Case Study of Phrenic Nerve Paralysis: “I Can't Breathe!”

BackgroundThe anatomic course of the phrenic nerve runs in the fascia covering the anterior scalene muscle. Interscalene blocks are commonly performed by an anesthesiologist for shoulder surgery, such as a rotator cuff repair, total shoulder replacement, humeral fracture, or other arm surgery. Phrenic nerve palsy or paralysis is a known complication from interscalene block and is covered in multiple case reports and series in both Anesthesia and Neurosurgical literature, but only one case report in the Emergency Medicine literature.Case ReportThis case involves a 57-year-old man who had an uncomplicated arthroscopic rotator cuff repair with placement of interscalene block under care of anesthesia. He was discharged with a pain pump in place and then subsequently presented to the Emergency Department (ED) later that same day for evaluation of dyspnea. Using point-of-care ultrasound, his right diaphragm did not appear to be moving. Chest x-ray study revealed an elevated right hemidiaphragm. He was diagnosed with iatrogenic right phrenic nerve paralysis from interscalene block.Why Should an Emergency Physician Be Aware of This?Emergent diagnosis of phrenic nerve paralysis in the ED is complicated by a distressed patient and need for quick intervention. Most formal tests for this diagnosis are not immediately available to emergency physicians. Ultrasound is a rapid and reproducible, noninvasive resource with high sensitivity and specificity, making it an ideal imaging modality for the emergent evaluation of possible phrenic nerve palsy or paralysis.     

Customized three-dimensionally printed mandibular external fixator

The advent of customized three-dimensional (3D) printing allows the affordable manufacturing of sophisticated medical devices, thereby providing swift and simple solutions to specific needs in modern healthcare. Meanwhile, certain devices such as industrial mandibular external fixators (EFs) have become less and less available from medical device companies because of decreased indications. What is more, their handling is often complex. The authors report, step by step, the original design and uneventful clinical use of a 3D-printed, customized mandibular EF. This device was designed together with a positioning and drilling guide for the fixation of a septic mandibular pseudarthrosis. It provided an adequate and satisfactory balance between lightness and rigidity. A simple, accurate and safe placement of the EF was achieved thanks to the skin-supported positioner and drilling guide, thereby making the procedure minimally invasive and time-efficient. To our knowledge, this is the first reported clinical use of a 3D-printed, customized mandibular EF to date. Because such 3D technology is becoming increasingly available to a large number of surgeons, the authors believe that the present innovation could become an alternative to reusable standard EFs.     

Improved Diagnostic Sensitivity of Bowel Disease of Prematurity on Contrast-Enhanced Ultrasound

Bowel diseases of prematurity, including necrotizing enterocolitis, are dreaded ailments of neonates. Early diagnosis is difficult, with clinical and radiographic findings often inconclusive. We present a novel use of contrast-enhanced ultrasound in detection of pediatric bowel disease. Early identification of compromised blood flow or an at-risk bowel can be quantitatively detected and monitored. This ability has implications for guidance of emerging therapies, allowing targeting of inflammation. These findings represent an advancement in detection of bowel disease in neonates.     

Standard versus customised locking plates for fixation of schatzker ii tibial plateau fractures

Aim3D-printed implants could improve the capture of fracture fragments for improved stability of tibial plateau fracture fixation. The aim of this study was to compare the biomechanical strength of fixation constructs using standard and customised 3D-printed proximal tibial locking plates for fixation of tibial plateau fractures.MethodsThis is a biomechanical study utilising six pairs of cadaveric tibiae. Fractures were created in an identical fashion using an osteotome and mallet, and fixed using either a standard, commercially-available proximal tibia locking plate or a customised 3D-printed plate. Design and production of the customised plates followed a “3D printing at point-of-care” model. Customised stainless steel 316 L plates were produced within a local additive manufacturing laboratory based upon pre-operative CT scans. Determination of implant choice within each cadaver pair was performed via simple randomisation. Following fracture fixation, the tibiae were skeletalised and biomechanically tested using a customised loading jig and a size-matched femoral knee prosthesis. The constructs were loaded cyclically from 100 N to approximately three times the cadaveric body-weight at 5 Hz for 10 000 cycles. Every 1000 cycles, the test was paused and the tibia was physically checked for failure. If failure had not occurred by the end of the testing cycle, the construct was loaded to failure and the load at which the construct failed was noted.ResultsFixation constructs using the 3D-printed plates performed comparably to those using the standard plates. There was no significant difference in the degree of fracture fragment displacement in both constructs. Overall longitudinal construct stiffness and load to failure was higher in the 3D-plates group but this did not reach statistical significance.ConclusionProduction of customised plates for proximal tibia fractures at point-of-care is feasible, however fixation constructs with these plates did not provide any biomechanical advantage over standard plates in terms of axial loading stiffness.     

Bupropion Overdose Complicated by Cardiogenic Shock Requiring Vasopressor Support and Lipid Emulsion Therapy

BackgroundBupropion overdose is a commonly encountered presentation in the emergency department (ED). While the majority of cases resolve with supportive care, serious adverse effects, including seizures, cardiogenic shock, and death, can occur. Intravenous lipid emulsion (ILE) therapy has been utilized for a multitude of poisonings with varying levels of success. Although a number of cases suggest the value of ILE therapy in cases of bupropion overdose, more recent data propose that its role may be overstated.Case ReportA young woman presented to the ED with altered mental status complicated by seizure after bupropion overdose. She subsequently developed cardiogenic shock requiring vasopressor support. Bedside echocardiogram revealed a decreased left ventricular ejection fraction (LVEF). She received ILE therapy with significant improvement in both hemodynamic status and LVEF by bedside ultrasound.Why Should an Emergency Physician Be Aware of This?Although the majority of patients presenting with bupropion overdose improve with supportive care, life-threatening sequelae are possible. ILE therapy has shown promise in a variety of different overdose situations, although the evidence in cases of bupropion poisoning has been varied, and it has traditionally been utilized as a last-line rescue modality. Based on hemodynamic parameters and bedside ultrasound, this case suggests that early initiation of ILE therapy should be considered in these cases, as the potential benefits likely outweigh the theoretical risks.     

Sonodynamic Therapy: Advances and Challenges in Clinical Translation

Sonodynamic therapy (SDT) consists of the synergetic interaction between ultrasound and a chemical agent. In SDT, the cytotoxicity is triggered by ultrasonic stimuli, notably through cavitation. The unique features of SDT are relevant in the clinical context more than ever: the need for efficacy, accuracy, and safety while being noninvasive and preserving the patient's quality of life. However, despite the promising results of this technique, only a few clinical reports describe the use of SDT. The objective of this article is to provide an extensive overview of the clinical and preclinical research conducted in vivo on SDT, to identify the limitations, and to detail the developed strategies to overcome them.     

42例大面积烧伤病人血清维生素D水平分析

目的研究大面积烧伤病人体内血清维生素D水平情况。方法应用化学发光受体检测技术,对42例成年大面积烧伤病人血清维生素D进行检测。结果该组病人血清维生素D含量偏低,远远未达到健康人群水平(P<0.01)。结论大面积烧伤病人在长期住院后存在一定程度的维生素D不足,可能对病人的康复有负面影响,有必要在治疗过程中进行适当的补充。     

(-)-Epigallocatechin-3-gallate,reduces corneal damage secondary from experimental grade II alkali burns in mice

Background

Since recent reports have shown that (-)-Epigallocatechin-3-gallate (EGCG) could be used for treating proliferative and inflammatory disorders, we explored its use for the management of corneal chemical burns.