Ultrasonic measurement of the effects of light irradiation and presence of water on the polymerization of self‐adhesive resin cement

Self‐adhesive resin cements are useful in restorations because they reduce the number of clinical steps involved in the restoration process. This study evaluated, using ultrasonic measurements, the influence of light irradiation and the presence of water on the polymerization behavior and elastic modulus of a self‐adhesive resin cement. A self‐adhesive resin cement (RelyX Unicem 2 Automix) or a resin cement (RelyX ARC) was inserted into a transparent mold on a sample stage, and the presence of water and effect of light‐irradiation were evaluated. The transit time of a sonic wave through the cement disk was divided by the specimen thickness to obtain the sonic velocity, and longitudinal and shear waves were used to determine the elastic modulus. When the resin cements were light‐irradiated, the sonic velocity rapidly increased and plateaued at 2,500–2,700 m s^?1. When the cements were not irradiated, the rates of increase in the sonic velocity were reduced. When water was applied to the sample stage, the sonic velocity was reduced. The elastic modulus values of the specimens ranged from 9.9 to 15.9 GPa after 24 h. The polymerization behavior of self‐adhesive resin cements is affected by the polymerization mode and the presence of water.     

Effect of a functional monomer (MDP) on the enamel bond durability of single‐step self‐etch adhesives

The present study aimed to determine the effect of the functional monomer, 10‐methacryloxydecyl dihydrogen phosphate (MDP), on the enamel bond durability of single‐step self‐etch adhesives through integrating fatigue testing and long‐term water storage. An MDP‐containing self‐etch adhesive, Clearfil Bond SE ONE (SE), and an experimental adhesive, MDP‐free (MF), which comprised the same ingredients as SE apart from MDP, were used. Shear bond strength (SBS) and shear fatigue strength (SFS) were measured with or without phosphoric acid pre‐etching. The specimens were stored in distilled water for 24 h, 6 months, or 1 yr. Although similar SBS and SFS values were obtained for SE with pre‐etching and for MF after 24 h of storage in distilled water, SE with pre‐etching showed higher SBS and SFS values than MF after storage in water for 6 months or 1 yr. Regardless of the pre‐etching procedure, SE showed higher SBS and SFS values after 6 months of storage in distilled water than after 24 h or 1 yr. To conclude, MDP might play an important role in enhancing not only bond strength but also bond durability with respect to repeated subcritical loading after long‐term water storage.     

Comparison between universal adhesives and two‐step self‐etch adhesives in terms of dentin bond fatigue durability in self‐etch mode

This aim of this study was to compare universal adhesives and two‐step self‐etch adhesives in terms of dentin bond fatigue durability in self‐etch mode. Three universal adhesives – Clearfil Universal, G‐Premio Bond, and Scotchbond Universal Adhesive – and three‐two‐step self‐etch adhesives – Clearfil SE Bond, Clearfil SE Bond 2, and OptiBond XTR – were used. The initial shear bond strength and shear fatigue strength of resin composite bonded to adhesive on dentin in self‐etch mode were determined. Scanning electron microscopy observations of fracture surfaces after bond strength tests were also made. The initial shear bond strength of universal adhesives was material dependent, unlike that of two‐step self‐etch adhesives. The shear fatigue strength of Scotchbond Universal Adhesive was not significantly different from that of two‐step self‐etch adhesives, unlike the other universal adhesives. The shear fatigue strength of universal adhesives differed depending on the type of adhesive, unlike those of two‐step self‐etch adhesives. The results of this study encourage the continued use of two‐step self‐etch adhesive over some universal adhesives but suggest that changes to the composition of universal adhesives may lead to a dentin bond fatigue durability similar to that of two‐step self‐etch adhesives.     

Clinical scale electroloading of mature dendritic cells with melanoma whole tumor cell lysate is superior to conventional lysate co-incubation in triggering robust in vitro expansion of functional antigen-specific CTL

Recent commercial approval of cancer vaccine, demonstrating statistically significant improvement in overall survival of prostate cancer patients has spurred renewed interest in active immunotherapies; specifically, strategies that lead to enhanced biological activity and robust efficacy for dendritic cell vaccines. A simple, widely used approach to generating multivalent cancer vaccines is to load tumor whole cell lysates into dendritic cells (DCs). Current DC vaccine manufacturing processes require co-incubation of tumor lysate antigens with immature DCs and their subsequent maturation. We compared electroloading of tumor cell lysates directly into mature DCs with the traditional method of lysate co-incubation with immature DCs. Electroloaded mature DCs were more potent in vitro, as judged by their ability to elicit significantly (p < 0.05) greater expansion of peptide antigen-specific CD8⁺ T cells, than either lysate-electroloaded immature DCs or lysate-co-incubated immature DCs, both of which must be subsequently matured. Expanded CD8⁺ T cells were functional as judged by their ability to produce IFN-γ upon antigen-specific re-stimulation. The electroloading technology used herein is an automated, scalable, functionally closed cGMP-compliant manufacturing technology supported by a Master File at CBER, FDA and represents an opportunity for translation of enhanced potency DC vaccines at clinical/commercial scale.     

