Intrahepatic Glissonian approach and outflow vascular occlusion during partial hepatectomy

Under ultrasound guidance, a blunt suture needle was inserted around the Glissonian pedicle and then sutured. This technique significantly reduced the blood loss and facilitated the procedure of partial hepatectomy. We applied this technique in 182 patients who needed partial hepatectomy. We concluded that this method is simple and easy to occlude the vascular inflow and outflow, and allows an accurate delineation of the anatomic zone and therefore, simplifies the procedure of partial hepatectomy.     

Retrograde aortic valve crossing of the corevalve prosthesis using the buddy balloon technique

In rare cases, retrograde aortic valve crossing during transcatheter aortic valve implantation may be challenging despite improvements in delivery catheter profile, size, and steerability compared with the first generation devices. Herein, we report a case of challenging transfemoral Medtronic CoreValve placement that was possible, thanks to the buddy balloon technique, using a peripheral 6‐F compatible balloon. © 2013 Wiley Periodicals, Inc.     

Characterization of W–Cr Metal Matrix Composite Coatings Reinforced with WC Particles Produced on Low-Carbon Steel Using Laser Processing of Precoat

The paper presents the study results of laser processing of precoat applied on C30 steel. The precoat consisted of powder mixtures with a binder in the form of water glass. Tungsten powder, chromium, and tungsten carbide (WC) were used to produce the precoat. The laser processing was carried out using a Yb:YAG disc laser with a rated power of 1 kW. Constant producing parameters (power of laser beam, 600 W; laser beam scanning rate, 400 mm/min) were applied. Chemical composition of the precoat was a variable parameter in coating production. A mixture consisting of 50% W and 50% Cr as a metal matrix was prepared. Subsequently, WC particles in weight ratios of 25%, 50%, and 75% were added to matrix. As a result, W–Cr metal matrix composite coatings reinforced with WC particles were formed. This study focused on investigation of microstructure, microhardness, phase, and chemical composition as well as corrosion and wear resistance, of the newly formed W–Cr/WC coatings. An instrumented nanoindentation test was also used in this study. As a result of laser beam action, the newly formed coatings had an interesting microstructure and good properties which were improved in comparison to substrate material. It is anticipated that the resulting coatings, depending on the treatment parameters (e.g., W–Cr/WC powder mixture) used, can be successfully applied to metal forming or foundry tools.     

Clinical Evaluation of Time Efficiency and Fit Accuracy of Lithium Disilicate Single Crowns between Conventional and Digital Impression

The purpose of this study was to demonstrate the time-efficiency and the clinical effectiveness of chairside-fabricated lithium disilicate single crowns by digital impressions compared to the conventional method. Thirteen patients requiring a single crown on the maxillary or mandibular premolar or first molar were assigned as study subjects. The impressions were obtained using the conventional method and two digital methods with intraoral scanners: AEGIS.PO (Digital Dentistry Solution, Seoul, Korea) and CEREC Omnicam (Sirona, Bensheim, Germany). Two types of lithium disilicate single crowns were obtained; a reference crown (by conventional workflow) and a chairside crown (by digital workflow). The total time taken for fabricating the chairside crown was recorded. The replica technique was performed to compare the marginal and internal fit of the two types of crowns. In addition, accuracy of the intraoral scanners was evaluated by the best-fit alignment method. The difference between the groups was analyzed using the two-tailed paired t-test or one-way ANOVA, followed by the Student–Newman–Keuls test for multiple comparisons. Statistical significance was accepted at p < 0.05 for all statistical tests. The time required to obtain the impressions by the AEGIS (7:16 ± 1:50 min:s) and CEREC (7:29 ± 2:03 min:s) intraoral scans was significantly lower than the conventional method (12:41 ± 1:16 min:s; p < 0.001). There was no significant difference between the intraoral scanners. The total working time to fabricate the chairside crown averaged 30:58 ± 4:40 min:s. The average marginal gap was not significantly different between the reference (107.86 ± 42.45 µm) and chairside (115.52 ± 38.22 µm) crowns (p > 0.05), based on results of replica measurement. The average internal gaps were not significantly different. The average value of the root mean square between the AEGIS (31.7 ± 12.3 µm) and CEREC (32.4 ± 9.7 µm) scans was not significantly different (p > 0.05). Intraoral scans required a significantly shorter impression time than the conventional method, and it was possible to fabricate a lithium disilicate crown in a single visit. There were no statistically significant differences in the fit of the restorations and accuracy of the intraoral scanners compared to the conventional workflow.     

