交叉韧带重建手术中可吸收挤压螺钉的应用

目的探讨交叉韧带重建术中可吸收挤压螺钉的使用方法和疗效。方法总结53例交叉韧带重建病例使用可吸收挤压螺钉的情况，在术中、术后并发症、术后康复、膝关节功能状况等方面进行回顾性分析。结果三例出现韧带切割现象。两例股骨侧螺钉拧入后导引针无法拔出。一例挤压螺钉断裂。术后Lysholm评分平均92.4±4．1。结论交叉韧带重建术中使用可吸收挤压螺钉固定的方法固定牢固，术后恢复快，利于早期康复。     

Plain radiographic findings in anterior cruciate ligament injury and repair

Although magnetic resonance imaging is the most accurate imaging method of evaluating the anterior cruciate ligament, several plain radiographic signs suggestive of anterior cruciate ligament injury have been described. Plain radiographs also play an important role in evaluating anterior cruciate ligament reconstruction.     

Closing patellar tendon defects after anterior cruciate ligament reconstruction: absence of any benefit

The most common graft in anterior cruciate ligament (ACL) surgery involves using the central one-third of the patellar tendon. Knowledge concerning the postoperative disability after harvesting the patellar tendon is, however, limited. The aim of this study was to evaluate the impact patellar tendon suture and bone grafting of the patellar bone defect might have in terms of functional outcome and patellofemoral pain after harvesting the bone-tendon-bone graft, compared with leaving the harvested site non-sutured and non-grafted. Sixty patients, scheduled for arthroscopically assisted ACL reconstruction, were randomly allocated to two groups. In group I, suture of the patellar tendon and bone grafting of the patellar defect were performed. In group II, the tendon gap and the patellar defect were left open. Preoperatively, there was no significant difference between the groups when comparing objective knee stability, as measured with a KT-1000 laxity meter, Lysholm score, Tegner activity level, IKDC score, or patellofemoral pain score. Both groups had a significantly improved Lysholm score at the 2-year follow-up, without any difference between them. Tegner's activity level was significantly lower at follow-up, compared with the pre-injury level in both groups. The patellofemoral pain score improved significantly after the reconstruction, without any difference between the groups. Ultrasonography did not reveal any difference between the groups in terms of healing of the tendon gap. This study revealed no differences in donor site morbidity, functional outcome, patellofemoral pain score or knee joint stability between the two treatment groups. The conclusion is that suture of the patellar tendon and bone grafting of the patellar defect do not improve the functional results or reduce donor site morbidity after arthroscopically assisted ACL. Received: 17 December 1996 Accepted: 30 July 1997     

Transfer of lumbosacral load to iliac bones and legs Part 1: Biomechanics of self-bracing of the sacroiliac joints and its significance for treatment and exercise

This study deals primarily with the stability of the base of the spine. The sacroiliac joints are vulnerable to shear loading on account of their predominantly flat surfaces. This raises the question of what mechanisms are brought into action to prevent dislocation of the sacroiliac joints when they are loaded by the weight of the upper part of the body and by trunk muscle forces. First a model is introduced to compare load transfer in joints with spherical and with flat joint surfaces. Next we consider a biomechanical model for the equilibrium of the sacrum under load, describing a self-bracing effect that protects the sacroiliac joints against shear according to ‘the sacroiliac joint compression theory’, which has been demonstrated in vitro. The model shows joint stability by the application of bending moments and the configuration of the pelvic arch. The model includes a large number of muscles (e.g. the gluteus maximus and piriformis muscles), ligaments (e.g. the sacrotuberous, sacrospinal, and dorsal and interosseous sacroiliac ligaments) as well as the coarse texture and the ridges and grooves of the joint surfaces.     

