Perceptions and attitudes of Canadian orthodontists regarding digital and electronic technology.

INTRODUCTION: To plan for future acceptance and implementation of computer-related technology, it is necessary to understand orthodontists' current perceptions and attitudes toward emerging technologies. METHODS: An anonymous, self-administered, mail-out survey of Canadian orthodontists was conducted. The response rate was 45.6% (304/667). RESULTS: Most orthodontists indicated that computer technology could improve current practice efficiency and quality of patient care. Only 15% reported that digital models are quite or very useful; 73.6%, 69.1%, 55%, and 37.4% agreed or strongly agreed with using digital and electronic technology to consult with other dental specialists, other orthodontists, general dentists, and the public, respectively. Cost of the technology was reported as a significant or insurmountable obstacle by 54% of the respondents. Interprovincial legislation, unclear consultation remuneration guidelines, and lack of comfort with the technology were not perceived as significant obstacles. Only 36% reported security or privacy issues as a significant or insurmountable obstacle. CONCLUSIONS: Canadian orthodontists seem to view digital and electronic technology as useful and capable of improving their offices' efficiency and production. Although they are sensitive to some potential obstacles, they are willing to overcome these and incorporate the technology into their practices.     

恒定分压CO2对羟基磷灰石溶解度的影响

[目的]应用固体滴定技术监测羟基磷灰石(Hydroxyaptite,HA)的溶解平衡过程,观察组织液生理浓度CO2对羟基磷灰石溶解度的影响.[方法]在恒温水浴系统中以HA为固体滴定物.测试液为KCl溶液(0.1 mol/L),并引入恒定分压的CO2(占空气体积比为3.5%±0.1%).半导体二极管激光为发射光源,散射光源探测器用于监测HA的溶解平衡过程并判断超越溶解平衡点所出现的沉淀(合共17次滴定终点).固体滴定总量用于代表溶解度等温线上的数据点.[结果]引入恒定分压CO2后测定的HA在KCl溶液中的溶解度高于其在KCl溶液中所得50倍以上.[结论]固体滴定技术利于监测HA的溶解平衡过程.溶液体系中CO2增加HA的溶解度.推测该现象与CO2-3形成的复合物密切相关.     

Noninvasive tests for arterial structure, function, and compliance: do they identify risk or diagnose disease?

BACKGROUND: Brachial artery reactivity (BAR), carotid intima-media thickness (IMT), and applanation tonometry for evaluation of total arterial compliance may provide information about preclinical vascular disease. We sought to determine whether these tests could be used to identify patients with coronary artery disease (CAD) without being influenced by their ability to identify those at risk for CAD developing. METHODS: We studied 100 patients and compared 3 groups: 35 patients with known CAD; 34 patients with symptoms and risk factors but no CAD identified by stress echocardiography (risk group); and 31 control subjects. BAR and IMT were measured using standard methods, and total arterial compliance was calculated by the pulse-pressure method from simultaneous radial applanation tonometry and pulsed wave Doppler of the left ventricular outflow. Ischemia was identified as a new or worsening wall-motion abnormality induced by stress. RESULTS: In a comparison between the control subjects and patients either at risk for developing CAD or with CAD, the predictors of risk for CAD were: age (P =.01); smoking history (P =.002); hypercholesterolemia (P =.002); and hypertension (P =.004) (model R = 0.82; P =.0001). The independent predictors of CAD were: IMT (P =.001); BAR (P =.04); sex (P =.005); and hypertension (P =.005) (model R = 0.80; P =.0001). CONCLUSION: IMT, BAR, and traditional cardiovascular risk factors appear to identify patients at risk for CAD developing. However, only IMT was significantly different between patients at risk for developing CAD and those with overt CAD.     

Screw angulation affects bone-screw stresses and bone graft load sharing in anterior cervical corpectomy fusion with a rigid screw-plate construct: a finite element model study

Background contextAnterior corpectomy and reconstruction with bone graft and a rigid screw-plate construct is an established procedure for treatment of cervical neural compression. Despite its reliability in relieving symptoms, there is a high rate of construct failure, especially in multilevel cases.PurposeThere has been no study evaluating the biomechanical effects of screw angulation on construct stability; this study investigates the C4–C7 construct stability and load-sharing properties among varying screw angulations in a rigid plate-screw construct.Study designA finite element model of a two-level cervical corpectomy with static anterior cervical plate.MethodsA three-dimensional finite element (FE) model of an intact C3–T1 segment was developed and validated. From this intact model, a fusion model (two-level [C5, C6] anterior corpectomy) was developed and validated. After corpectomy, allograft interbody fusion with a rigid anterior screw-plate construct was created from C4 to C7. Five additional FE models were developed from the fusion model corresponding to five different combinations of screw angulations within the vertebral bodies (C4, C7): (0°, 0°), (5°, 5°), (10°, 10°), (15°, 15°), and (15°, 0°). The fifth fusion model was termed as a hybrid fusion model.ResultsThe stability of a two-level corpectomy reconstruction is not dependent on the position of the screws. Despite the locked screw-plate interface, some degree of load sharing is transmitted to the graft. The load seen by the graft and the shear stress at the bone-screw junction is dependent on the angle of the screws with respect to the end plate. Higher stresses are seen at more divergent angles, particularly at the lower level of the construct.ConclusionThis study suggests that screw divergence from the end plates not only increases load transmission to the graft but also predisposes the screws to higher shear forces after corpectomy reconstruction. In particular, the inferior screw demonstrated larger stress than the upper-level screws. In the proposed hybrid fusion model, lower stresses on the bone graft, end plates, and bone-screw interface were recorded, inferring lower construct failure (end-plate fractures and screw pullout) potential at the inferior construct end.     

Streptolysin O enhances keratinocyte migration and proliferation and promotes skin organ culture wound healing in vitro

ML-05, a modified form of the hemolytic and cytotoxic bacterial toxin, streptolysin O, is currently being investigated as a treatment for collagen-related disorders such as scleroderma and fibrosis. Furthermore, ML-05 may be effective in promoting wound healing and alleviating the formation of hypertrophic scars and keloids. To investigate the effects of ML-05 on wound-healing processes, in vitro wound-healing scratch assays (using human primary epidermal keratinocytes and dermal fibroblasts) and a human skin organ culture wound model were utilized. ML-05 markedly enhanced keratinocyte migration and proliferation in wound scratch assays. ML-05 did not affect either proliferation or migration of dermal fibroblasts, indicating that ML-05's effects on cell migration/proliferation may be keratinocyte-specific. ML-05 was tested in a dose-dependent manner in a skin organ culture wound model using two different application methods: Through the culture media (dermal exposure) or direct topical treatment of the wound surface. ML-05 was found to accelerate wound healing as measured by reepithelialization, particularly after topical application. Therefore, ML-05 may have potential as a wound-healing agent that promotes reepithelialization through stimulation of keratinocyte migration and proliferation.