Innovative Thinking on Endpoint Selection in Clinical Trials

ABSTRACT

In clinical trials, selection of appropriate study endpoints is critical for an accurate and reliable evaluation of safety and effectiveness of a test treatment under investigation. In practice, however, there are usually multiple endpoints available for measurement of disease status and/or therapeutic effect of the test treatment under study. For example, in cancer clinical trials, overall survival, response rate, and/or time to disease progression are usually considered as primary clinical endpoints for evaluation of safety and effectiveness of the test treatment under investigation. Once the study endpoints have been selected, sample size required for achieving a desired power is then determined. It, however, should be noted that different study endpoints may result in different sample sizes. In practice, it is usually not clear which study endpoint can best inform the disease status and measure the treatment effect. Moreover, different study endpoints may not translate one another although they may be highly correlated one another. In this article, we intend to develop an innovative endpoint namely therapeutic index based on a utility function to combine and utilize information collected from all study endpoints. Statistical properties and performances of the proposed therapeutic index are evaluated theoretically. A numerical example concerning a cancer clinical trial is given to illustrate the use of the proposed therapeutic index.     

Bonding to industrial indirect composite blocks: A systematic review and meta-analysis

ObjectiveThe aim of this systematic review and meta-analysis was to evaluate the effect of surface conditioning methods on the bond strength of industrial indirect composite blocks (ICs).MethodsBased on the PICOS strategy, the Medline via PubMed, Embase and Web of Science (ISI – Web of Knowledge) electronic databases were searched for peer-reviewed articles in both English and Chinese, with no publication year limit. In vitro studies evaluating the effects of surface conditioning on the bond strength of ICs were selected. The meta-analysis was conducted to calculate the mean difference between surface-conditioned ICs and unconditioned controls. Subgroup analysis was performed to evaluate the different surface conditioning methods, separately for polymer-infiltrated ceramic network (PICN) material and the ICs with dispersed fillers (ICDFs). Meta-analyses were performed with a random-effects model at a significance level of 0.05.Results and SignificanceFrom 802 relevant studies, 25 were selected for full-text analysis. Nineteen studies were eligible for inclusion in this systematic review, whereas 9 studies were included in the meta-analysis. A manual search of the principal periodicals specific to the area resulted in no additional articles. The meta-analysis indicated a significant difference in bond strength between the surface-conditioned ICs and controls under both non-aged and aged conditions. The combination of mechanical and chemical conditioning yielded the highest bond strength of ICs. This meta-analysis suggests that chemical etching followed by a universal primer and alumina air abrasion followed by a silane coupling agent could be considered the best strategy for optimizing the bond strength of PICN materials and ICDFs under aged conditions, respectively.     

Measuring disease activity and response to treatment in rheumatoid arthritis

Introduction: Effective treatment of rheumatoid arthritis (RA) requires suppression of the underlying inflammation. Measurement of such inflammation, the disease activity, is mandatory to target treatment and maximize outcomes. However, this is not as straightforward as it may seem.

Areas covered: The many tools developed to measure disease activity in RA, from composite scores and patient-reported outcomes, to laboratory markers and imaging are discussed, with a focus on their utility in guiding therapy and assessing response. The complex issues in measuring disease activity in RA, whether in clinical trials or normal clinical practice, and in the context of national guidelines and recommendations, available time, and resources are considered.

Expert commentary: The key to effective management of RA is the rapid suppression of inflammation, ideally to remission, with maintenance of such remission. The aim is to prevent disability and maximize quality of life. Central to this is the ability to determine disease activity (potentially open to suppression) as opposed to damage (irreversible). A variety of measures are currently available, allowing better assessment of response to treatment. In the future, the development of predictive biomarkers allowing targeting of drugs may revolutionize this field and render the tools of today redundant.     

