Brachytherapy: An emblematic example of extreme hypofractionated regimen

In order to provide more convenient irradiation regimens for patient comfort, radiation facility organization and health expenses, new hypofractionated protocols have been evaluated. Moderately (dose/fraction: 2.3 to 3 Gy), then ultra (dose/fraction: 5.2 to 6.1 Gy) hypofractionated irradiations were first validated. The current question is: is it possible to go forward using extreme hypofractionated regimens (EHR) based on 1 to 3 fractions. Different irradiation techniques are under investigation. However, brachytherapy remains the smartest way to deliver a high dose in a small volume. We report prospective and retrospective study results which evaluated EHR for breast and prostate brachytherapy. While oncological outcome and toxicity profile appear extremely encouraging for low-risk breast cancer after a 1 to 4 fractions (6.25 to 20 Gy/fraction), the use of a single fraction of 19 to 23 Gy appears debatable for prostate cancer. Brachytherapy represents an emblematic example of EHR but longer follow-up and more mature results are awaited in order to specify the right indications and refine the EQD2 calculation method including new biological and technical factors.     

Analysis of jump load during a volleyball season in terms of player role

ObjectivesThe aim of this study was to analyze the jump load performed by top-level volleyball players during an entire training season in terms of the player role, training period, type of daily training, and quality of opposition in the subsequent match.DesignLongitudinal panel observational study.MethodsThe total number of jumps performed by players was recorded through 174 training days distributed in 32 weeks during the 2016/2017 season (pre-season, 5 weeks; in-season, 27 weeks). The players role were classified as middle-blocker, outside-hitter, opposite and setter (the libero was omitted). A generalized mixed linear model was performed (with Bonferroni post hoc test at p < 0.05) to assess the effect of training variables and the repeated-measures data of players’ jumps along various training days. Additionally, the effect sizes at 95% confidence intervals were calculated to compare the jump load between players’ role and training variables.ResultsThe results showed a significant and moderate higher amount of jumps performed by middle-blockers regardless the type of macro- or micro-cycle, the micro-cycle phase, the type of training and the quality of match opposition. Contrarily, the setter performs the least jump load in all variables analyzed. Only the players’ role, macro-cycle and micro-cycle phase had significant effects on the player's jump load variation along the season.ConclusionsThis information could be useful to guide the monitoring and preparation process for coaches and physical trainers. These values allow differentiating between players’ role and could be used as references values in order to avoid injuries whereas performance increase along the season.     

Customized three-dimensionally printed mandibular external fixator

The advent of customized three-dimensional (3D) printing allows the affordable manufacturing of sophisticated medical devices, thereby providing swift and simple solutions to specific needs in modern healthcare. Meanwhile, certain devices such as industrial mandibular external fixators (EFs) have become less and less available from medical device companies because of decreased indications. What is more, their handling is often complex. The authors report, step by step, the original design and uneventful clinical use of a 3D-printed, customized mandibular EF. This device was designed together with a positioning and drilling guide for the fixation of a septic mandibular pseudarthrosis. It provided an adequate and satisfactory balance between lightness and rigidity. A simple, accurate and safe placement of the EF was achieved thanks to the skin-supported positioner and drilling guide, thereby making the procedure minimally invasive and time-efficient. To our knowledge, this is the first reported clinical use of a 3D-printed, customized mandibular EF to date. Because such 3D technology is becoming increasingly available to a large number of surgeons, the authors believe that the present innovation could become an alternative to reusable standard EFs.     

