Prevalence of proximal tibia vara in Indonesian population with knee osteoarthritis

BackgroundProximal tibia vara has drawn interest since the concept of constitutional varus was introduced. Proximal tibia vara is a condition where the knee varus tilt the tibia condyle medially and shift the tibial articular surface medially. This condition affects medial proximal tibial angle measurements and the placement of the tibial implant in knee replacement surgery. Thus, it challenged the neutral knee arthroplasty alignment target because some people may present a proximal tibia vara. This study assesses the prevalence of the proximal tibia vara and the correlation to knee osteoarthritis grade.MethodsThis retrospective study was carried out from January 2021 to June 2021. Eighty-five limbs were included with the following inclusion criteria: knee osteoarthritis patients who received a long view lower extremity radiograph. The exclusions criteria were (1) patients who had undergone arthroplasty and lower extremity surgery before and (2) valgus knee deformity. The outcomes in this study were HKAA, MAD, TAD, MPTA, PTRP, LDFA, and PTS. Intraclass correlation (ICC) using two-way mixed was used to assess the reproducibility of the radiographic parameters. Multiple logistic regression was used to evaluate the correlation between knee osteoarthritis grade and radiographs parameters (MAD and TAD).ResultA total 85 limbs from 52 patients were assessed in this study. Proximal tibia vara was found in 18 knees (21%.). The logistic regression was performed to assess the correlation between the severity of the knee osteoarthritis and radiographic parameters (MAD, TAD, LDFA, and PTS) with an overall p-value < 0.001 and pseudo-R² = 0.29.ConclusionA significant portion of patients with knee osteoarthritis have proximal tibia vara, and it is a pre-existing condition. Since the pre-existing proximal tibia vara affects preoperative measurements, a long-standing lower extremity x-ray is recommended to be obtained as part of knee replacement preparation.     

Ankle fractures: High implant cost is not associated with better patient reported outcomes

IntroductionAnkle fractures comprise 9% of all fractures and are among the most common fractures requiring operative management. Open reduction and internal fixation (ORIF) with plates and screws is the gold standard for the treatment of unstable, displaced ankle fractures. While performing ORIF, orthopaedic surgeons may choose from several fixation methods including locking versus nonlocking plating and whether to use screws or suture buttons for syndesmotic injuries.Nearly all orthopaedic surgeons treat ankle fractures but most are unfamiliar with implant costs. No study to date has correlated the cost of ankle fracture fixation with health status as perceived by patients through patient reported outcomes (PROs). The purpose of this study was to determine whether there is a relationship between increasing implant cost and PROs after a rotational ankle fracture.MethodsAll ankle fractures treated with open reduction internal fixation (ORIF) at a level I academic trauma center from January 2018 to December 2022 were identified. Inclusion criteria included all rotational ankle fractures with a minimum 6-month follow-up and completed 6-month PRO. Patients were excluded for age <18, polytrauma and open fracture. Variables assessed included demographics, fracture classifications, Foot and Ankle Ability Measure-Activities of Daily Living (FAAM-ADL) score, implant type, and implant cost.ResultsThere was a statistically significant difference in cost between fracture types (p < 0.0001) with trimalleolar fractures being the most expensive. The mean FAAM-ADL score was lowest for trimalleolar fractures at 78.9, 95% CI [75.5, 82.3]. A diagnosis of osteoporosis/osteopenia was associated with a decrease in cost of $233.3, 95% CI [−411.8, −54.8]. There was no relationship between syndesmotic fixation and implant cost, $102.6, 95% CI [−74.9, 280.0]. There was no correlation between implant cost and FAAM-ADL score at 6 months (p = 0.48).ConclusionsThe utilization of higher cost ankle fixation does not correlate with better FAAM-ADL scores. Orthopaedic surgeons may choose less expensive implants to improve the value of ankle fixation without impacting patient reported outcomes.     

Comparison between tension band and cerclage with X-Plate and lag screws in treatment of comminuted patellar fractures

BackgroundComminuted patellar fractures are not rare, and the ideal treatment method remains controversial. The present study was conducted to evaluate effects and compare complications of two different methods used to treat comminuted patellar fractures.MethodsFrom March 2010 to August 2016, 102 cases of 34-C2 or 34-C3 comminuted patellar fractures were treated at our hospital, wherein patients received two different treatments: titanium cable tension band with cerclage method (group A) and intrafragmentary screws with X-shaped plating technique (group B). At follow-ups, articular step-off, range of motion (ROM), Lysholm scores, time of union, and complications were recorded and analyzed. Radiographic and clinical data as well as rate of complications were statistically analyzed.ResultsIn total, 87 patients were included in the final analysis (n = 47 in group A and n = 40 in group B). No significant differences were noted in terms of cost of implant, age, gender, rate of 34-C3 fractures, rate of layered inferior pole fractures, postoperative articular step-off and union time. At 2-year follow-up, average Lysholm scores, ROM and rate of complications were (89.0 ± 4.5), (122°±12°) and (27.7%) in group A and (90.2 ± 3.9), (124°±11°) and (17.5%) in group B, respectively, with no significant differences (p > 0.05). The mean time of surgery in group B was shorter than that in group A with significant difference (p < 0.05).ConclusionsTreatment using the intrafragmentary screws and plate method for amenable comminuted patellar fractures achieved similar complication rate and favorable functional outcomes at the 2-year follow-up, which was comparable to the titanium cable tension band with cerclage method. Thus, the intrafragmentary screws and plate method is effective, safe and convenient for 34-C2/C3 comminuted patellar fractures, especially appropriate for patients with layered fragments.     

