A case of sudden cardiac death due to mitochondrial disease

A 25-year-old, emaciated man without medical treatment was found to have died suddenly at home by his mother. At autopsy, there were no injuries to his body, but significant circulatory insufficiency was observed. Electron microscopy revealed abnormal mitochondria in cells of the cardiac conduction system. The conduction system was filled with mitochondrial size abnormalities and mitochondrial cristae abnormalities. No notable abnormal findings were observed in other organs. Genetic examination of the blood revealed the mitochondrial pathogenetic variant m.3243A>G. Epileptic seizures, diabetic ketoacidosis, and hyperosmolar hyperglycemic state were unlikely to be the cause of sudden death. The cause of death was diagnosed as arrhythmia possibly induced by the failure of the cardiac conduction system due to mitochondrial disease. This is a rare case of sudden death caused by an accumulation of abnormal mitochondria in the cardiac conduction system.     

Standard versus customised locking plates for fixation of schatzker ii tibial plateau fractures

Aim3D-printed implants could improve the capture of fracture fragments for improved stability of tibial plateau fracture fixation. The aim of this study was to compare the biomechanical strength of fixation constructs using standard and customised 3D-printed proximal tibial locking plates for fixation of tibial plateau fractures.MethodsThis is a biomechanical study utilising six pairs of cadaveric tibiae. Fractures were created in an identical fashion using an osteotome and mallet, and fixed using either a standard, commercially-available proximal tibia locking plate or a customised 3D-printed plate. Design and production of the customised plates followed a “3D printing at point-of-care” model. Customised stainless steel 316 L plates were produced within a local additive manufacturing laboratory based upon pre-operative CT scans. Determination of implant choice within each cadaver pair was performed via simple randomisation. Following fracture fixation, the tibiae were skeletalised and biomechanically tested using a customised loading jig and a size-matched femoral knee prosthesis. The constructs were loaded cyclically from 100 N to approximately three times the cadaveric body-weight at 5 Hz for 10 000 cycles. Every 1000 cycles, the test was paused and the tibia was physically checked for failure. If failure had not occurred by the end of the testing cycle, the construct was loaded to failure and the load at which the construct failed was noted.ResultsFixation constructs using the 3D-printed plates performed comparably to those using the standard plates. There was no significant difference in the degree of fracture fragment displacement in both constructs. Overall longitudinal construct stiffness and load to failure was higher in the 3D-plates group but this did not reach statistical significance.ConclusionProduction of customised plates for proximal tibia fractures at point-of-care is feasible, however fixation constructs with these plates did not provide any biomechanical advantage over standard plates in terms of axial loading stiffness.     

m6A结合蛋白IGF2BP1在肝细胞癌中的基因调控网络分析

目的 分析m6A阅读器胰岛素样生长因子2-mRNA结合蛋白1（insulin-like growth factor 2 mRNA-binding protein 1，IGF2BP1）在肝细胞癌（hepatocellular carcinoma，HCC）中的表达水平及其对HCC患者预后的影响，并探讨IGF2BP1在HCC发生发展中的作用及其潜在机制。方法 基于5对HCC癌及相应癌旁组织mRNA-seq数据和TCGA数据库LIHC的mRNA-seq数据综合分析IGF2BP1在HCC中的表达情况，同时利用TCGA数据库中343例HCC患者的临床随访资料分析IGF2BP1表达水平对HCC患者总生存期的影响。基于TCGA数据库筛选IGF2BP1的共表达mRNA，并利用m6Avar在线网站预测mRNA的m6A位点及其RNA结合蛋白等信息，最终构建IGF2BP1的基因调控网络。结果 IGF2BP1基因在HCC中表达上调（log2FC HCC转录组数据=10.684，P<0.001；log2FC TCGA-LIHC数据集=7.032，P<0.001）。生存分析显示IGF2BP1低表达的HCC患者中位生存时间为5.84年，IGF2BP1高表达患者为4.44年，高表达患者总生存期缩短（P=0.011）。22个差异表达的mRNA与IGF2BP1存在靶向结合关系，并与其表达水平呈正相关。其中，HMGA2等15个高表达mRNA的HCC患者总生存期缩短。HMGA2、PEG10、CEP55、RHO、CDC6和KIF23基因中的潜在m6A甲基化位点位于mRNA 3'UTR端的miRNA结合区域。结论 IGF2BP1在HCC中高表达且导致患者总生存期缩短。IGF2BP1可能通过m6A甲基化及miRNA抑制作用的方式上调mRNA的表达，促进HCC发生并导致不良预后。     

Same-Day Repeat Hepatopulmonary Shunt Measurement during Planning Angiography for Hepatic Radioembolization

This report describes a technique for measuring lung shunt fraction (LSF) twice in a single session during planning arteriography for radioembolization using low and standard dose technetium-99m macroaggregated albumin (^99mTc-MAA). A patient with a 16.0 cm hepatocellular carcinoma and LSF of 70% was treated with lenvatinib for 4 weeks. Planning arteriography with administration of 0.5 millicuries of ^99mTc-MAA was then performed. Arterial access was maintained while the LSF was calculated, which was persistently elevated at 54%. Embolization of arteriovenous shunts was performed during the same session and 5.0 millicuries of ^99mTc-MAA were administered. The repeat LSF was 29%. Successful radioembolization was subsequently performed.     