品管圈活动在喜疗妥联合新鲜马铃薯外敷治疗小儿输液外渗中的应用效果分析

目的探讨品管圈活动在喜疗妥联合新鲜马铃薯外敷治疗小儿输液外渗中的应用效果。方法选取我院2016年8月至2018年12月收治的输液外渗患儿100例,随机分为两组各50例。对照组给予50%硫酸镁湿敷治疗与常规护理,干预组采用喜疗妥联合新鲜马铃薯外敷,进行品管圈活动。对比两组的临床疗效、损伤痊愈时间和完全消肿时间。结果干预组的总有效率为90.00%,高于对照组的74.00%(P <0.05)。干预组的损伤痊愈时间和完全消肿时间短于对照组(P <0.05)。结论品管圈活动在喜疗妥联合新鲜马铃薯外敷治疗小儿输液外渗中的效果较好,可缩短临床症状消失时间,加快康复进程。     

轴向载荷分担比指导外固定器动力化的临床应用

目的:探讨轴向载荷分担比用于胫腓骨骨干骨折术后指导外固定器轴向动力化促进骨折愈合的有效性。方法:选取外固定器治疗的胫腓骨骨干骨折患者100例,随机分为观察组50例,对照组50例。观察组在轴向载荷分担比指导下行外固定器轴向动力化治疗,对照组未行动力化,随访比较两组的治疗效果。结果:所有患者均获随访,随访时间4～12个月,平均6.5个月,治疗期间所有患者均未出现外固定针断裂、松动及再骨折等并发症,观察组1例骨搬移患者轴向载荷分担比5%,X线片显示骨折断端有连续性骨痂通过,拆除外固定器连接杆后发生移位,恢复原数值行轴向加压再动力化,现已愈合。观察组除外1例骨搬移患者,其余49例患者外固定器固定时间为[(24.4±4.7)周],骨折临床愈合时间为[(22.4±4.7)周],与对照组50例患者外固定器固定时间[(29.3±5.6)周],骨折临床愈合时间[(27.3±5.6)周]比较,显著减少(P0.05)。结论:外固定器轴向载荷分担比指导胫腓骨骨干骨折外固定术后轴向动力化可以加速骨折愈合,但不适合骨搬移截骨端已硬化患者。     

嵌顿痔不同治疗方法疗效分析

目的探讨嵌顿痔不同治疗方法的疗效。方法回顾性分析2009年8月至2012年8月迁西县人民医院确诊为嵌顿痔的160例患者的临床资料,其中采取外剥内扎法的80例患者作为A组,吻合器痔上黏膜环切术(PPH)结合外痔血栓剥除术的80例患者作为B组。对比分析两组患者的手术时间、住院时间、住院费用等指标及临床疗效,对比分析两组术后6个月并发症发生情况。结果B组患者的手术时间、住院时间显著少于A组[(15.4±1.1)min比(38.7±0.5)min,(5.3±0.6)d比(12.4±1.3)d,P<0.01];B组患者的有效率显著高于A组(88.8%比66.3%),而总体并发症发生率及复发率显著低于A组(17.5%比33.8%,5%比18.8%,P<0.05)。结论 PPH结合外痔血栓剥除术临床疗效显著。     

Presentation and management of traumatic occipital spur fracture

Occipital spur is an abnormal bony outgrowth of the external occipital protuberance (EOP). We describe an interesting and previously unreported case of fracture of an occipital spur following trauma. Our 20-year-old male patient was treated in the emergency department (ED) and discharged home without complication. Neurosurgical consultation was obtained but is not requisite for these injuries. Greater awareness of this unique presentation may help to expedite future emergency department treatment.     

Fixator-assisted nailing of tibial fractures: New surgical technique and presentation of first 30 cases

Background

Intramedullary nailing is considered a “gold standard” for treatment of tibial shaft fractures. However, some types of fractures are typically considered as “difficult for nailing”. This group includes the periarticular fractures, fractures of both bones at the same level, comminuted and segmental fractures of the tibia. Fixator-assisted nailing (FAN) is an effective method treatment of these types of fractures. The main requirements for the ideal reduction device are an ease of its installation and an ability of multiplanar fracture reduction. Fixator-assisted nailing (FAN) with the use of two perpendicular to each other monolateral tubular frames perfectly meets these requirements. In this study we present this new surgical technique and the analysis of first 30 cases.