Prostatic Artery Embolization—Anatomic Predictors of Technical Outcomes

PurposeTo determine if cone-beam CT and digital subtraction angiography analysis of pelvic arterial anatomy has predictive value for radiation exposure and technical success of prostatic artery embolization (PAE).Materials and MethodsThis prospective, nonrandomized, single-center study included 104 consecutive patients with lower urinary tract symptoms secondary to benign prostatic hyperplasia. Cone-beam CT was performed in 160/208 (76.9%) hemipelves to determine prostatic artery (PA) origin. Classification of pelvic arterial tortuosity was possible in 73/104 (70.2%) patients. Learning curves of 2 interventionalists who performed 86.5% of PAEs were analyzed.ResultsTortuosity of pelvic arteries was classified as mild in 25 (34.2%) patients median age 64 years, moderate in 40 (54.8%) patients median age 69 years, and severe in 8 (11.0%) patients median age 70 years (mild vs moderate, P = .002; mild vs severe, P = .019); median fluoroscopy times were 24, 36, and 46 minutes (P = .008, P = .023); median contrast volumes were 105, 122.5, and 142 mL (P = .029, P = .064); and bilateral PAE rates were 84.0%, 77.5%, and 62.5% (P = .437), respectively. PA origin from superior vesical artery was most frequent (27.5%) and showed higher dose area product (median 402.4 vs 218 Gy ∙ cm², P = .033) and fluoroscopy time (median 42.5 vs 27 min, P = .01) compared with PA origin from obturator artery, which was least frequent. Interventionalist experience revealed significant impact on procedure times (median 159 vs 130 min, P = .006).ConclusionsTortuosity of pelvic arteries was more frequent in older patients and predicted worse technical outcomes of PAE. PA origin from obturator artery was associated with lower dose area product and fluoroscopy time, especially compared with PA origin from superior vesical artery. Interventionalist experience showed significant influence on technical outcome.     

Morphological imaging and CT histogram analysis to differentiate pancreatic neuroendocrine tumor grade 3 from neuroendocrine carcinoma

PurposeTo compare morphological imaging features and CT texture histogram parameters between grade 3 pancreatic neuroendocrine tumors (G3-NET) and neuroendocrine carcinomas (NEC).Materials and methodsPatients with pathologically proven G3-NET and NEC, according to the 2017 World Health Organization classification who had CT and MRI examinations between 2006-2017 were retrospectively included. CT and MRI examinations were reviewed by two radiologists in consensus and analyzed with respect to tumor size, enhancement patterns, hemorrhagic content, liver metastases and lymphadenopathies. Texture histogram analysis of tumors was performed on arterial and portal phase CT images. images. Morphological imaging features and CT texture histogram parameters of G3-NETs and NECs were compared.ResultsThirty-seven patients (21 men, 16 women; mean age, 56 ± 13 [SD] years [range: 28-82 years]) with 37 tumors (mean diameter, 60 ± 46 [SD] mm) were included (CT available for all, MRI for 16/37, 43%). Twenty-three patients (23/37; 62%) had NEC and 14 patients (14/37; 38%) had G3-NET. NECs were larger than G3-NETs (mean, 70 ± 51 [SD] mm [range: 18 - 196 mm] vs. 42 ± 24 [SD] mm [range: 8 - 94 mm], respectively; P = 0.039), with more tumor necrosis (75% vs. 33%, respectively; P = 0.030) and lower attenuation on precontrast (30 ± 4 [SD] HU [range: 25-39 HU] vs. 37 ± 6 [SD] [range: 25-45 HU], respectively; P = 0.002) and on portal venous phase CT images (75 ± 18 [SD] HU [range: 43 - 108 HU] vs. 92 ± 19 [SD] HU [range: 46 - 117 HU], respectively; P = 0.014). Hemorrhagic content on MRI was only observed in NEC (P = 0.007). The mean ADC value was lower in NEC ([1.1 ± 0.1 (SD)] × 10⁻³ mm²/s [range: (0.91 - 1.3) × 10⁻³ mm²/s] vs. [1.4 ± 0.2 (SD)] × 10⁻³ mm²/s [range: (1.1 - 1.6) × 10⁻³ mm²/s]; P = 0.005). CT histogram analysis showed that NEC were more heterogeneous on portal venous phase images (Entropy-0: 4.7 ± 0.2 [SD] [range: 4.2-5.1] vs. 4.5 ± 0.4 [SD] [range: 3.7-4.9]; P = 0.023).ConclusionPancreatic NECs are larger, more frequently hypoattenuating and more heterogeneous with hemorrhagic content than G3-NET on CT and MRI.     