异常灌注评分法评价肺血栓栓塞症患者治疗效果的价值

目的 分析异常灌注评分法对肺血栓栓塞症（PTE）疗效的评估价值。方法 选择明确诊断为急性PTE的患者46例，在治疗前及治疗后14d行肺灌注显像，2位核医学科医师分别对肺灌注显像图进行定性分析，随后采用异常灌注评分法和Parker创建的肺段评分法进行肺灌注显像结果判读，比较两者在判读结果方面的一致性及其相关性，并比较2种方法所示的治疗后灌注改善率。结果 2位医师对左肺灌注结果判读的一致性为100％（Kappa值为1．0），对右肺灌注结果判读的一致性为91．3％（Kappa值为0．69）。治疗前后2种灌注评分结果均有较高度的一致性（Kappa值分别为0．657和0．665，P均〈0．001）。在治疗前和治疗后通过2种评分方法所计算的联合评分均呈显著正相关（r值分别为0．770和0．771，P均〈0．001）。肺灌注改善率在2种评分方法之间无显著差异（P=0．128）。结论 异常灌注评分法判读简单，是评价PTE治疗效果的较好方法。     

甲状腺~(99)Tc~mO_4~-显像冷结节的临床诊断价值

目的　探讨甲状腺99TcmO-4 显像冷结节对不同性质甲状腺疾病的诊断价值。方法　采用静脉注射99TcmO-4 185MBq ,2 0min后甲状腺前位静态显像 ,采集总计数 1× 10 6。显像显示甲状腺结节局部放射性分布缺损或低于正常甲状腺组织则定性为冷结节。结果　 34 2例甲状腺99TcmO-4 显像发现冷结节 85例 ,发生率为2 4.9% ,85例冷结节中 ,37例 (4 3.5 % )为甲状腺瘤 ,15例为甲状腺癌 (17.6 % ) ,2 0例 (2 3.5 % )为结节性甲状腺肿 ,8例 (9.4% )为甲状腺炎 ,4例 (4 .7% )为单纯性甲状腺囊肿 ,1例 (1.3% )为甲状腺外肿物。结论　冷结节在甲状腺99Tcm O-4 显像时较为常见 ,且不同性质甲状腺疾病的冷结节及其周围组织有一定的特征性表现 ,因此99TcmO-4显像冷结节对甲状腺腺瘤、甲状腺癌、甲状腺囊肿、甲状腺炎等常见疾病具有较高的临床价值。     

Bone scintigraphy in hereditary mutiple exostoses

A case of hereditary mutiple exostoses is presented. ^99mTc-MDP imaging demonstrated uptake of radiotracer in the lesions.     

Effects of 1.32-μm Nd-YAG laser on brain thermal and histological experimental data

Considering that the 1.32-μm Nd-YAG laser should have physicothermal properties close to those of the CO₂ laser, a series of experiments were conducted on rat cortex (N = 51). Three laser wavelengths were compared: CO₂ laser (10.6 μm), 1.06-μm Nd-YAG, and 1.32-μm Nd-YAG lasers. For each shot, temperature measurements were recorded with an infrared thermographic videocamera. The digitized signals were figured as thermal profiles and temperature developments. Ninety-five shots were correctly studied and analyzed: CO₂, N = 29; 1.06-μm Nd-YAG, N = 20; 1.32-μm Nd-YAG, N = 46. The histological lesions produced by these three lasers were compared on animals killed 24 hours (N = 20), 8 days (N = 20), and 30 days (N = 5) after the laser impacts. For equivalent densities of energy, the depth of cortical necrosis was comparable for the CO₂ laser (200–250 μm) and the 1.32-μm Nd-YAG laser (210–260μm) whatever the date of death; the 1.06-μm Nd-YAG laser shots were responsible for much more important damage (400–550μm). Because of its important absorption in water and nervous tissue, the authors consider the 1.32-μm Nd-YAG laser most suitable for neurosurgery, particularly because it is conducted through optic fibers, and therefore is easy to handle during neurosurgical procedures.