Small area influences on the individual unhealthy lifestyle behaviors: A multilevel analysis of discriminatory accuracy

We estimated the discriminatory power of area of residence (census tract) on the prevalence of main risk factors for chronic diseases. Results, based on a sample of 21,007 participants from the 2011–2012 National Health Survey of Spain, show a differential influence of the geosocial environment on the four health risk factors. Accounting for census tracts substantially increases the discriminatory power regarding at-risk alcohol consumption, unbalanced diet, and leisure-time sedentarism but not tobacco consumption. However, the socioeconomic characteristics of the tracts played a minor role. Further research on the specific geosocial contextual variables explaining variability in these risk factors is necessary.     

Diagnostic Utility of Platelet Count/Lymphocyte Count Ratio and Platelet Count/Mean Platelet Volume Ratio in Periprosthetic Joint Infection Following Total Knee Arthroplasty

BackgroundDiagnosing a periprosthetic joint infection (PJI) can be challenging and often requires a combination of clinical and laboratory findings. Monocyte/lymphocyte ratio, neutrophil/lymphocyte ratio, platelet/lymphocyte ratio (PLR), and platelet/mean platelet volume ratio (PVR) are simple predictors for inflammation that can be readily obtained from complete blood count. The aim of this study is to evaluate the diagnostic utility of these markers in predicting PJI in total knee arthroplasty (TKA) patients.MethodsA total of 538 patients who underwent revision TKA with calculable marker ratios prerevision in 2 groups were evaluated: (1) 206 patients with a preoperative diagnosis of PJI (group I) and (2) 332 patients treated for revision TKA for aseptic failures (group II). The diagnostic abilities of the markers were assessed via receiver operator characteristic curve analysis.ResultsThe optimal threshold of PVR at 30.82 had the highest sensitivity of 87.7%, while the optimal threshold of PLR at 234.13 had the highest specificity of 82.5%. Both PLR and PVR, when combined with Musculoskeletal Infection Society thresholds for erythrocyte sedimentation rate, C-reactive protein, synovial WBC, and PMN%, achieve significantly higher sensitivity and specificity rates for PJI at or above 97% (PLR: 99.03%; 98.80%; PVR: 98.54%;97.89%).ConclusionOur study demonstrates that PVR and PLR, which are readily available and inexpensive to obtain from complete blood counts, when combined with serum and synovial fluid markers have increased sensitivity and specificity comparable to that of alpha defensin. This suggests that PVR and PLR can be used together with other hematologic and aspirate markers to increase the accuracy of PJI diagnosis in TKA patients.     

Accuracy of Preoperative Templating in Total Hip Arthroplasty With Special Focus on Stem Morphology: A Randomized Comparison Between Common Digital and Three-Dimensional Planning Using Biplanar Radiographs

BackgroundAccurate preoperative planning is a key component of successful total hip arthroplasty (THA). The purpose of the present study was to compare the accuracy and reliability of three-dimensional (hipEOS) and common digital two-dimensional (TraumaCad) templating with special focus on stem morphology.Methods51 patients undergoing THA were randomized to two groups. Preoperative planning was performed on 23 patients with hipEOS (3D) and on 28 patients with TraumaCad (2D) planning software. Planning results were compared with the implanted component size. Inter- and intraobserver reliability as well as planning accuracy of both planning methods with special focus on straight and short stem design were recorded.ResultsIntraobserver reliability of both planning methods was good for component planning (ICC_2,1: 0.835-0.967). Interobserver ICC_2,1 for stem and cup planning were higher for 3D templating (3D ICC_2,1: 0.906-0.918 vs. 2D ICC_2,1: 0.835-0.843). Total stem and cup size predictions were within 2 sizes for 3D and within 3 sizes for 2D planning. Comparing short stem planning accuracy of both planning methods, absolute difference between implanted and planned component size was significantly lower in 3D planning (P = .029). There was no significant difference in straight stem (P = .935) and cup (P = .954) planning accuracy.ConclusionOur findings suggest that 3D templating with hipEOS software has a good overall reliability and may have a better planning accuracy of short stem prostheses than digital templating with TraumaCad software. Assuming that the number of implanted short stem prostheses will further increase in coming years, a more precise planning with 3D technique can contribute to improve surgery outcome.     