Differentiating autoimmune pancreatitis from pancreatic ductal adenocarcinoma with CT radiomics features

PurposeThe purpose of this study was to determine whether computed tomography (CT)-based machine learning of radiomics features could help distinguish autoimmune pancreatitis (AIP) from pancreatic ductal adenocarcinoma (PDAC).Materials and MethodsEighty-nine patients with AIP (65 men, 24 women; mean age, 59.7 ± 13.9 [SD] years; range: 21–83 years) and 93 patients with PDAC (68 men, 25 women; mean age, 60.1 ± 12.3 [SD] years; range: 36–86 years) were retrospectively included. All patients had dedicated dual-phase pancreatic protocol CT between 2004 and 2018. Thin-slice images (0.75/0.5 mm thickness/increment) were compared with thick-slices images (3 or 5 mm thickness/increment). Pancreatic regions involved by PDAC or AIP (areas of enlargement, altered enhancement, effacement of pancreatic duct) as well as uninvolved parenchyma were segmented as three-dimensional volumes. Four hundred and thirty-one radiomics features were extracted and a random forest was used to distinguish AIP from PDAC. CT data of 60 AIP and 60 PDAC patients were used for training and those of 29 AIP and 33 PDAC independent patients were used for testing.ResultsThe pancreas was diffusely involved in 37 (37/89; 41.6%) patients with AIP and not diffusely in 52 (52/89; 58.4%) patients. Using machine learning, 95.2% (59/62; 95% confidence interval [CI]: 89.8–100%), 83.9% (52:67; 95% CI: 74.7–93.0%) and 77.4% (48/62; 95% CI: 67.0–87.8%) of the 62 test patients were correctly classified as either having PDAC or AIP with thin-slice venous phase, thin-slice arterial phase, and thick-slice venous phase CT, respectively. Three of the 29 patients with AIP (3/29; 10.3%) were incorrectly classified as having PDAC but all 33 patients with PDAC (33/33; 100%) were correctly classified with thin-slice venous phase with 89.7% sensitivity (26/29; 95% CI: 78.6–100%) and 100% specificity (33/33; 95% CI: 93–100%) for the diagnosis of AIP, 95.2% accuracy (59/62; 95% CI: 89.8–100%) and area under the curve of 0.975 (95% CI: 0.936–1.0).ConclusionsRadiomic features help differentiate AIP from PDAC with an overall accuracy of 95.2%.     

Pediatric cardiac computed tomography angiography: Expert consensus from the Filiale de Cardiologie Pédiatrique et Congénitale (FCPC) and the Société Française d’Imagerie Cardiaque et Vasculaire diagnostique et interventionnelle (SFICV)

This article was designed to provide a pediatric cardiac computed tomography angiography (CCTA) expert panel consensus based on opinions of experts of the Société Française d’Imagerie Cardiaque et Vasculaire diagnostique et interventionnelle (SFICV) and of the Filiale de Cardiologie Pédiatrique Congénitale (FCPC). This expert panel consensus includes recommendations for indications, patient preparation, CTA radiation dose reduction techniques, and post-processing techniques. The consensus was based on data from available literature (original papers, reviews and guidelines) and on opinions of a group of specialists with extensive experience in the use of CT imaging in congenital heart disease. In order to reach high potential and avoid pitfalls, CCTA in children with congenital heart disease requires training and experience. Moreover, pediatric cardiac CCTA protocols should be standardized to acquire optimal images in this population with the lowest radiation dose possible to prevent unnecessary radiation exposure. We also provided a suggested structured report and a list of acquisition protocols and technical parameters in relation to specific vendors.     

