Complexities in the genetic structure of Anopheles gambiae populations in west Africa as revealed by microsatellite DNA analysis

Chromosomal forms of Anopheles gambiae, given the informal designations Bamako, Mopti, and Savannah, have been recognized by the presence or absence of four paracentric inversions on chromosome 2. Studies of karyotype frequencies at sites where the forms occur in sympatry have led to the suggestion that these forms represent species. We conducted a study of the genetic structure of populations of An. gambiae from two villages in Mali, west Africa. Populations at each site were composed of the Bamako and Mopti forms and the sibling species, Anopheles arabiensis. Karyotypes were determined for each individual mosquito and genotypes at 21 microsatellite loci determined. A number of the microsatellites have been physically mapped to polytene chromosomes, making it possible to select loci based on their position relative to the inversions used to define forms. We found that the chromosomal forms differ at all loci on chromosome 2, but there were few differences for loci on other chromosomes. Geographic variation was small. Gene flow appears to vary among different regions within the genome, being lowest on chromosome 2, probably due to hitchhiking with the inversions. We conclude that the majority of observed genetic divergence between chromosomal forms can be explained by forces that need not involve reproductive isolation, although reproductive isolation is not ruled out. We found low levels of gene flow between the sibling species Anopheles gambiae and Anopheles arabiensis, similar to estimates based on observed frequencies of hybrid karyotypes in natural populations.     

Is vector body size the key to reduced malaria transmission in the irrigated region of Niono, Mali?

Malaria vectors can reach very high densities in villages near irrigated rice fields in Africa, leading to the expectation that malaria should be especially prevalent there. Surprisingly, this is not always the case. In Niono, Mali, villages from nonirrigated areas have higher malaria prevalence than those within the irrigated regions, which suffer from higher mosquito numbers. One hypothesis explaining this observation is that mosquitoes from irrigated fields with high densities are inefficient vectors. This could occur if higher larval densities lead to smaller mosquitoes that suffer elevated mortality. Three predictions of the hypothesis were studied. First, the effect of larval density on larval body size was measured for both Anopheles gambiae Giles and Anopheles funestus Giles. Second, the relationship between larval and adult body size was tested. Third, evidence of an effect of adult size on survivorship in both irrigated and nonirrigated villages during the wet and dry seasons was sought. There was a modest positive relationship between densities of immatures and larval size, and a strong relationship between larval and adult size. Furthermore, adult survivorship was higher in nonirrigated areas. However, there was no effect of size on survivorship between comparable samples from both the irrigated and nonirrigated zones. Although density may have a causal relationship with reduced transmission in the irrigated areas of Niono, it is unlikely to be because higher density leads to smaller body size and lower survivorship.     

Reproduction-longevity trade-off in Anopheles gambiae (Diptera: Culicidae)

Reduced survival and future reproduction due to of current reproduction is a trade-off known as the cost of reproduction. Surprisingly, only a few studies have assessed the cost of reproduction in arthropod disease vectors, despite its effect on longevity, and thus on vectorial capacity. We evaluated the cost of reproduction on survival of Anopheles gambiae Giles by comparing mosquitoes that were denied exposure to the other sex, hereafter named virgins, and those that were allowed exposure to the other sex and mating, hereafter named mated. Merely 6 d of exposure to females with mating activity reduced male survival from a median of 17 d in virgins to 15 d in mated, indicating that male mating cost is substantial. The increase in mortality of mated males began several days after the exposure to females ended, indicating that mating is not associated with immediate mortality risk. Notably, body size was negatively correlated with male mortality in mated males, but not in virgins. The rate of insemination declined after 4 d of exposure to females, indicating that male mating capacity is limited and further supporting the hypothesis that mating is costly for males. Consistent with previous studies, female survival on sugar alone (median=16 d) was shorter than on blood and sugar (median=19 d), regardless if she was mated or virgin. Overall, survival of mated females was lower than that of virgins on a diet of blood and sugar, but no difference was found on a diet of sugar only. However, the cost of reproduction in females remains ambiguous because the difference in survival between virgin and mated females was driven by the difference between virgin (median=19 d) and uninseminated females exposed to males (median=17 d), rather than between virgin and inseminated females (median=19 d). Accordingly, sperm and seminal fluid, egg development, and oviposition have negligible cost in terms of female survival. Only exposure to males without insemination decreased female survival. Nonetheless, if exposure to males under natural conditions is also associated with reduced survival, it might explain why females remain monogamous.     

Optimization of formulation and process variable of nanosuspension: An industrial perspective

The objective of this study was to identify and optimize formulation and process variables affecting characteristic and scale up of nanosuspension manufacturing process on bead mill considering industrial perspective. Box-Behnken design was used for this study. Formulation factors evaluated were ratio of polymer to drug and ratio of surfactant to drug, whereas process parameters were milling time and milling speed. Responses measured in this study include zeta potential and, particle size distribution d(90). The ANOVA test reveals that ratio of polymer to drug and milling speed has significant effect on zeta potential whereas milling time and milling speed has significant effect on the particle size distribution of nanosuspension. The X-RD pattern of drug milled at high and low speed reveals no form conversion when compared to unmilled drug. The Box-Behnken design used in this study helped in identifying the factors affecting the particle size distribution d(90), zeta potential and, scalability of nanosuspension. The derived polynomial equation and contour graph aid in predicting the values of selected independent variables for preparation of optimum nanosuspension formulations with desired properties.     