Evaluating Alternate Registration Planes for Imageless,Computer-Assisted Navigation During Total Hip Arthroplasty

BackgroundImageless computer navigation improves component placement accuracy in total hip arthroplasty (THA), but variations in the registration process are known to impact final accuracy measurements. We sought to evaluate the registration accuracy of an imageless navigation device during THA performed in the lateral decubitus position.MethodsA prospective, observational study of 94 patients undergoing a primary THA with imageless navigation assistance was conducted. Patient position was registered using 4 planes of reference: the patient’s coronal plane (standard method), the long axis of the surgical table (longitudinal plane), the lumbosacral spine (lumbosacral plane), and the plane intersecting the greater trochanter and glenoid fossa (hip-shoulder plane). Navigation measurements of cup position for each plane were compared to measurements from postoperative radiographs.ResultsMean inclination from radiographs (41.5° ± 5.6°) did not differ significantly from inclination using the coronal plane (40.9° ± 3.9°, P = .39), the hip-shoulder plane (42.4° ± 4.7°, P = .26), or the longitudinal plane (41.2° ± 4.3°, P = .66). Inclination measured using the lumbosacral plane (45.8° ± 4.3°) differed significantly from radiographic measurements (P < .0001). Anteversion measured from radiographs (mean: 26.1° ± 5.4°) did not differ significantly from the hip-shoulder plane (26.6° ± 5.2°, P = .50). All other planes differed significantly from radiographs: coronal (22.6° ± 6.8°, P = .001), lumbosacral (32.5° ± 6.4°, P < .0001), and longitudinal (23.7° ± 5.2°, P < .0001).ConclusionPatient registration using any plane approximating the long axis of the body provided a frame of reference that accurately measured intraoperative cup position. Registration using a plane approximating the hip-shoulder axis, however, provided the most accurate and consistent measurement of acetabular component position.     

Longer Term Outcomes Following High Tibial Osteotomy for Osteoarthritis: A Prospective,Multi-Centre Observational Study Comparing Tomofix and OPTY-LINE Devices

PurposeAssessing surgical accuracy and patient-recorded outcome measures for patients fitted with either the OPTY-LINE intramedullary realignment system or the Tomofix plate for medial opening wedge high tibial osteotomy (HTO).Patients and methodsTwo matched case series of patients with symptomatic medial compartment osteoarthritis without other significant knee pathology. One group comprised of 19 patients receiving the Tomofix plate, whereas another comprised of 12 patients receiving the OPTY-LINE intramedullary nail. Patella-centred long leg alignment radiographs were assessed to calculate surgical accuracy in all cases. Patients completed knee injury osteoarthritis outcome scores (KOOS) and osteotomy surgery patient satisfaction questionnaires pre-operatively and at 24 months post-surgery.ResultsAbsolute surgical accuracy at 2 years post-surgery was a mean 4.2 [standard deviation 3.7] for OPTY-LINE versus 9.2 [SD 7.8] for Tomofix (p = 0.11, Mann–Whitney U test). On average, patients in either the OPTY-LINE or Tomofix cohort reported at least a minimal perceptible clinical improvement—minimum average improvement of 15—for all five KOOS themes. No significant difference in change of KOOS scores over time or patient satisfaction levels were observed between the two cohorts.ConclusionThe OPTY-LINE device for HTO performs to a similar level as the Tomofix device. Surgical accuracy data are promising for OPTY-LINE, but does not seem to readily translate into difference in patient-reported outcomes compared to Tomofix. Even longer follow-up periods, to measure survival rates, and true randomised trials on larger samples can elucidate if there is a benefit for using one device over the other.     