Enhancing Patients' Wayfinding and Visitation Experience Improves Quality of Care

PurposeTo understand the impact of wayfinding challenges on patient hospital visitation experience, organizational costs, and emerging technology trends that may alleviate wayfinding challenges.DesignA review of literature on the relationship of wayfinding to patient's hospital visitation experience.MethodsA literature search identifying issues associated with wayfinding challenges in complex health care facilities was conducted. Case examples are provided to illustrate that the removal of barriers can improve the wayfinding experience. This review also informs technology trends that may effectively facilitate wayfinding in complex health care facilities.FindingsLarge hospital complexes exhibit many characteristics comparable to the physical features of a city environment. These complexities present challenges to patients to navigate to their destinations. An effective wayfinding system is a collection of tools that combines permanent signage, printed information, landmarks, architectural features and design elements, and human interactions. Navigational technology modeling holds the promise to aid patients and individuals with visual and cognitive challenges to find their way to their desired destinations effectively and efficiently, and improves their quality of life.ConclusionsImproved patient travel time correlates to reduce idled nursing time, with cost savings accrued to organization. Research shows that wayfinding mobile applications hold the promise of improving patients' hospital visitation experience.     

Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

Three‐dimensional (3D) printing technology, virtual reality, and augmented reality technology have been used to help surgeons to complete complex total hip arthroplasty, while their respective shortcomings limit their further application. With the development of technology, mixed reality (MR) technology has been applied to improve the success rate of complicated hip arthroplasty because of its unique advantages. We presented a case of a 59‐year‐old man with an intertrochanteric fracture in the left femur, who had received a prior left hip fusion. After admission to our hospital, a left total hip arthroplasty was performed on the patient using a combination of MR technology and 3D printing technology. Before surgery, 3D reconstruction of a certain bony landmark exposed in the surgical area was first performed. Then a veneer part was designed according to the bony landmark and connected to a reference registration landmark outside the body through a connecting rod. After that, the series of parts were made into a holistic reference registration instrument using 3D printing technology, and the patient's data for bone and surrounding tissue, along with digital 3D information of the reference registration instrument, were imported into the head‐mounted display (HMD). During the operation, the disinfected reference registration instrument was installed on the selected bony landmark, and then the automatic real‐time registration was realized by HMD through recognizing the registration landmark on the reference registration instrument, whereby the patient's virtual bone and other anatomical structures were quickly and accurately superimposed on the real body of the patient. To the best of our knowledge, this is the first report to use MR combined with 3D printing technology in total hip arthroplasty.     

Perfusion pressure flow study in the upper urinary tract

Hydronephrosis with an undetermined pathology is a common condition detected in imaging studies. In urological clinical practice, it is a persistent dilemma to predict whether this condition will progress to result in the deterioration of renal function. Perfusion pressure flow study of the upper urinary tract, known as the Whitaker test, provides an alternative diagnostic tool for solving this condition. Perfusion pressure flow study has been criticized for its invasiveness, nonphysiological approach, and inconsistency in predicting outcomes. However, it continues to be used to evaluate difficult or equivocal cases and to provide an objective assessment of the upper urinary tract.     

Modern theatre design and usage: do joint replacements need laminar flow?

Since the introduction of laminar flow to theatre systems by Charnley, it has become a necessity in arthroplasty surgery. His initial work in the 1960s and 70s created improvements in terms of reducing overall rates of periprosthetic joint replacement, but it has been hard to ascertain if this stems from the laminar flow itself or improvements in asepsis and the utilization of perioperative antibiotics. The aim of this paper is therefore to establish if laminar flow is still a necessary addition to modern theatre design, particularly in joint replacement surgery, irrespective of other surgical factors. A wide variety of studies were utilized to form an objective analysis of whether laminar flow is essential to asepsis in theatre design. It explores a number of smaller earlier studies and ends with two large trials which provide evidence that laminar flow may in fact have a deleterious effect on the potential for peri-prosthetic joint infection (PJI). The article discusses potential reasons for these findings and seeks to explain them in context of overall asepsis during joint replacement surgery.