Computer-navigated minimally invasive total knee arthroplasty for patients with retained implants in the femur

Total knee arthroplasty (TKA) in patients with knee arthritis and retained implants in the ipsilateral femur is a challenge for knee surgeons. Use of a conventional intramedullary femoral cutting guide is not practical because of the obstruction of the medullary canal by implants. Previous studies have shown that computer-assisted surgery (CAS) can help restore alignment in conventional TKA for patients with knee arthritis with retained femoral implants or extra-articular deformity, without the need for implant removal or osteotomy. However, little has been published regarding outcomes with the use of navigation in minimally invasive surgery (MIS)-TKA for patients with this complex knee arthritis. MIS has been proven to provide less postoperative pain and faster recovery than conventional TKA, but MIS-TKA in patients with retained femoral implants poses a greater risk in limb malalignment. The purpose of this study is to report the outcome of CAS-MIS-TKA in patients with knee arthritis and retained femoral implants. Between April 2006 and March 2008, eight patients with knee arthritis and retained femoral implants who underwent the CAS-MIS-TKA were retrospectively reviewed. Three of the eight patients had extra-articular deformity, including two femur bones and one tibia bone, in the preoperative examination. The anteroposterior, lateral, and long-leg weight-bearing radiographs carried out at 3-month follow-up was used to determine the mechanical axis of lower limb and the position of components. The mean preoperative femorotibial angle in patients without extra-articular deformity was 3.8° of varus and was corrected to 4.6° of valgus. With the use of navigation in MIS-TKA, the two patients in this study with extra-articular femoral deformity also obtained an ideal postoperative mechanical axis within 2° of normal alignment. Overall, there was a good restoration of postoperative mechanical alignment in all cases, with a mean angle of 0.4° of varus. No limb malalignment or component malposition was found. In clinical assessments, there were also significant improvements in knee specific scores, functional scores, and motion arc. The results of this study suggest that navigation can help achieve accurate alignment and proper prosthesis positioning in MIS-TKA for patients with retained femoral implants and for whom intramedullary rod guidance is impractical.     

Transcervical minimally invasive esophagectomy: hemodynamic study on an animal model

BackgroundTranscervical esophagectomy is a less invasive procedure performed within mediastinum. However, the mediastinum offers limited surgical space and the surgery via this route differs from conventional minimally invasive esophagectomy. Therefore, the physiological study of this surgical approach on an animal model would be necessary before the procedure gained more popularity.MethodsWe conducted transcervical minimally invasive esophagectomy on animal model (swine) under CO₂ pneumomediastinum. The hemodynamic parameters were monitored using float catheter cannulated via right jugular vein. At different anatomical level (the upper, middle, and lower thoracic part of the animal esophagus), increased artificial pneumomediastinal pressures (0, 4, 8, 12, and 16 mmHg) were consecutively allocated to record the intra-operative changes of blood pressure, cardiac output (CO), central venous pressure (CVP), pulmonary artery pressure (PAP) and extravascular lung water (EVLW). Meanwhile, the surgical field under different pneumomediastinum pressure was recorded and balanced with animals’ hemodynamic changes to determine the optimal pressure for transcervical minimally invasive esophagectomy.ResultsThe animal procedures were accomplished without conversions. During the upper thoracic stage, increased CO₂ pressures did not lead to significant changes in hemodynamic parameters including the blood pressure, CO, CVP, PAP or the level of EVLW. During the middle thoracic stage, pneumomediastinum under 4–12 mmHg did not lead to significant changes in hemodynamic parameters. However, pneumomediastinum at 16 mmHg resulted in lower CO (P=0.038) when compared to 0–12 mmHg. During lower thoracic stage, as the pneumomediastinum pressures increased from 0 to 16 mmHg, significant decrease in CO (P=0.022), and increase in CVP (P=0.036) was recorded. In compared to 4 mmHg pneumomediastinum, the surgical field under 8–16 mmHg artificial CO₂ pneumomediastinum was suitable for mediastinal manipulation.ConclusionsDuring transcervical minimally invasive esophagectomy on animal model, the mobilization of swine thoracic esophagus with optimal pneumomediastinum pressure 8–12 mmHg is safe and effective based on hemodynamic analysis.