Targeting the Over-Expressed Urokinase-Type Plasminogen Activator Receptor on Glioblastoma Multiforme

A recombinant fusion protein targeting the urokinase-type plasminogen activator receptor (uPAR) and delivering a potent catalytic toxin has the advantage of simultaneously targeting both over-expressed uPAR on glioblastoma cells and on the tumor neovasculature. Such a hybrid protein was synthesized consisting of the noninternalizing amino-terminal fragment (ATF) of urokinase-type plasminogen activator (uPA) for binding, and the catalytic portion of diphtheria toxin (DT) for killing, and the translocation enhancing region (TER) of DT for internalization. The protein was highly selective for human glioblastoma in vitro and in vivo. In vivo, this DT/ATF hybrid called DTAT caused the regression of small subcutaneous uPAR-expressing tumors with minimal toxicity to critical organs. In vitro, DTAT killed only uPAR-positive glioblastoma cell lines and human endothelial cells in the form of the HUVEC cell line. Killing was selective and blockable with specific antibody. DTAT was highly effective against tumor cells cultured from glioblastoma multiforme patients and in vitro mixing experiments combining DTAT with DTIL13 another highly effective anti-glioblastoma agent showed that the mixture was as toxic as the most potent immunotoxin. In this article, we review our progress to date with DTAT.     

Clinical characteristics of post-treatment reactions to ivermectin/albendazole for Wuchereria bancrofti in a region co-endemic for Mansonella perstans

Post-treatment reactions to single-dose ivermectin (200 microg/kg) and albendazole (400 mg) were studied in a filarial endemic region of Mali. The prevalence of Wuchereria bancrofti in this region was 48.3% (69 of 143), and coinfection with Mansonella perstans was common (30 of 40, 75%). Microfilarial levels of M. perstans correlated positively with age (P = 0.006) and with W. bancrofti microfilarial levels (P = 0.006). Forty individuals (28 infected and 12 uninfected) were treated, with mild post-treatment reactions occurring in 35.7% (7 of 28) of the W. bancrofti-infected subjects. Reaction severity correlated with pretreatment W. bancrofti microfilarial levels (P = 0.001). There were no significant differences in the prevalence or severity of post-treatment reactions in those who were co-infected with M. perstans. It is concluded that co-infection with M. perstans does not significantly alter the post-treatment reaction profile to single-dose ivermectin/albendazole in W. bancrofti infection in this community, and that acute post-treatment reactions should not limit patient compliance in community-based programs to eliminate lymphatic filariasis.     

用山羊建立下颌骨曲线牵张成骨实验动物模型

目的:探讨用山羊建立下颌骨曲线牵张成骨实验动物模型的可行性和优越性。方法:选用山羊4只,通过自行研制的下颌牵张器经口外途径建立2种下颌骨弧形缺损(下颌角及下颌骨正中联合部)牵张修复的动物模型。术后第6天开始牵引,速率1 mm/d,牵引25~34 d。结果:4只山羊的下颌骨弧形缺损成功地通过牵张成骨被修复,牵张间隙内新骨生成确切。结论:山羊是一种较理想而经济的进行牵张成骨基础研究的实验动物,所建动物模型具有很高的可行性和可重复性。     

Animal model for evaluation of strain gauge in mandibular distraction osteogenesis in rabbits

AIM: To design and assemble a distraction device with a strain gauge, and establish an animal model for testing it during mandibular distraction osteogenesis. METHODS: An osteotomy was made in the same position at the junction of mandibular angle and body in 12 rabbits. A customised distraction device attached to a strain gauge was used to distract the mandible. To find out which was the better material, both polyurethane and silicone were used as encapsulation material. After distraction, radiographs were taken, and specimens were examined histologically to record bone formation. RESULTS: Distraction osteogenesis was carried out successfully on all rabbits when the device used polyurethanes as the encapsulation material, it did not transfer the strain signals, but those made with silicone did. CONCLUSION: The device with silicone used as the encapsulation material can be used for strain-testing during mandibular distraction osteogenesis in a rabbit model.     

Spatial analysis of malaria transmission parameters in the rice cultivation area of Office du Niger, Mali

The effects of rice growth environment on malaria transmission, taking into account spatial correlation, were assessed in the Office du Niger, Mali. Between April 1999 to January 2001, 8 quarterly entomologic surveys were conducted in 18 villages in 3 agricultural zones. Vector densities in sleeping houses were related to rice crop, rice development stages, vegetation abundance, water state, and seasons. They were high throughout the rice-growing seasons, increased as the rice crop developed, and decreased as vegetation became abundant. They also showed large spatial correlations (up to 30.6 km). The vectorial capacity exhibited both seasonal and village-to-village variation. Parity and the human blood index were weakly related to adult densities and showed low spatial correlations (up to 3.4 km), which suggested that small area variation in malaria transmission results mainly from variations in vector-human contact. Control strategies in rice cultivation areas should pay attention to this local variation.