Electric current induced in teeth by electromagnetic fields from electric toothbrushes and curing lights

PurposeThe purpose of this study was to examine the electric current induced in teeth and tooth-bonded brackets by electromagnetic fields from electric toothbrushes and the curing lights used for photo-activating light-cured resins.Materials and methodsCuring lights-generated low-frequency magnetic fields (1–2000 Hz) were measured with a spectrum analyzer. Temperature changes induced in the enamel and pulpal dentin surface of extracted upper premolar teeth (with or without a stainless steel or zirconia bracket) by electric toothbrushes and curing lights were estimated using an infrared thermometer. Electric current induced in these extracted teeth by electric appliances was estimated using a digital multimeter.ResultsCuring lights generated low-frequency magnetic fields. Irradiation of the tooth surface by curing lights elevated the temperature of the enamel and pulpal dentin surfaces, but there were no differences between curing lights. About electric current induced in extracted teeth (with or without a bracket) by electric toothbrushes and curing lights, the highest current was induced in teeth to which a zirconia bracket was bonded, whereas the lowest current was in unmodified teeth. Intermediate currents were generated in teeth bonded to stainless steel brackets.ConclusionThe low-frequency magnetic fields induced by electric toothbrushes and light curing units induce electric current in tooth tissue, irrespective of whether these teeth are bonded to stainless steel or zirconia brackets.     

Use of a triple antibiotic solution affects the healing process of intentionally delayed replanted teeth in mice

ObjectiveA mixture of ciprofloxacin, metronidazole, and minocycline (3Mix) has been reported to be effective against oral bacteria from carious and endodontic lesions in vitro and in vivo. The objective of this study was to establish an animal model using mice for the application of 3Mix following intentionally delayed tooth replantation and to investigate the effects of 3Mix on the healing process of dental pulp and periodontal tissues.MethodsUpper first molars of ICR mice were extracted, immersed in 3Mix solution at different concentrations for 5–60 min with or without the use of a transfer solution (phosphate buffer solution (PBS)), in addition to transfer solution alone, and subsequently repositioned in the sockets. Immunohistochemistry for nestin and Ki-67, histochemistry for TRAP, and TUNEL assay were performed to assess pulpal healing during days 7–21.ResultsIncreased apoptosis was observed in the PBS group at week 1, followed by cell proliferation at week 2, and tertiary dentin and/or bone-like tissue formation at week 3. In contrast, nestin-positive, newly differentiated, odontoblast-like cells began to align along the pulp–dentin border following the appearance of Ki-67- and TUNEL-positive cells during weeks 1–2 in the 3Mix groups, suggesting that pulpal healing was accelerated. Severe root ankylosis was observed exclusively in the 3Mix groups. Rinsing with PBS before replantation partially rescued the viability of the periodontal ligament, but pulpal healing was delayed.ConclusionsThe application of 3Mix promotes pulpal regeneration of intentionally delayed replanted teeth; however, its use may induce severe damage to periodontal tissues.     

Reports

Abstract

In the past, vertical intrusive movement of teeth has been considered difficult and most routine clinical vertical movement of teeth has been confined to extrusion. It has been suggested that attempts at intrusion may result in an increased incidence of root resorption and also in occasional devitalization.

The displacement and resulting stress fields associated with such treatment can be successfully studied using the finite element method. In the case being considered initial movements are known to be small; therefore, the assumption in the study that the material behaves linear-elastically is considered to be reasonable.

This study of vertical tooth movement demonstrated that the maximum cervical margin stress in the periodontal ligament was 0·0046 N/mm², whilst the highest apical stress was 0·00205 N/mm² when intrusive and extrusive forces of 1 Newton were applied to the buccal surface of the crown of a tooth model. These stresses were evaluated in the light of previous studies and found to be within the suggested clinical optimum level. However, the periodontal stress distribution following orthodontic loading within this three-dimensional finite element model was found to be highly complex.     

