结果碳源为玉米秆粉,氮源为磷酸氢二铵,无机盐为硫酸镁、磷酸氢二钾,质量分数分别为3.720 6%,0.531 2%,0.035 5%,0.040 0%,优化后活菌生物量为1.57×10~9CFU·mL~(-1).     

中药敷脐治疗胸腰椎术后腹胀便秘的效果观察

目的探讨使用大黄厚朴煎剂热敷脐部治疗胸腰椎术后患者腹胀、便秘的疗效。方法选择2005年1月至2006年12月中山大学第二医院骨外科胸腰椎术后出现腹胀便秘的患者80例。分成两组,治疗组用大黄厚朴煎剂热敷脐部;对照组使用开塞露塞肛。观察两组患者肛门排气,排便,腹胀消除及停药复结情况。结果治疗组的总有效率95%,对照组总有效率70%;停药复结情况:治疗组5%,对照组42.5%;腹胀减轻情况:治疗组95%,对照组52.5%。结论大黄厚朴煎剂热敷脐能有效减轻肠胀气,软化大便,对于消除胸腰椎术后患者腹胀便秘明显优于使用开塞露塞肛效果。     

Development and optimization of an indirect enzyme-linked immunosorbent assay for the determination of Hexoestrol

An indirect enzyme-linked immunosorbent assay (ELISA) for the detection of hexoestrol (HES) was developed, optimized and validated for the analysis of HES in pork. Many parameters, such as the volume ratio of solution A and solution B, colour developing time, pH value, incubation time, the volume ratio of the standard solution and diluted antiserum, blocking solution, blocking condition, coating solution and coating condition were studied and optimized in the paper. The regression equation of the final inhibition curve is y = - 0.3345x + 1.4955, R²=0.9913. The linear range is 0.1-8.1 ng/ml, and the IC₅₀ is 0.671 ng/ml. The specificity of the assay was evaluated by the cross-reactivity rates of six compounds, of which two structurally related compounds had a relatively higher cross-reactivity rate of 25% and 6%. HES was added into a pork sample at 5 ng/g level and then the sample was extracted. The recovery is between 49.6% and 79.2%, and the variation coefficient is 0.164.     

聚酰亚胺纳米杂化材料的制备、结构和性能

介绍了聚酰亚胺（PI）纳米杂化材料的四种制备方法：溶胶－凝胶法、插层法、分散法、相转移分散聚合法。纳米粒子在PI材料中分散性良好。由于纳米粒子本身 性和纳米粒子改变了PI材料的应力作用点，随着SiO2,AIN等纳米粒子含量增加，PI杂化的玻璃化温度、热分解湿度、拉伸强度、断裂伸长率、杨式模量、密度增加，线性膨胀系数减少。对介电性能的影响因不同纳米材料而异。     

Optimized and combined T1 and B1 mapping technique for fast and accurate T1 quantification in contrast-enhanced abdominal MRI.

Fast T(1) mapping techniques are a valuable means of quantitatively assessing the distribution and dynamics of intravenously or orally applied paramagnetic contrast agents (CAs) by noninvasive imaging. In this study a fast T(1) mapping technique based on the variable flip angle (VFA) approach was optimized for accurate T(1) quantification in abdominal contrast-enhanced (CE) MRI. Optimization methods were developed to maximize the signal-to-noise ratio (SNR) and ensure effective RF and gradient spoiling, as well as a steady state, for a defined T(1) range of 100-800 ms and a limited acquisition time. We corrected B(1) field inhomogeneities by performing an additional measurement using an optimized fast B(1) mapping technique. High-precision in vitro and abdominal in vivo T(1) maps were successfully generated at a voxel size of 2.8 x 2.8 x 15 mm(3) and a temporal resolution of 2.3 s per T(1) map on 1.5T and 3T MRI systems. The application of the proposed fast T(1) mapping technique in abdominal CE-MRI enables noninvasive quantification of abdominal tissue perfusion and vascular permeability, and offers the possibility of quantitatively assessing dilution, distribution, and mixing processes of labeled solutions or drugs in the gastrointestinal tract.     

改良小儿胸腔镜心脏手术股动静脉插管材料的血液相容性及毒理学研究

目的 通过对改良小儿胸腔镜心脏手术股动静脉插管材料进行血液相容性及毒理学研究,评价其临床应用的可行性.方法 分别进行溶血实验、皮内刺激实验及小鼠全身急性毒性实验,通过测定吸光度值计算溶血率,按照标准制备的材料浸提液注射到兔的皮下和小鼠体内,观察72h兔皮肤病理变化及小鼠的全身反应.结果 改良小儿胸腔镜心脏手术股动静脉插管材料溶血率为1.58%,低于国际标准(5%);实验组兔皮肤无红斑、水肿及坏死;实验组小鼠无死亡、体重下降及明显全身异常反应.结论 所用材料符合医用材料的要求,可用于临床.     

苯胺衍生物掺杂的PMMA薄膜的二次非线性光学性能的稳定性研究

具有A-π-D电子结构的苯胺衍生物掺杂的玻璃态高聚物PMMA的有机薄膜经极化取向后显示很强的二次非线性光学性能,其取向弛豫是实用化的一个有待解决的重要问题。木文通过几种苯胺衍生物以不同百分比与PMMA掺杂,用紫外-可见吸收光谱、二次谐波强度测量、动态力学粘弹谱等方法进行了取向弛豫的机理研究,结果表明分子尺寸和形状以及偶极矩的大小对取向弛豫有显著影响。     

超细α-FeOOH制备过程研究 Ⅰ.制备工艺

以制备晶形、粒度、轴比等满足高性能磁粉要求的铁黄为目标,研究了碱法超细α-FeOOH合成的工艺配方和工艺条件对粒子性能的影响,包括碱比、气量、转速、Fe(OH)_2结晶条件、熟化时间等工艺参数的影响规律。重复稳定地制备出三类超微粒α-FeOOH粒子,其粒度分别为0.18、0.28、0.39μm,分布均匀,无枝叉。     

Polylactic acid (PLA) root replica in ridge maintenance after loss of a vertically fractured incisor

Abstract A periodontally affected tooth was prepared for a special treatment: Calcium hydroxide was introduced into the apical half of the root canal whereas its cervical part was filled with glass ionomer cement. The tooth was shortened subgingivally. After 6 weeks of epithelization over the residual root a palatal full-thickness flap was mobilized. The root was carefully extracted and chairside copy-milled from the biodegradable polylactic acid (PLA) material. The PLA-replica was implanted immediately into the socket and the flap was sutured. Aim of the treatment was to prevent the ridge collapse of the extraction area. Ridge height could be preserved during the 21 months of observation. With time the radiographic density of the cancellous bone increased in the implanted area, indicating that a PLA-replica is replaced by host's bone tissue.     

医用低值材料采供管理的探讨

医疗消耗材料是医疗工作开展的基础，本文从医用低值消耗材料的计划制定、材料采购、库房库存结构、材料供应、成本核算等多方面探讨了如何对医疗消耗材料进行科学管理，这对医院的医疗发展和管理建设有着重要意义。