膝关节镜手术并发症临床分析

1997年1月～2005年12月，我院对324例膝关节疾病患者行关节镜手术治疗，其中23例出现各种并发症。笔者总结分析其产生原因并提出防治措施。     

手法治疗肘关节错缝86例

2000年1月-2005年10月共治疗肘关节错缝86例,临床效果满意,现报告如下。1临床资料86例中男61例,女25例;年龄13~46岁。受伤机制:均为跌倒时手掌着地,肘关节过伸导致。摄X线片未见骨折及关节异常。肘关节伸屈活动障碍,伸20°~40°,屈90°~110°,屈伸平均(70·57°±3·01°)的活动范围。肘关节轻度肿胀,以内后方为甚,压痛点为尺骨半月切迹的内侧,强作旋后活动时会引起剧烈疼痛,肘三角正常。受伤至就诊时间1~3 d,平均1·5 d。2治疗方法2·1复位左肘错缝者坐于靠背椅上,助手立于患者侧背后方,紧握患者上臂,术者于患者前侧,左手握患者腕部,右手…     

Trapeziometacarpal joint osteoarthritis: a retrospective study comparing arthrodesis to tendon interposition arthroplasty

Abstract Surgical management of trapeziometacarpal joint osteoarthritis (OA) is still controversial. The aim of this study was to evaluate and compare results of trapeziometacarpal arthrodesis and of tendon interposition arthroplasty. One hundred twenty-six patients suffering from trapeziometacarpal OA underwent surgery between 1996 and 2001. Of these patients, 62 (78 thumbs) treated with joint arthrodesis and 33 (41 thumbs) treated with tendon interposition arthroplasty with abductor pollicis longus (APL) have been evaluated at follow-up and therefore entered this study. Mean age was 53 years, while the mean follow-up was 36 months. Overall results were satisfactory in 84 patients with good pain improvement. Patients treated with arthrodesis showed better functional ability in bi-digital pinch and grip strength. First finger opposition motion, however, was better conserved in patients treated with interposition arthroplasty. Fusions had an 11.5% complication rate (9 thumbs) with nonunions, whereas 14.8% (6 thumbs) of patients treated with interposition arthroplasty developed 1 first metacarpal base collapse, resulting in 1 first ray length reduction. Despite complications, however, patients did not report unsatisfactory results and generally experienced marked pain reduction. This study shows that arthrodesis can be considered the treatment of choice in patients suffering from trapeziometacarpal OA at Eaton stage III or less, whatever the age and when a good pinch strength is needed.     

Surgical Biomechanics of the Patellofemoral Joint

This review presents objective data, as far as possible, about the current understanding of the biomechanics of the patellofemoral joint as it pertains to the management of patellofemoral problems. When faced with a patellofemoral malfunction, it is important to check all the soft-tissue and articular geometry factors relating to the patella locally and not to neglect the overall lower limb alignment and function. It is important to remember that small alterations in alignment can result in significant alterations in patellofemoral joint stresses and that changes in the mechanics of the patellofemoral joint can also result in changes in the tibiofemoral compartments. Surgical intervention for patellofemoral problems needs to be planned carefully and take into account an individual’s anatomy.     

Arthroscopic Coracoclavicular Ligament Reconstruction Using Biologic and Suture Fixation

Presented in this report is a modified arthroscopic approach to acromioclavicular joint reconstruction via suture and allograft fixation. An arthroscopic approach is used to expose the base of the coracoid by use of electrocautery. After an open distal clavicle excision is performed, clavicular and coracoid tunnels are created under arthroscopic visualization as previously described by Wolf and Pennington. The myotendinous end of a semitendinosus allograft is sutured to a Spider plate (Kinetikos Medical, San Diego, CA). The tendinous end of the graft is prepared with a running baseball stitch. A Nitinol wire with a loop end (Arthrex, Naples, FL) is used to pass 2 free FiberTape sutures (Arthrex) and the leading sutures from the tendinous end of the graft through the clavicular and coracoid tunnels, exiting out the anterior portal. One of the FiberTape sutures is retrieved with a grasper and passed over the anterior aspect of the distal clavicle. The second FiberTape suture and the allograft are passed over the distal end of the resected clavicle. While the acromioclavicular joint is held reduced, the FiberTape sutures are tied to the plate and the allograft is tensioned medially until the plate is embedded against the superior surface of the clavicle. The tendinous end of the graft is secured to the superior surface of the clavicle with a Bio-tenodesis screw (Arthrex) medial to the clavicular tunnel.     

