中日友好医院分型股骨头坏死腓骨植入治疗的三维有限元分析

文题释义：股骨头坏死中日友好医院分型的有限元分析：根据李子荣等提出的中日友好医院分型，建立股骨头坏死三维模型，分为 M型(内侧型)、C型(中央型)和 L型(外侧型)，其中 L型包括L1型(次外侧型)、L2型(极外侧型)和 L3型(全头型)。通过对建立的模型进行有限元分析，为该分型的保髋治疗提供了一定力学依据，显示外侧柱的存留是精准预防塌陷的重要因素，为进一步实现个体化治疗提供力学基础。 腓骨支撑坏死股骨头保髋手术：是对于早中期股骨头坏死需要保留股骨头患者进行的一种手术方式。首先需对股骨头进行髓芯减压，清除一定坏死骨，空腔填塞松质骨(髂骨为主)，打压结实后植入腓骨(异体或自体)支撑，给坏死区的提供力学支撑及生物学修复，预防股骨头进一步坏死及塌陷。 背景：研究报道股骨头坏死的保髋疗效与外侧柱存留密切相关，中日友好医院分型是根据三柱结构确立的，对股骨头塌陷的预测准确性高。 目的：建立股骨头坏死中日友好医院分型各分型仿真的三维有限元模型，通过有限元分析各分型腓骨植入的力学变化，探讨外侧柱存留对保髋疗效的意义，为该分型的塌陷精准预测提供基础。 方法：建立正常股骨头、中日友好医院分型(M型、C型、L1型、L2型、L3型)股骨头坏死及其腓骨植入3组11种三维有限元模型，运用ANSYS软件进行有限元分析计算，观察各组模型的最大应力值、最大位移值及股骨头内部载荷传递模式。 结果与结论：①坏死组位移最大，应变最大，且因坏死分型不同而位移不同，位移变化如下：M型相似文献   

高渗盐水和甘露醇在动脉瘤性蛛网膜下腔出血患者降低颅内压中的应用

目的比较3%高渗盐水和20%甘露醇治疗重症动脉瘤性蛛网膜下腔出血所致颅内压增高的疗效.方法25例动脉瘤性蛛网膜下腔出血患者出现颅内压增高事件时, 随机交替接受等渗透剂量的160 mL 3%高渗盐水与150 mL 20%甘露醇进行降低颅内压治疗, 连续监测患者颅内压、平均动脉压、脑灌注压及中心静脉压.记录有效降低颅内压持续时间、颅内压最大降幅及其时间, 用药前及用药后1 h、3 h血钠水平及血浆渗透压.结果3%高渗盐水和20%甘露醇均可降低颅内压(均 P < 0.01), 两者的降低颅内压作用持续时间及颅内压降幅差异均无统计学意义(均 P >0.05).患者脑灌注压较用药前均上升(均 P < 0.01), 平均动脉压先上升后下降, 但差异无统计学意义( P >0.05).患者中心静脉压稍有波动, 但差异均无统计学意义(均 P >0.05).20%甘露醇治疗后患者血钠下降, 3%高渗盐水治疗后患者血钠值上升, 变化均有统计学意义(均 P < 0.05).20%甘露醇及3%高渗盐水治疗后患者血浆渗透压均先上升后下降, 变化均有统计学意义(均 P < 0.01). 结论3%高渗盐水可作为治疗动脉瘤性蛛网膜下腔出血所致颅内压增高患者的一线治疗药物.     

《艾滋病诊疗指南第三版(2015版)》更新解读

2015年中华医学会感染病学分会艾滋病学组发布了第三版《艾滋病诊疗指南》。新版指南强调抗病毒治疗时点前移:一旦成人确诊感染人类免疫缺陷病毒(HIV), 若无禁忌宜尽早启动抗HIV治疗。对于合并机会性感染的HIV感染者, 在感染控制、病情稳定后也应及早开始抗病毒治疗。尤其强调HIV合并结核患者在CD4阳性淋巴细胞数少于200/μL的情况下, 建议抗结核两周内即开始抗病毒治疗。在抗HIV治疗用药中, 淘汰了一些毒副作用大、依从性较差的药物, 如司他夫定、去羟肌苷、茚地那韦等, 优选抗病毒效力强、服药方便的组合, 如拉米夫定、替诺福韦、依非韦伦组合。对于HIV感染的婴幼儿, 亦主张及早抗HIV治疗。对于五岁以内的幼儿, 主张确诊后即启动抗病毒治疗。对于HIV感染的孕产妇, 建议尽快予以全程、联合抗HIV治疗, 寓防于治。     

Customized three-dimensionally printed mandibular external fixator

The advent of customized three-dimensional (3D) printing allows the affordable manufacturing of sophisticated medical devices, thereby providing swift and simple solutions to specific needs in modern healthcare. Meanwhile, certain devices such as industrial mandibular external fixators (EFs) have become less and less available from medical device companies because of decreased indications. What is more, their handling is often complex. The authors report, step by step, the original design and uneventful clinical use of a 3D-printed, customized mandibular EF. This device was designed together with a positioning and drilling guide for the fixation of a septic mandibular pseudarthrosis. It provided an adequate and satisfactory balance between lightness and rigidity. A simple, accurate and safe placement of the EF was achieved thanks to the skin-supported positioner and drilling guide, thereby making the procedure minimally invasive and time-efficient. To our knowledge, this is the first reported clinical use of a 3D-printed, customized mandibular EF to date. Because such 3D technology is becoming increasingly available to a large number of surgeons, the authors believe that the present innovation could become an alternative to reusable standard EFs.     