骨桥栓桩与界面螺钉固定前交叉韧带重建移植物胫骨端的临床价值对比

对比骨桥栓桩与界面螺钉在膝关节前交叉韧带断裂重建术中的临床价值。方法 回顾性分析2019年7月—2020年12月我院700例在关节镜下行前交叉韧带重建手术的患者,股骨隧道均以横穿钉固定。按移植物胫骨端固定方式分为骨桥栓桩组（380例）及界面螺钉组（320例）。对比两组手术时间、切口长度、住院时间及费用;比较两组术后3个月、12个月胫骨隧道大小、膝关节功能Lyshlom评分及术后12个月关节松弛度。结果 两组患者手术时间、胫骨端切口长度、住院时间比较差异均无统计学意义（P＞0.05）,但骨桥栓桩组手术费用显著低于界面螺钉组（P＜0.05）。术后3个月、12个月两组患者胫骨隧道大小、膝关节功能Lyshlom评分及关节松弛度比较差异均无统计学意义（P＞0.05）,但随着时间的延长,两组患者隧道均有不同程度的扩大（P＜0.05）。结论 对于行关节镜下前交叉韧带重建术的患者,采用骨桥栓桩胫骨端固定方式可取得与界面螺钉固定相当的临床效果,但骨桥栓桩固定更具医疗经济优势,是一种可广泛推广的胫骨端固定方法     

Ligament tissue engineering: an evolutionary materials science approach

The anterior cruciate ligament (ACL) is important for knee stabilization. Unfortunately, it is also the most commonly injured intra-articular ligament. Due to poor vascularization, the ACL has inferior healing capability and is usually replaced after significant damage has occurred. Currently available replacements have a host of limitations, this has prompted the search for tissue-engineered solutions for ACL repair. Presently investigated scaffolds range from twisted fiber architectures composed of silk fibers to complex three-dimensional braided structures composed of poly (l-lactic acid) fibers. The purpose of these tissue-engineered constructs is to apply approaches such as the use of porous scaffolds, use of cells, and the application of growth factors to promote ligament tissue regeneration while providing mechanical properties similar to natural ligament.     

子宫阔韧带内静脉的解剖学研究及其临床意义

子宫底和体上部的静脉汇集于子宫角处浅出,应称子宫上静脉。该静脉续为卵巢静脉。子宫上静脉1条者占30%,2条者占56.7%,3条者占13.3%。子宫上静脉与输卵管峡部中点相对处的口径是3.7±0.2mm,卵巢丛与子宫上静脉汇合后的口径为5.0±0.4mm。输卵管峡部中点与子宫上静脉的间距为6.3±0.6mm。在输卵管系膜中见有输卵管静脉汇入子宫上静脉。本文研究结果认为盆腔静脉淤血症的发生,与结扎手术中损伤子宫上静脉和输卵管静脉有关。     

Three-dimensional finite element analysis of the stress of the patellofemoral joint after medial patellofemoral ligament reconstruction by different femoral reconstruction insertion points北大核心

BACKGROUND: There are many ways to reconstruct the patellofemoral ligament. Among them, the lateral insertion of the femur has a greater influence. At present, there are many ways to select femoral insertion points, but there are no conclusions. OBJECTIVE: Through the analysis of three-dimensional finite element software, the change of femoral reconstruction insertion position of medial patellofemoral ligament under different flexion states can analyze the stress of the patellofemoral joint to select a suitable femoral reconstruction insertion. METHODS: CT data of normal knee joints of adults were obtained to import Mimics, Geomagic and Soildworks software to extract molds and add ligaments. The femoral insertion points of the ligament were the midpoint between the medial epicondyle and the adductor tubercle, the medial epicondyle, the adductor tubercle, the projection point from the top of the femoral intercondylar fossa to the medial condyle and 10 mm below the adductor tubercle. The mold added with ligament was imported into the mechanical software Ansys to analyze the stress of patellofemoral joint after reconstruction of different femoral insertion points using finite element analysis. RESULTS AND CONCLUSION: (1) When the knee flexion was 0° and 30°, the stress of patellofemoral joint at any femoral insertion point of reconstructed medial patellofemoral ligament was greater than that at other angles (60°, 90°, and 120°). No matter which position was used as the femoral insertion point, when the knee joint was flexed more than 30°, there was basically no difference in the contact stress between the patellofemoral joints. (2) At 0° and 30° of knee flexion, the patellofemoral contact pressure was the largest at the point of the adductor tubercle, and the contact force at the midpoint between the medial epicondyle and the adductor tubercle was the smallest. When the knee was flexed 30°, the midpoint between the medial epicondyle and the adductor tubercle, the projection point from the top of the femoral intercondylar fossa to the medial condyle, and 10 mm below the adductor tubercle as the insertion point showed no significant difference in the contact stress. (3) Results indicate that when reconstructing medial patellofemoral ligament, the best choice of femoral lateral insertion point is the midpoint between the medial epicondyle and the adductor tubercle. This point can effectively restore the stability of knee joint and delay the degeneration of joint and cartilage. © 2023, Publishing House of Chinese Journal of Tissue Engineering Research. All rights reserved.     