Measuring physician practice site characteristics: A comparison of data from SK&A and a practice site survey

ObjectiveTo evaluate the comparability of commercially available practice site data from SK&A with survey data to understand the implications of using SK&A data for health services research.Data sourcesResponses to the Comprehensive Primary Care Plus (CPC+) Practice Survey and SK&A data.Study designComparison of CPC + Practice Survey responses to SK&A information for 2698 primary care practice sites.Data collectionCPC + Practice Survey data collected through a web‐only survey from April through September 2017, and SK&A data purchased in November 2016.Principal findingsInformation was similar across data sources, although some discrepancies were common. For example, 56% of practice sites had differences in the reported number of practitioners, and larger sites tended to have larger differences. Among practice sites with 1 practitioner in the survey, only 1.3% had a difference of 3 or more practitioners between the data sources, whereas 63% of practice sites with 11 or more practitioners had a difference of 3 or more practitioners.ConclusionsDiscrepancies between data sources could reflect differences of interpretation when defining practice site characteristics, changes over time in those characteristics, or data errors in either SK&A or the survey. Researchers using SK&A data should consider possible ramifications for their studies.     

DADE DIMENSION—RXL型全自动生化分析仪性能评价

目的：评价美国杜邦ＤＩＭＥＮＳＩＯＮ—ＲＸＬ全自动生化分析仪的工作性能。方法：用ＤＡＤＥ试剂及定值血清对该仪器的准确度、精密度及交叉污染等进行了观察。结果：对包括酶活性及电解质在内的十二项待测物进行了测试,其结果均位于可信范围内。精密度观察：批内不精密度的ＣＶ％为０．０７－１．４５％,批间不精密度ＣＶ％为０．５８－１．９５％。交叉污染率为０－０．５５１％。结论：通过准确度、精密度和交叉污染实验观察,作者认为该仪器可以满足临床化学实验室的要求。     

Assessment of pelvic stabilization devices for improved field reproducibility

The aim of this study was to evaluate the improvement in patient comfort and field positional accuracy provided by a new pelvic stabilization system when delivering multiple field radiotherapy to the pelvis. The Pelvic Cradle (BEHTS Manufacturing, Brisbane, Qld, Australia) is a stabilization device that provides reproducible patient positioning and levelling. Ninety patients were randomized into three groups. The first group was treated using the Pelvic Cradle, the second group was treated using current stabilization practices, and the third group was treated using the Pron Pillo (Chattanooga Pharmacal Company, USA) and current stabilization practices. Port films were assessed for field displacement in the lateral and cranio-caudal directions. A patient survey was used to evaluate the patient's perception of comfort while receiving treatment. When compared to the control group, the pelvic cradle group demonstrated a 48% improvement in the mean lateral deviation from 3.8 mm to 2.0 mm (P < 0.001) and a 36% improvement in the mean cranio-caudal deviation from3.9 mm to 2.5 mm (P < 0.001). The Pelvic Cradle was found to provide an improved level of field positional accuracy while maintaining patient comfort.     

Mechanical Accuracy of a New Stereotactic Guide

Summary ? Objective. A new stereotactic guide using a navigational computer is developed for stereotactic procedures. In order to compare the mechanical accuracy of the guide to frame based systems, an error analysis study was designed.  Methods. A biopsy procedure was simulated using a phantom model. Targets with known co-ordinates in a three-dimensional Cartesian co-ordinate system were positioned inside the skull model. A biopsy needle was inserted along computer set trajectories from three different entry points. The position of the biopsy needle in the co-ordinate system was measured. Distance from needle tip to target was calculated and defined as the error of the system for each trial. The results were statistically analyzed for precision and biasedness.  Results. A total of 242 accuracy measurements (182 on two MRI scans, 60 on one CT scan) were carried out. Mean incision length along the trajectories was 59 mm. Mean error using MRI scans was 3.8 mm and for the CT scan 2.9 mm. The error of the stereotactic computer was found to be 1.0 mm with both MR and CT imaging. The main cause of error for the MRI based trials was distortion of the magnetic field.  Conclusion. The results indicate a stereotactic system with high degree of accuracy. This is confirmed by a clinical study of 39 biopsies where all tumours were reached. MRI affected the mechanical accuracy significantly due to distortion of the magnetic field. The accuracy is comparable to other studies performed on both stereotactic computers and frame based systems.