Recent advances and future innovations in shoulder arthroplasty: a review of the current literature

There have been incredible innovations in knowledge, techniques, and implants for total shoulder arthroplasty over the last few decades. On the humeral side, modularity has improved the ability to recreate native anatomy, while shorter humeral stems have improved our ability to preserve bone stock. On the glenoid side, the anatomic restoration and baseplate fixation have improved and augments have allowed surgeons to overcome bone loss. Future innovations in implant design, surgical technique and planning will continue to improve this operation. These will likely include robotic assisted surgery, augmented reality, patient specific guides, and others. In this review, the recent literature highlighting important recent innovations in the field of shoulder arthroplasty are critically reviewed and compiled. Recent innovations and projected future trends are discussed.     

Standard versus customised locking plates for fixation of schatzker ii tibial plateau fractures

Aim3D-printed implants could improve the capture of fracture fragments for improved stability of tibial plateau fracture fixation. The aim of this study was to compare the biomechanical strength of fixation constructs using standard and customised 3D-printed proximal tibial locking plates for fixation of tibial plateau fractures.MethodsThis is a biomechanical study utilising six pairs of cadaveric tibiae. Fractures were created in an identical fashion using an osteotome and mallet, and fixed using either a standard, commercially-available proximal tibia locking plate or a customised 3D-printed plate. Design and production of the customised plates followed a “3D printing at point-of-care” model. Customised stainless steel 316 L plates were produced within a local additive manufacturing laboratory based upon pre-operative CT scans. Determination of implant choice within each cadaver pair was performed via simple randomisation. Following fracture fixation, the tibiae were skeletalised and biomechanically tested using a customised loading jig and a size-matched femoral knee prosthesis. The constructs were loaded cyclically from 100 N to approximately three times the cadaveric body-weight at 5 Hz for 10 000 cycles. Every 1000 cycles, the test was paused and the tibia was physically checked for failure. If failure had not occurred by the end of the testing cycle, the construct was loaded to failure and the load at which the construct failed was noted.ResultsFixation constructs using the 3D-printed plates performed comparably to those using the standard plates. There was no significant difference in the degree of fracture fragment displacement in both constructs. Overall longitudinal construct stiffness and load to failure was higher in the 3D-plates group but this did not reach statistical significance.ConclusionProduction of customised plates for proximal tibia fractures at point-of-care is feasible, however fixation constructs with these plates did not provide any biomechanical advantage over standard plates in terms of axial loading stiffness.     

Clinical Effectiveness of Treatment Strategies for Prosthetic Joint Infection Following Total Ankle Replacement: A Systematic Review and Meta-analysis

Prosthetic joint infection (PJI) after total ankle replacement (TAR) is a challenging complication, which often requires debridement and implant retention (DAIR) with or without polyethylene exchange, revision surgery, implantation of a cement spacer, conversion to arthrodesis, or even amputation. The optimum treatment for ankle PJI is not well established. We conducted a systematic review and meta-analysis to compare the clinical effectiveness of various treatment strategies for infected ankle prostheses. We searched MEDLINE, Embase, Web of Science, and the Cochrane Library up to December 2018 for studies evaluating the impact of treatment in patient populations with infected ankle prostheses following TAR. Binary data were pooled after arcsine transformation. Six citations comprising 17 observational design comparisons were included. The reinfection rates (95% confidence intervals) for DAIR with or without polyethylene exchange, 1-stage revision, 2-stage revision, cement spacer, and arthrodesis were 39.8% (24.4 to 56.1), 0.0% (0.0 to 78.7), 0.0% (0.0 to 8.5), 0.2% (0.0 to 17.9), and 13.6% (0.0 to 45.8), respectively. Rates of amputation for DAIR with or without polyethylene exchange and cement spacer were 5.6% (0.0 to 16.9) and 22.2% (6.3 to 54.7), respectively. Measures of function, pain, and satisfaction could not be compared because of limited data. One- and 2-stage revision strategies seem to be associated with the lowest reinfection rates, but these findings are based on limited data. Arthrodesis and DAIR with or without polyethylene exchange appear to be commonly used in treating infected ankle prosthesis, but are associated with poor infection control. Clear gaps exist in the literature, and further research is warranted to evaluate treatment strategies for infected ankle prosthesis.     