纤维桩修复喇叭口型根管的临床应用

目的观察D.T Light post纤维桩修复喇叭口型根管残根残冠的临床疗效。方法 26例患者需要修复的35颗患牙,经完善的根管治疗后,采用D.T Light post纤维桩,DUO-LINKTM双固化树脂粘接剂,Light-Core光固化树脂核材料恢复桩核,钴铬合金烤瓷冠修复。分别对患者于1、6、12、18、24个月随访观察,通过临床和X线片检查评估修复体的临床疗效。结果 35颗患牙均无桩冠脱落或松动,成功率为100%。结论 D.T Light post纤维桩系统材料修复喇叭口型根管的残根残冠效果良好,但长期效果有待进一步观察。     

Odontometric evaluation of mandibular premolars with tooth shape deviation: A case-control study

Objective:To evaluate the mean dimensions and morphologic characteristics of mandibular premolars that had mesiodistally elongated and faciolingually squeezed tooth shape deviations (MnP-TSD) and determine the population prevalence of this anomaly.Materials and Methods:Clinical photographs and study models were made for all new patients with MnP-TSD teeth who were seen over 20 years. The mesiodistal (MD) and faciolingual (FL) dimensions of the anomalous premolars were measured. MD/FL indices and MD × FL mm² occlusal crown areas were calculated and means and standard deviations were derived. Male and female means from the mandibular first and second anomalous premolars (MnP1/MnP2-TSD) were statistically compared against gender-specific means derived from published normative data using Student''s t-tests and chi-square tests.Results:Fifty-six individuals (33 male and 23 female) with MnP-TSD were identified, giving a male to female ratio of 1.4∶1, while the prevalence rate in the indigenous British population was estimated to be 0.6%. The MD widths of the MnP1-TSD and MnP2-TSD teeth were approximately 1 mm wider than normal, while the FL diameters were about 0.5 mm and 1.5 mm narrower respectively, for the first and second premolar teeth. The MD/FL indices, instead of being under 90 as usual were above 100, while the mean MD/FL mm² crown surface areas were normal.Conclusions:This study supplies odontometric dimensional and morphologic data on MnP-TSD teeth that provide a reference source for future comparisons.     

Influence of exposure time to saliva and antioxidant treatment on bond strength to enamel after tooth bleaching: an in situ study

Objectives

This study evaluated the influence of different exposure times to saliva in situ in comparison with an antioxidant treatment on composite resin bond strength to human enamel restored after tooth bleaching.

Material and Methods

Forty human teeth specimens measuring 5x5 mm were prepared and randomly allocated into 5 groups with 8 specimens each: Gct (control group, restored on unbleached enamel); Gbl (restored immediately after bleaching); Gsa (bleached, treated with 10% sodium ascorbate gel for 60 min and restored); G7d (bleached, exposed to saliva in situ for 7 days and restored); and G14d (bleached, exposed to saliva in situ for 14 days and restored). Restored samples were cut into 0.8 mm² sticks that were tested in microtensile. Specimens were microscopically analyzed and failure modes were classified as adhesive, cohesive, or mixed. Pretest and cohesive failures were not considered in the statistical analysis, which was performed with one-way ANOVA and Tukey''s post-hoc test (α=0.05), with the dental specimen considered as the experimental unit.

Results

Mean bond strength results found for Gbl in comparison with Gct indicated that bleaching significantly reduced enamel adhesiveness (P<0.01). However, no statistically significant differences were found between Gct, Gsa and G7d (P>0.05). Bond strength found for G14d was significantly higher than for Gsa (P<0.01). Fractures modes were predominantly of a mixed type.

Conclusions

Bonding strength to bleached enamel was immediately restored with the application of sodium ascorbate and exposure to human saliva in situ for at least 7 days. Best results were obtained with exposure to human saliva in situ for 14 days. Treatment with sodium ascorbate gel for 60 min may be recommended in cases patients cannot wait for at least 7 days for adhesive techniques to be performed.     

Accuracy of five electronic foramen locators with different operating systems: an ex vivo study

Objective:

The aim of this study was to evaluate, ex vivo, the precision of five electronic root canal length measurement devices (ERCLMDs) with different operating systems: the Root ZX, Mini Apex Locator, Propex II, iPex, and RomiApex A-15, and the possible influence of the positioning of the instrument tips short of the apical foramen.

