aVR sign as a risk factor for life-threatening arrhythmic events in patients with Brugada syndrome

BACKGROUND: Risk stratification in Brugada syndrome (BS) is controversial, especially in asymptomatic individuals. OBJECTIVE: The aim of this study was to evaluate the significance of lead aVR in patients with BS. METHODS: Twenty-four patients with the electrocardiogram pattern of BS (24 male, mean age 32.1 +/- 13.6 years) and 24 healthy age- and gender-matched controls were studied. RESULTS: Thirteen patients were symptomatic. The R-wave amplitude or R/q ratio in lead aVR was significantly greater in patients experiencing a recurrence compared with those who did not. The aVR sign was defined as R wave >/= 0.3 mV or R/q >/= 0.75 in lead aVR. Most of the recurrences (78%) were in patients with present aVR sign; 84% of BS patients with present aVR sign had events during follow-up. In contrast, only 27% of BS patients with absent aVR sign had events during follow-up. CONCLUSION: Our study shows significant correlation between a prominent R wave in lead aVR (aVR sign) and risk for development of arrhythmic events in BS. In the presence of BS, prominent R wave in lead aVR may reflect more right ventricular conduction delay and subsequently more electrical heterogeneity, which in turn is responsible for a higher risk of arrhythmia.     

Screw angulation affects bone-screw stresses and bone graft load sharing in anterior cervical corpectomy fusion with a rigid screw-plate construct: a finite element model study

Background contextAnterior corpectomy and reconstruction with bone graft and a rigid screw-plate construct is an established procedure for treatment of cervical neural compression. Despite its reliability in relieving symptoms, there is a high rate of construct failure, especially in multilevel cases.PurposeThere has been no study evaluating the biomechanical effects of screw angulation on construct stability; this study investigates the C4–C7 construct stability and load-sharing properties among varying screw angulations in a rigid plate-screw construct.Study designA finite element model of a two-level cervical corpectomy with static anterior cervical plate.MethodsA three-dimensional finite element (FE) model of an intact C3–T1 segment was developed and validated. From this intact model, a fusion model (two-level [C5, C6] anterior corpectomy) was developed and validated. After corpectomy, allograft interbody fusion with a rigid anterior screw-plate construct was created from C4 to C7. Five additional FE models were developed from the fusion model corresponding to five different combinations of screw angulations within the vertebral bodies (C4, C7): (0°, 0°), (5°, 5°), (10°, 10°), (15°, 15°), and (15°, 0°). The fifth fusion model was termed as a hybrid fusion model.ResultsThe stability of a two-level corpectomy reconstruction is not dependent on the position of the screws. Despite the locked screw-plate interface, some degree of load sharing is transmitted to the graft. The load seen by the graft and the shear stress at the bone-screw junction is dependent on the angle of the screws with respect to the end plate. Higher stresses are seen at more divergent angles, particularly at the lower level of the construct.ConclusionThis study suggests that screw divergence from the end plates not only increases load transmission to the graft but also predisposes the screws to higher shear forces after corpectomy reconstruction. In particular, the inferior screw demonstrated larger stress than the upper-level screws. In the proposed hybrid fusion model, lower stresses on the bone graft, end plates, and bone-screw interface were recorded, inferring lower construct failure (end-plate fractures and screw pullout) potential at the inferior construct end.     

Linear and angular measurements of computer-generated models: are they accurate, valid, and reliable?

INTRODUCTION: Traditional advanced imaging modalities such as CT and MRI are limited in their ability to perform accurate linear distance and angular measurements regardless of anatomical orientation. The construction of 3D models has been used to perform anthropometric analyses as well as in the reconstruction of rapid prototypes. We hypothesized that such measurements would be precise to within 2 mm or 2 degrees of measurements performed with a coordinate measurement machine (CMM). We also hypothesized that there would be a high degree of interobserver reliability with these measurements. MATERIALS AND METHODS: Multiple aluminum screws were implanted in various positions in three foam pelvises which were subsequently scanned by CT and rendered as 3D models using a commercially available software package (Mimics). Linear and angular measurements were performed using a CMM machine, the software package, and a dial caliper or goniometer. The deviation of the measurements from the CMM data was compared using ANOVA. The interobserver reliability of both the manual and computer-generated measurements was calculated. RESULTS: The mean difference between the CMM distances and those measured manually and with the software was 2.12 +/- 1.20 mm and 1.57 +/- 1.05 mm, respectively. The mean difference between the CMM angular measurements and the angular measurements performed manually and with the software was 4.07 +/- 4.70 degrees and 1.62 +/- 1.32 degrees, respectively. In all cases, the manual measurements were significantly less accurate (p < 0.0001) and there was a high degree of interobserver reliability. CONCLUSIONS: Computer-generated measurements taken from three-dimensionally reconstructed models are more accurate than manual measurements and are within 2 mm and 2 degrees of measurements performed with a CMM. These measurements have high interobserver reliability.     