Cirrhosis is independently associated with complications and mortality following operative treatment of acetabular fractures

IntroductionPatients with cirrhosis are at higher risk for morbidity after injury. Acetabular fractures represent a highly morbid injury pattern. Few studies have specifically examined an effect of cirrhosis on risk of complications after acetabular fracture. We hypothesized that cirrhosis is independently associated with increased risk of inpatient complications following operative treatment of acetabular fractures.MethodsAdults patients with acetabular fracture who underwent operative treatment were identified from Trauma Quality Improvement Program data from 2015 to 2019. Patients with and without cirrhosis were matched on a propensity score predicting cirrhotic status and inpatient complications based on patient, injury, and treatment characteristics. The primary outcome was overall complication rate. Secondary outcomes included serious adverse event rate, overall infection rate, and mortality.ResultsAfter propensity score matching, 137 cirrhosis+ and 274 cirrhosis- remained. No significant differences existed in observed characteristics after matching. Compared to cirrhosis- patients, cirrhosis+ patients experienced 43.4% (83.9 vs 40.5%, p < 0.001) greater absolute risk difference of any inpatient complication, 29.9% (51.8 vs 21.9%, p < 0.001) greater absolute risk difference of serious adverse events, 28.5% (41.6 vs 13.1%, p < 0.001) greater absolute risk difference of any infection, and 2.9% (2.9% vs 0.0%, p = 0.02) greater absolute risk difference of inpatient mortality.ConclusionCirrhosis is associated with higher rates of inpatient complications, serious adverse events, infection, and mortality among patients undergoing operative repair of acetabular fracture.Level of EvidencePrognostic Level III.     

Biomechanical analysis of a novel Y-plate designed for the treatment of extraarticular distal humerus fractures

Adult distal humerus fractures are infrequent, yet they account for one-third of all humerus fractures. For the treatment of comminuted and osteoporotic fractures, locking plates are claimed to be biomechanically superior to alternative internal fixing techniques. Treatment remains difficult despite recent advancements and the use of locking plates due to frequent comminution, low bone quality, and limited healing ability in osteoporotic bone. An optimal design of the newly constructed plate and the control model were selected. The biomechanical characteristics of non-osteoporotic and osteoporotic synthetic bone were compared on six models. The biomechanical properties of the new plate were tested and compared on 54 osteoporotic synthetic humerus models. The control models were reconstructive and parallel LCPs. The tests were carried out under static and dynamic axial, lateral and bending loads. Fracture displacements were measured by optical measuring system Aramis. The test model is significantly stiffer for lateral load (p = 0.0007) and for bending load at the moment of model failure (p = 0.0002), while for axial load the LCP model showed greater stiffness (p = 0.0017). During lateral dynamic loading, all three LCP models broke and there was a significant difference compared to the test model (p = 0.0125). The LCP model is dynamically significantly more durable under axial load, while the largest displacements were recorded with the test model (p = 0.029). The displacements induced by all three loads are within the limits that fulfil the parameters of appropriate biomechanical stability. A novel locking plate for extra-articular distal humerus fractures may provide an alternative to the traditional two-plate.     

Comparison of screw fixation versus non-fixation in dorsal opening wedge medial cuneiform osteotomy of adult acquired flatfoot

BackgroundThe aim of this study was to compare the radiographic and functional results between fixation and non-fixation in the Cotton osteotomy for the treatment of adult acquired flatfoot.MethodsA retrospective, case-controlled study of consecutive stage IIB posterior tibial tendon dysfunction (PTTD) patients treated with the same bony reconstructive surgery including cotton osteotomy between 2013 and 2017. Meary’s angle, the medial arch sag angle (MASA), and medial cuneiform cobb angle (MCCA) were evaluated pre-operation, at first weight bearing after surgery, and 12 months post operation.ResultsForty feet were included in the study. The cotton osteotomy utilized screw fixation (n = 20) or non-fixation technique (n = 20). No significant differences between groups were found in pre-operative and follow-up radiographic parameters, union rate, and functional results.ConclusionThe non-fixation with press fit technique is a reliable procedure for Cotton osteotomy and as effective as screw fixation.Level of evidenceLevel III, case control study     

Editorial Commentary: Meniscal Cartilage Suture in the Anterior Cruciate Ligament Reconstructed Knee; To Absorb or Not to Absorb: That Is the Question

When considering repair of the meniscal cartilages of the knee, the indications for repair must be carefully considered. The morphology of the tear, the zone of injury, and likely vascularity have an impact on patient selection. Patient factors, chronicity of tear, medial or lateral tear, and tear complexity all have a bearing on whether to repair or resect and how best to achieve stable repair. The consequences of meniscectomy are well established, and meniscal tissue resection comes at a cost. The success rates of meniscal cartilage repair are greater when performed in conjunction with anterior cruciate ligament reconstruction. Patient outcomes are better for anterior cruciate ligament reconstruction when performed with meniscal repair than when partial meniscectomy is performed. The optimal configuration of sutures, the suture material used, and the type of suture technique are all important considerations. The focus of this commentary is on the use of absorbable versus nonabsorbable suture material.