Transcatheter arterial embolization of abnormal neovessels in a swine model of knee arthritis

BackgroundIn recent years, transcatheter arterial embolization (TAE) using imipenem/cilastatin (IPM/CS) has attracted attention as a treatment for relieving osteoarthritis (OA) pain. However, IPM/CS is not approved by Japanese medical insurance for use as an embolic material. Therefore, it is necessary to develop new embolic materials for TAE to relieve OA pain. The purpose of this study was to develop a swine model of knee arthritis and embolize abnormal neovessels (ANs) using two different embolic materials. We compared the embolic effects and tissue damage in knees.MethodsKnee arthritis was induced by intra-articular injection of papain into 12 knees in six female swine. The swine were divided into two groups of three swine each (six knees per group) for embolization of ANs in the knees with either IPM/CS or soluble gelatin sponge particles (SGSs). Three days after embolization, we compared the embolic effects using angiography and the tissue damage histopathologically.ResultsANs were observed in all 12 knees at 42 days after papain injection. The ANs disappeared and the patent arteries were recanalized 3 days after TAE in all 12 knees. Histopathological evaluation revealed synovitis changes, such as synovial thickening and inflammatory cell infiltration, in all 12 knees. There was no evidence of skin or muscle necrosis in either group. The appearance of ANs, recanalization of the parent arteries, and histopathological outcomes were not significantly different between the two groups.ConclusionSGSs were as safe as IPM/CS for TAE of ANs in this swine model of knee arthritis.     

Personalized volumetric assessment of lower body muscles in patients with knee injuries: A descriptive case series

BackgroundPatients with knee joint pathology present with variable muscular responses across the muscles of the lower limb and pelvis. Conventional approaches to characterizing muscle function are limited to gross strength assessments that may overlook subtle changes both in the thigh, hip and shank musculature.PurposeTo describe individualized patterns of lower extremity muscle volumes in patients with knee pathologies.MethodsThis was a retrospective case series performed in a University medical center. Nine patients diagnosed with meniscus tear recommended to undergo meniscectomy volunteered. Participants underwent 3.0 Tesla magnetic resonance imaging (MRI) of the lower extremities. Thirty-five MRI-derived muscle volumes were compared between limbs and expressed as percentage asymmetry. For additional context, z-scores were also calculated for mass- and height-normalized muscles and pre-determined muscle groupings relative to a normative database.ResultsThere were no consistent patterns observed when considering between-limb asymmetries among all patients. The ankle musculature (dorsiflexors, plantar flexors, and invertors) was the only muscle group to be consistently smaller than normal for all patients, with the psoas major and flexor hallucis longus being the only individual muscles. The severity or chronicity of injury and presence of surgical intervention did not appear to have a clear effect on muscle volumes.ConclusionPatients with a history of meniscal pathology demonstrate inconsistent patterns of lower extremity muscle volumes about the hip, knee, and ankle between limbs and in comparison to uninjured individuals. These data support the need for individualized assessment and intervention in this population.