骨填充网袋椎体成形术与经皮椎体后凸成形术治疗Kümmell病的疗效比较

目的比较骨填充网袋椎体成形术（Vesselplasty）与经皮椎体后凸成形术（percutaneous kyphoplasty，PKP）治疗 Kümmell 病的临床疗效。方法2015 年 1 月—2018 年 12 月收治 63 例 Kümmell 病患者，其中 28 例采用 Vesselplasty 治疗（Vesselplasty 组），35 例采用 PKP 治疗（PKP 组）。两组患者性别、年龄、病程、骨密度 T 值、骨折节段及术前疼痛视觉模拟评分（VAS）、Oswestry 功能障碍指数（ODI）、伤椎前缘高度、后凸 Cobb 角等一般资料比较，差异均无统计学意义（P>0.05），具有可比性。记录两组手术时间、术中透视时间、骨水泥注射量、骨水泥渗漏率、骨水泥弥散面积率和随访期间并发症发生情况，以及术前、术后 1 d、末次随访时 VAS 评分、ODI、伤椎前缘高度、后凸 Cobb 角。 结果两组患者均获随访，随访时间 12～36 个月，平均 24.2 个月。Vesselplasty 组手术时间、术中透视时间、骨水泥注射量、骨水泥弥散面积率均明显小于 PKP 组（P<0.05）。Vesselplasty 组骨水泥渗漏率（7.14%）明显低于 PKP 组（34.29%）（χ²=5.153，P=0.023）。两组患者术后 1 d 及末次随访时 VAS 评分、ODI、伤椎前缘高度、后凸 Cobb 角均较术前显著改善（P<0.05），术后两组间比较差异均无统计学意义（P>0.05）。随访期间两组均未见术椎再塌陷，Vesselplasty 组邻椎骨折发生率（7.14%）与 PKP 组（14.29%）比较，差异无统计学意义（χ²=0.243，P=0.622）。 结论Vesselplasty 和 PKP 治疗 Kümmell 病疗效相似，均能有效缓解患者疼痛症状，改善生活质量，部分恢复伤椎高度，矫正椎体后凸。但前者具有手术时间短、术中透视时间少、骨水泥渗漏少等优势。     

Work-related injuries in the Australian education sector: A retrospective cohort study

IntroductionEducators are exposed to several work-related hazards. Evidence suggests musculoskeletal pain, psychological distress, and student-inflicted violence-related injuries are common. However, there is little evidence on the burden of workplace injury among Australian educators.AimTo compare incidence of injury claims and duration of compensated time off work between educators and non-educators, and associated factors.MethodsRetrospective cohort study of 1,559,676 Australian workers’ compensation claims, including 84,915 educator claims, lodged between July 2009 to June 2015, from the National Dataset for Compensation-based Statistics. Cases were included if aged 18+ years and working in the education sector less than 100 h per week. Negative binomial regression models estimated the relative risk of making a compensation claim and survival analyses calculated disability duration within educators by sex, age, injury type and mechanism, socioeconomic area, remoteness, and jurisdiction.ResultsCompared to non-educators, educators had lower rates of injury claims and shorter disability durations. However, educators had a higher rate of claims for mental health conditions and assault, with the highest risk being among those in special education and education aides. Among educators, injury claim rates were highest among special educators, education aides, and secondary educators.Discussion and ConclusionThough surveys indicate Australians in the education sector have higher incidences of work-related injuries, this study found lower incidence of injury claims and shorter disability durations than others. Educators’ injury-reporting and absenteeism behaviors may be constrained by ethical, social, and administrative attitudes. Educators had higher rates of claims for mental health and assault-related injury, particularly special educators, and education aides, which suggests a need for targeted prevention efforts.