Acromioclavicular Joint Reconstruction Using Peroneus Brevis Tendon Allograft

We describe the use of a double-strand peroneus brevis allograft to reconstruct the coracoclavicular and acromioclavicular (AC) joint ligaments. Through sharp dissection, the distal clavicle, the AC joint, and the torn superior AC and coracoacromial ligaments are identified. The coracoid process and injured coracoclavicular ligaments are identified with blunt dissection. A 1-cm segment of the lateral clavicle is resected. Vertical and connecting horizontal tunnels are created (4.5 mm) in the lateral clavicle and in the medial acromion process. The 5.5- to 6.0-mm-diameter allograft is looped around the coracoid process, and both strands are passed through the vertical clavicle tunnel with a nitinol wire loop. One strand passes through the vertical clavicle tunnel, and the other strand passes through the horizontal tunnel, exiting through the lateral end. The allograft strand passed through the vertical clavicle tunnel is then passed inferiorly through the superior vertical acromion tunnel, and the strand passed completely through the horizontal clavicle tunnel is passed laterally through the medial horizontal acromion tunnel. After both strands exit inferiorly through the vertical acromion tunnel, they are tensioned and sutured with AC joint reduction. Soft tissue closure uses No. 0 and No. 2-0 absorbable sutures with No. 3-0 nylon sutures at the skin.     

Minimally Invasive Coracoclavicular Ligament Augmentation With a Flip Button/Polydioxanone Repair for Treatment of Total Acromioclavicular Joint Dislocation

Treatment of complete acromioclavicular joint disruption remains controversial and ranges from rehabilitation to extensive surgical reconstruction. However, high-grade injuries (type IV, V, and VI) are typically treated surgically. Most reconstruction techniques addressing these injuries selectively focus on coracoclavicular ligament augmentation because it has been shown to be the primary stabilizer of the acromioclavicular joint. The conventional coracoclavicular polydioxanone (PDS) loop, which is widely performed, has been detected to have some pivotal disadvantages, including anterior subluxation of the clavicle, extensive preparation of the coracoid, and bony avulsion of the clavicle as a result of rotational clavicle movement. Therefore we present an augmentation technique that reduces these complications by replicating the orientation of the native coracoclavicular ligament complex and providing a minimally invasive subcoracoid and clavicular fixation of a double PDS loop by use of 2 flip buttons, typically used for extracortical anterior cruciate ligament graft fixation. The key step of the procedure includes the anatomic, secure, and stable placement of the double PDS cerclage under the coracoid base transferring a flip button through a coracoid bone tunnel. Our clinical experience shows that the presented technique is easy to perform and has a comparable invasiveness to recently presented arthroscopic techniques.     

微创与切开复位接骨板内固定治疗膝关节内骨折的比较

[目的]比较研究微创接骨板内固定和切开复位接骨板内固定对膝关节内骨折的治疗效果,探讨生物学内固定在膝关节内骨折中的使用价值.[方法]总结近年来根据生物学固定原则,以微创接骨板固定术(MIPO)治疗的膝关节内骨折共21例.以创伤类型及年龄等因素进行配对,选择切开复位内固定(ORIF)治疗的病例资料比较手术及术后恢复情况.采用HSS评分评价结果.[结果]MIPO组随访10～16个月(平均14.2个月),有2例进行骨移植术,平均手术时间60.0 min,术中失血量45.0 ml,平均骨折愈合时间10.0周,3例有5°以上膝内、外翻畸形,HSS功能评分平均86.67分;ORIF组经过12～48个月(平均21.2个月)随访,有18例进行骨移植术,平均手术时间79.52 min,平均术中失血量117.1 ml,平均骨折愈合时间12.24周,2例发生5°以上膝关节内、外翻畸形,HSS功能评分平均82.14分.两组均获得骨愈合,没有感染和内固定断裂等并发症发生.比较发现两组患者在手术时间、术中失血量、骨折愈合时间和功能恢复方面差异有统计学意义.[结论]对于合适的膝关节内骨折病例以微创接骨板内固定治疗可以降低植骨需求和术中失血,在手术过程和术后恢复方面有明显优势.