艾滋病儿童神经认知障碍相关因素研究进展

目的 总结艾滋病儿童神经认知障碍影响因素。方法 在PubMed、Web of Science、CNKI、万方和维普数据库，以“艾滋病”、“儿童”、“神经认知障碍”、“脑病”、“影响因素”为主题词或关键词，同时辅以手工检索和文献追溯检索近年相关文献。着重整理影响艾滋病儿童神经认知障碍的因素。对资料进行汇总并撰写综述。结果 检索并阅读相关文献100余篇。艾滋病病毒相关因素（HIV损害中枢神经系统、HIV逃逸及病毒储存库、HIV亚型）、宿主因素（启动抗病毒治疗时机、遗传因素、营养状况及合并其他疾病）、抗病毒治疗药物、社会心理因素等均可影响艾滋病感染儿童神经认知。结论 为了尽可能避免或降低艾滋病儿童神经认知障碍，应当尽早诊断、尽早给予高效的抗逆转录病毒治疗；随访中应重视神经认知发育的观察和筛查，及早识别神经认知障碍，积极寻找多方面的原因并进行有效干预。     

The Health Belief Model in predicting healthcare workers' intention for influenza vaccine uptake in Jordan

BackgroundTheories of health behavior change are being inadequately adopted to understand the reasons behind low influenza vaccination rates among healthcare workers (HCWs). The Theory of Planned Behavior (TPB) is being used to predict intention-behavior relationship while the Health Belief Model (HBM) is being employed to predict actual behavior. The purpose of this study was to test a conceptual model based on the HBM’s constructs to predict Jordanian HCWs’ intentions for influenza vaccine uptake as an alternative to the TPB.MethodA cross-sectional questionnaire-based study was conducted in 2016 in a tertiary teaching hospital in Amman-Jordan including a convenience sample of 477 HCWs with direct patient contact. The study instrument was tested for validity and reliability. A conceptual regression model was proposed incorporating the constructs of the primary HBM with some modifications in the threat construct as well as an additional variable about explicit past vaccination behavior (in the past year and/or any previous history of influenza vaccine uptake).ResultsAlmost all the constructs of the HBM demonstrated significant differences between participants intending and those who did not intend to vaccinate against influenza. After adjusting for the confounding variables in the final conceptual regression model, past vaccination behavior (OR= 4.50, 95%Confidence Interval 3.38–6.00, P< 0.0005) and the perceived benefit scale (OR= 1.19, 95% Confidence Interval 1.11–1.28, P< 0.0005) were the only significant predictors of intentions to vaccinate against influenza in the next season.ConclusionTaking into consideration the altruistic beliefs of HCWs and their explicit past vaccination history augments the utility of the original HBM tool in predicting HCWs’ intentions to vaccinate against influenza in a way that is consistent with the predictive ability of the Theory of Planned Behavior.     

Standard versus customised locking plates for fixation of schatzker ii tibial plateau fractures

Aim3D-printed implants could improve the capture of fracture fragments for improved stability of tibial plateau fracture fixation. The aim of this study was to compare the biomechanical strength of fixation constructs using standard and customised 3D-printed proximal tibial locking plates for fixation of tibial plateau fractures.MethodsThis is a biomechanical study utilising six pairs of cadaveric tibiae. Fractures were created in an identical fashion using an osteotome and mallet, and fixed using either a standard, commercially-available proximal tibia locking plate or a customised 3D-printed plate. Design and production of the customised plates followed a “3D printing at point-of-care” model. Customised stainless steel 316 L plates were produced within a local additive manufacturing laboratory based upon pre-operative CT scans. Determination of implant choice within each cadaver pair was performed via simple randomisation. Following fracture fixation, the tibiae were skeletalised and biomechanically tested using a customised loading jig and a size-matched femoral knee prosthesis. The constructs were loaded cyclically from 100 N to approximately three times the cadaveric body-weight at 5 Hz for 10 000 cycles. Every 1000 cycles, the test was paused and the tibia was physically checked for failure. If failure had not occurred by the end of the testing cycle, the construct was loaded to failure and the load at which the construct failed was noted.ResultsFixation constructs using the 3D-printed plates performed comparably to those using the standard plates. There was no significant difference in the degree of fracture fragment displacement in both constructs. Overall longitudinal construct stiffness and load to failure was higher in the 3D-plates group but this did not reach statistical significance.ConclusionProduction of customised plates for proximal tibia fractures at point-of-care is feasible, however fixation constructs with these plates did not provide any biomechanical advantage over standard plates in terms of axial loading stiffness.