Lumbar Puncture Ordering and Results in the Pediatric Population: A Promising Data Source for Surveillance Systems

Background: The Centers for Disease Control and Prevention is incorporating laboratory data into real-time surveillance systems. When normal patterns of laboratory test orders and results are modeled, aberrations can be detected. Because many test orders are available electronically well before results, atypical patterns of test ordering may signal outbreaks.
Objectives: The authors sought to characterize baseline patterns in the ordering and early results of lumbar punctures, motivated by the possibility of using these data for real-time surveillance for early detection of meningitis or encephalitis outbreaks.
Methods: Retrospective cohorts of pediatric emergency department patients at a single hospital (1993–2003) and from the National Hospital and Ambulatory Medical Care Survey (1992–2000) were used for analysis.
Results: Test ordering exhibits seasonal patterns, with monthly peaks in January and August (p < 0.0001). For the hospital cohort, the rate of cerebrospinal fluid pleocytosis exhibits seasonal patterns (p < 0.0001), with a peak from August to October. This is strongly associated with the rate and pattern of clinical neurologic disease (p < 0.0001). A long-term secular decline in daily test ordering is evident, dropping from 5.3 to 2.9 in the hospital sample, and from 371.8 to 185.3 in the national sample (p < 0.001). The long-term rate of pleocytosis has declined (p < 0.0001), though the yield of testing for pleocytosis has improved (p = 0.0104).
Conclusions: Laboratory test patterns correspond with those of clinical disease and are a promising source of surveillance data. Using such data for real-time monitoring requires specific adjustments for patient age, periodicities, and secular trends.     

Rapid detection of the factor XIII Val34Leu (163 G-->T) polymorphism by real-time PCR using fluorescence resonance energy transfer detection and melting curve analysis.

The Val34Leu polymorphism in the A subunit of blood coagulation factor XIII (FXIII-A) is located in the activation peptide, just three amino acids upstream of the thrombin cleavage site. The Val-->Leu replacement accelerates the rate of the proteolytic activation of FXIII and it seems to provide protection against myocardial infarction. Methods available for the assessment of the FXIII-A Val34Leu polymorphism are rather time-consuming, laborious and not easily applicable for large-scale studies. In this study a new method based on real-time PCR with fluorescence resonance energy transfer (FRET) detection and melting curve analysis was developed. The rapid, simple method was adapted to the widely used real-time PCR instrument, LightCycler (Roche Diagnostics). The results showed 100% coincidence with those obtained by the traditional PCR-restriction fragment length polymorphism (RFLP) assay and fluorescent DNA sequencing. Using this method, an allele frequency of 24.2% was obtained (n=113), which well agrees with the allele frequency obtained by PCR-RFLP on a different group of the same ethnic Hungarian population (25.9%).     

Radiation doses deriving from patients undergoing 111In-DTPA-d-Phe-1-octreotide scintigraphy

The purpose of this study was to estimate the radiation doses to nursing staff, other patients, accompanying persons and family members deriving from patients undergoing ¹¹¹In-DTPA-d-Phe-1-octreotide (¹¹¹In-OCT) scintigraphy. Dose rates were measured from 16 patients who had received an intravenous injection of 140±40 MBq ¹¹¹In-OCT. The measurements were performed at three different distances (0.5, 1 and 2 m) at 10–20 min, 5–7 h and 24 h (and in some cases, up to 48 h) after administration of ¹¹¹In-OCT. The effective half-lives of the biexponential decrease of the dose rates were estimated to be 2.94±0.27 h (T ₁) and 65.17±0.58 h (T ₂). The calculated maximum dose to other persons in the waiting area was 27.2 μSv, to family members 61.5 μSv, to nursing staff in a ward 24.1 μSv and to neighbouring patients in the ward 69.5 μSv. Our results clearly demonstrate that the calculated maximum radiation exposure to accompanying persons, personnel, family members and other patients is well below the maximum annual dose limit for non-professionally exposed persons. Received 20 May and in revised form 9 July 1997     

Facial Nerve Neuroma: Surgical Concept and Functional Results

This study reviewed the management and outcomes of 11 facial nerve neuromas treated in our institution during the past two decades with particular emphasis on surgical concepts and functional outcomes. All patients underwent complete surgical resection of their tumor. Eight patients (73%) were followed on an outpatient basis. A retrospective chart review for pre- and postoperative clinical and radiological data was performed. All facial neuromas were multi-segment tumors. All segments of the facial nerve were represented, but 54% involved the geniculate ganglion and 45% involved the labyrinthine or tympanic portions of the nerve, or both. Depending on the extent of sensorineural hearing loss, surgical removal was performed through the middle cranial fossa or translabyrinthine approach. To obtain adequate nerve reconstruction, we combined intra- and extracranial approaches (e.g., the transmastoidal and transtemporal routes). Regardless of the type of nerve reconstruction, the best recovery achieved was moderate facial weakness (House-Brackmann Grade III) in 75% of the patients, even in a patient who was Grade IV preoperatively. The choice of treatment for facial neuromas and surgical approach depends on the extent of tumor, grade of facial palsy, and hearing function. When facial palsy is present, complete resection is clearly indicated. In patients without facial dysfunction, a conservative strategy consisting of clinical and radiological observation should be considered as a treatment option.