Leukotriene C4 contents,synthase and catabolic activity in human meningiomas

Abstract

Leukotriene has been proposed as a factor of tumour induced brain oedema. Independently of its size, meningioma occasionally shows various extents of peritumoural oedema. We investigated LTC₄ tissue contentsLTC₄ catabolic and synthetic activity in 12 human meningiomas and their correlation with peritumoural oedema was studied. LTC₄ contents were varied from 0.01 to 8.21 pg/mg tissue. When LTA4/ an unstable expoxide intermediate was incubated with tumour homogenate, LTC₄ was rapidly synthesized. However; LTC₄ levels generated by incubating LTA4 with each homogenate were much different in each case. Degradation of LTC₄ to LTD4, LTE4, and other polar materials was also rapid by incubation with tumour homogenates. Approximately 70% of added UC₄ was transformed to LTD4/ LTE4 nor 6-trans LTB4 diastereoisomers during 30 min incubation at 37 °C. The results suggested that there were significant LTC₄ tissue contents and LTC₄ synthetic and catabolic activity in meningiomas. Oedema index ranged from 1.0 (no peritumoural oedema) to 67.5. No significant correlationi, however', was observed not only between the LTC₄ tissue contents and LTC₄ synthetic or catabolic activities but also between each of these three parameters and peritumoural oedema. Thus, these results do not support a significant correlation of sulfidopeptide LTs with oedema formation in meningioma patients. Since leukotrienes are extremely unstable compounds, LTC₄ tissue contents should be carefully discussed along with a consideration of rapid LTC₄ synthesis and catabolism. Further role of leukotrienes in meningioma tissue should be studied.     

Impact of next generation sequencing on diagnostics in a genetic skin disease clinic

Individuals with inherited skin diseases often pose one of the most difficult diagnostic challenges in dermatology. The hunt for the underlying molecular pathology may involve candidate gene screening or linkage analysis, which is usually determined by the initial history, the physical findings and laboratory tests. Recent technical advances in DNA sequencing, however, are shifting the diagnostic paradigm. Notably, next‐generation sequencing allows a more comprehensive approach to diagnosing inherited diseases, with potential savings of both time and money. In the setting of a paediatric dermatology genetics clinic in Kuwait, we therefore performed whole‐exome sequencing on seven individuals without a priori detailed knowledge of the patients’ disorders: from these sequencing data, we diagnosed X‐linked hypohidrotic ectodermal dysplasia (two cases), acrodermatitis enteropathica, recessive erythropoietic protoporphyria (two siblings) and localized recessive dystrophic epidermolysis bullosa (two siblings). All these groups of disorders are clinically and genetically heterogeneous, but the sequencing data proved inherently useful in improving patient care and avoiding unnecessary investigations. Our observations highlight the value of whole‐exome sequencing, in combination with robust bioinformatics analysis, in determining the precise molecular pathology and clinical diagnosis in patients with genetic skin disorders, notably at an early stage in the clinical evaluation of these often complex disorders and thereby support a new paradigm for future diagnostics.     

Influence of duration of phosphoric acid pre‐etching on bond durability of universal adhesives and surface free‐energy characteristics of enamel

The purpose of this study was to evaluate the influence of duration of phosphoric acid pre‐etching on the bond durability of universal adhesives and the surface free‐energy characteristics of enamel. Three universal adhesives and extracted human molars were used. Two no‐pre‐etching groups were prepared: ground enamel; and enamel after ultrasonic cleaning with distilled water for 30 s to remove the smear layer. Four pre‐etching groups were prepared: enamel pre‐etched with phosphoric acid for 3, 5, 10, and 15 s. Shear bond strength (SBS) values of universal adhesive after no thermal cycling and after 30,000 or 60,000 thermal cycles, and surface free‐energy values of enamel surfaces, calculated from contact angle measurements, were determined. The specimens that had been pre‐etched showed significantly higher SBS and surface free‐energy values than the specimens that had not been pre‐etched, regardless of the aging condition and adhesive type. The SBS and surface free‐energy values did not increase for pre‐etching times of longer than 3 s. There were no significant differences in SBS values and surface free‐energy characteristics between the specimens with and without a smear layer. The results of this study suggest that phosphoric acid pre‐etching of enamel improves the bond durability of universal adhesives and the surface free‐energy characteristics of enamel, but these bonding properties do not increase for phosphoric acid pre‐etching times of longer than 3 s.