Material and Methods:

Forty-two mandibular bicuspids had their real canal lengths (RL) previously determined. Electronic measurements were performed 1.0 mm short of the apical foramen (-1.0), followed by measurements at the apical foramen (0.0). The data resulting from the comparison of the ERCLMD measurements and the RL were evaluated by the Wilcoxon and Friedman tests at a significance level of 5%.

Results:

Considering the measurements performed at 0.0 and -1.0, the precision rates for the ERCLMDs were: 73.5% and 47.1% (Root ZX), 73.5% and 55.9% (Mini Apex Locator), 67.6% and 41.1% (Propex II), 61.7% and 44.1% (iPex), and 79.4% and 44.1% (RomiApex A-15), respectively, considering ±0.5 mm of tolerance. Regarding the mean discrepancies, no differences were observed at 0.0; however, in the measurements at -1.0, the iPex, a multi-frequency ERCLMD, had significantly more discrepant readings short of the apical foramen than the other devices, except for the Propex II, which had intermediate results. When the ERCLMDs measurements at -1.0 were compared with those at 0.0, the Propex II, iPex and RomiApex A-15 presented significantly higher discrepancies in their readings.

Conclusions:

Under the conditions of the present study, all the ERCLMDs provided acceptable measurements at the 0.0 position. However, at the -1.0 position, the ERCLMDs had a lower precision, with statistically significant differences for the Propex II, iPex, and RomiApex A-15.     

Effect of natural gel product on bovine dentin erosion in vitro

Objective

To evaluate the efficacy of Neem (Azadirachta indica) experimental gel for the prevention of erosive wear on bovine dentin, in vitro.

Material and Methods

One hundred dentin blocks were allocated into 5 experimental groups (20 samples each): C (control group, without gel); CG (control group, only base gel); F (fluoride gel, 1.23% NaF; pH 4.1, Dentsply; Brazil); N (Neem gel, 10% neem extract; pH 4.1, manipulation); NF (Neem+fluoride gel, 10% Neem extract and 1.23% NaF; pH 4.1, manipulation). The blocks were stored in artificial saliva for 24 hours. After this, they were submitted to six alternating re- and demineralization cycles. The blocks were analyzed for wear (profilometry). The results were submitted to statistical analysis by ANOVA and Tukey tests (P<0.05).

Results

The mean wear (±SD, µm) was shown as follows in groups: C (13.09±0.99), CG (10.60±1.99), F (10.90±1.44), N (12.68±1.13) and NF (10.84±1.65). All gels showed some preventive action when compared with control group. However, significant differences were found only between Neem+fluoride gel and fluoride gel.

Conclusion

A single application of a neem-containing fluoride gel reduced dentin erosion, thus it is a possible alternative in reducing dental wear. Further research should investigate the action mechanism and the synergism between them.     

Aberrant trafficking of a Leu89Pro connexin32 mutant associated with X-linked dominant Charcot–Marie–Tooth disease

Objective: To determine the functional abnormalities of the Leu89Pro mutation in connexin32 (CX32), which we have previously reported is present within an X-linked dominant Charcot–Marie–Tooth disease family. In this family, male patients were moderately to severely affected.

Methods: We performed immunofluorescence to investigate whether the Leu89Pro CX32 protein was transported to the cell membrane in HeLa and Schwann cells. First, we constructed the eukaryotic express plasmids expressing CX32 (wild-type or Leu89Pro) and enhanced green fluorescent protein by the gene recombination technology. Then the recombinant plasmids were transiently transfected into communication-incompetent HeLa cells and human Schwann cells by the lipofectamine method. Later, we double-labeled cells for both CX32 and markers of the ER (calnexin) or the Golgi (58-kDa protein) at 24 h or 48 h. The images were collected using a Leica TCS SP5 II confocal microscope.

Results: The mutant CX32 protein was localized in the endoplasmic reticulum and failed to reach the cell membrane to form gap junctions.

Conclusion: Our results indicated that the Leu89Pro substitution in the second transmembrane domain of CX32 disrupts the trafficking of the protein, inhibiting the assembly of CX32 gap junctions, which in turn may result in peripheral neuropathy. This functional abnormality may explain the moderate to severe phenotype seen in Leu89Pro patients, and as such represents a promising therapeutic target in the treatment of this subset of CMTX patients.