冰微粒致孔制备聚羟基丁酸酯(PHB)多孔支架

目的以冰粒子为致孔剂,用粒子滤出—冷冻干燥复合工艺制备PHB多孔支架。方法本实验以氯仿为溶剂,将PHB溶液浇入预先排列好的冰微粒空隙中,采用真空渗流方法制备冰微料-PHB复合体,液氮冷却成型后,用粒子滤出—冷冻干燥复合工艺制备多孔支架。通过扫描电镜(SEM)观测,研究该制备工艺对支架形貌的影响。结果制备的块状三维多孔支架孔径可调、孔隙结构良好、孔隙连通度高。结论本文工艺所制备的多孔支架无致孔剂残留,孔隙率高,孔隙连通度高,制备过程不会损害材料的生物相容性,可安全地用于组织工程可降解聚合物多孔支架的制备。     

复合树脂充填物与酸蚀牙齿间密合度的扫描电镜观察

用SEM观察6种复合树脂充填物与酸蚀牙齿间密合度。结果表明6种复合树脂充填物与牙齿间均有微缝隙,其宽度多数在5μm内,最宽为10～15μm。1月后再观察,清晰见到从酸蚀牙本质小管曳出的树脂突,其曳出方向与缝隙形成可能有关。     

耳垂复合组织游离移植修复鼻小柱过短畸形

目的 探讨因鼻小柱过短所致鼻尖低平畸形的矫治方法.方法 对8例鼻尖低平伴鼻小柱过短者,采用鼻小柱切口,首先应用肋软骨或Medpor行支撑杆移植矫正撑起鼻尖,鼻小柱切口的继发创面采用耳垂复合组织游离移植修复.结果 8例游离移植的耳垂复合组织均成活良好,随访1～2年形态满意,色泽与周围组织无明显差别,供区无明显继发畸形.结论 应用耳垂复合组织游离移植修复鼻小柱过短畸形,不仅适用于外伤性缺损修复,而且也适用于鼻部的美容性修复,是一种患者容易接受、操作简单安全、疗效好、供区无后遗明显继发畸形的修复方法.     

聚环氧氯丙烷／液晶复合富氧膜的研究

研究了聚环氧氯丙烷(PECHCH)/N(4-乙氧基苄叉)4-丁基苯胺(EBBA)复合膜对氧气和氮气的透过性和选择性。用示差扫描量热计(DSC)、解偏振光强仪(DLI和偏光显微镜考察了复合膜的形态结构。结果表明,当PECH/EBBA复合膜处于液晶的向列相转变温度时,有较高的气体透过性和选择性。发现只有复合膜中EBBA含量在30wt％以上,PECH和EBBA呈非均相混合时,才有较明显的富氧效果。当EBBA含量达50wt%时,氧氮分离系数α=3.78。     

Adhesive fragment reattachment after orthodontic extrusion: a case report

Abstract –  In the treatment of crown fractures, adhesive fragment reattachment provides a good alternative to other restorative techniques, offering several advantages. The present paper reports a case in which the treatment of a cervical crown fracture was accomplished by reattaching the tooth fragment with a flowable resin composite. Orthodontic root extrusion was performed with a modified Hawley appliance prior to fragment reattachment. The clinical and radiographic results after 2.5 years were successful.     

An Innovative Approach to Chairside Provisional Replacement of an Extracted Anterior Tooth: Use of Fiber-Reinforced Ribbon-Composites and a Natural Tooth

Immediate chairside replacement of an extracted anterior tooth may contribute to a patient's comfort, treatment acceptance, and expectations of treatment; however, fabrication of a custom restoration in the anterior region of the mouth may result in an esthetic compromise for patients during the fabrication period. Chairside tooth replacement is an excellent application of fiber-reinforced composite resin technology. This article presents an innovative, affordable chairside procedure in which Ribbond Multi-Purpose Bondable Reinforcement Ribbon is used to replace a single extracted anterior tooth using the patient's own tooth.     

Analysis of the degree of precision of a computer-assisted dietary survey method

A computer-assisted method for the registration of food intakes in real time according to a concise and simple procedure was subjected to a series of controls in order to assess precision. The method employs the 'portion' of a composite dish as unit of measure. The constancy of the portion was tested. The results show that the recipes of the diet of a subject may be stored and utilized in deferred time without loss of precision: data to be recorded in real time are then very limited. The length of period of analysis was also studied. The time of investigation should not be shorter than two weeks to obtain precise information on the feeding habits of an individual subject, whereas for a group of subjects the diary of a single day provides information of sufficient precision.