Modular Tibial Stem Use and Risk of Revision for Aseptic Loosening in Cemented Primary Total Knee Arthroplasty

BackgroundModular tibial stem extensions in total knee arthroplasty (TKA) are designed to reduce the risk of aseptic loosening of the tibial base plate. However, these implants add significant cost and an evaluation of their effectiveness in reducing this risk of loosening has not been studied in a large cohort. We sought to evaluate modular tibial stem utilization in primary TKA.MethodsWe conducted a cohort study using our integrated healthcare system’s Total Joint Replacement Registry. Patients who underwent cemented primary TKA were identified (2009-2019). Propensity scores were used to 1:1 match patients without to those with a stem extension. Cox proportional-hazards regression was used to evaluate the risk for revision due to aseptic loosening.ResultsTen thousand four hundred seventy six TKA with a modular tibial stem were matched to 10,476 TKA without a tibial stem. Stem utilization associated with a lower risk of revision for loosening across all postoperative follow-up (hazard ratio = 0.38, 95% confidence interval = 0.17-0.85).ConclusionIn a matched cohort study, we observed presence of a stem extension was associated with a lower risk of revision for aseptic loosening. Further study to identify specific risk factors for aseptic loosening and confirm the findings presented here are warranted.Level of EvidenceLevel III.     

Reduced Aseptic Loosening With Fully Cemented Short-Stemmed Tibial Components in Primary Cemented Total Knee Arthroplasty

BackgroundRecently, the use of short tibial stems in the obese population undergoing total knee arthroplasty (TKA) has been proposed. Thus, we designed a study to assess tibial component survivorship after primary TKA using a single implant both with and without a fully cemented stem extension performed by a single surgeon.MethodsA search of our institutional research database was performed. A minimum 2-year follow-up was selected. Cohorts were created according to patient body mass index (BMI; >40 kg/m² and <40 kg/m²) and the presence (stemmed tibia [ST]) or absence (non-stemmed tibia [NST]) of a short tibial stem extension. Kaplan-Meier survival analyses for aseptic loosening and log-rank tests were performed.ResultsA total of 236 patients were identified (ST = 162, NST = 74). Baseline patient characteristics were statistically similar between cohorts with the exception of BMI which was greater in the ST cohort (32.9 kg/m², 30.6 kg/m²; P = .01). Kaplan-Meier survival analysis at 5 years was superior for the BMI < 40 kg/m² cohort (98.9%, 93.1%; P = .045), the ST cohort (100%, 94.5%; P = .006), and the BMI > 40 kg/m² with ST cohort at 4 years (71.4%, 100%; P = .008).ConclusionMorbid obesity and a short native tibial stem design appear to be associated with aseptic loosening in primary TKA. This appears to be mitigated through the use of an ST. As such, the use of ST may be considered in at-risk patients. Alternatively, implants with longer native stem designs can be employed. Modern short-stemmed tibial components may need to be redesigned.     

A Novel Percentage-Based System for Determining Aseptic Loosening of Total Knee Arthroplasty Tibial Components

Background

There are limited data on evaluating the significance of radiolucent lines and aseptic loosening in total knee arthroplasty (TKA). We sought to compare the sensitivity, specificity, and reliability of the Knee Society Total Knee Arthroplasty Roentgenographic Evaluation and Scoring System (KSRES) in detecting tibial component loosening compared to a novel percentage-based system (PBS).

Correcting Severe Varus Deformity Using Trial Components During Total Knee Arthroplasty

Background

Extensive medial soft tissue release may be necessary to correct severe varus deformity during total knee arthroplasty (TKA). However, this procedure may result in instability. Here, we describe a novel soft tissue balancing technique, which can minimize medial release in severe varus deformity during TKA.

Total Knee Arthroplasty Using Adjusted Restricted Kinematic Alignment for the Treatment of Severe Varus Deformity: Technical Note

ObjectiveTo describe a new alignment technique of adjusted restricted kinematic alignment (arKA) for the treatment of severe varus deformity in total knee arthroplasty.MethodsThree female patients (three severe varus knees) who underwent navigation‐assisted total knee arthroplasty (TKA) using arKA from April 2020 to September 2020 were included in this study, with an average age of 71.33 years (range, 61 to 80 years). General anesthesia was given to all patients. Intraoperative observations including tibia resection angle, frontal femoral angle, axial femoral angle, medial and lateral gap in the extension and flexion positions and joint line translation were recorded. Also, operation duration and drainage volume were recorded. Radiographic parameters including the mechanical axis (α), coronal femoral component angle (β), coronal tibial component angle (γ), sagittal femoral component angle (δ), tibial posterior slope angle (ε), femoral‐patella angle (θ), and femoral notching were assessed. Clinical evaluation was performed using the Hospital for Special Surgery (HSS) Score and Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) Score. Both individual and mean measurement data were displayed.ResultsThe mean tibial resection was 4.00° varus (range, 3° to 5°), and the mean frontal femoral angle was 3.67° varus (range, 3° to 4°) in extension. The flexion lateral gap was wider than the medial gap with a mean laxity of 1.34 mm. Moreover, the mean axial femoral angle was 2.67° external (range, 0° to 6°) in flexion, and the mean joint line translation was 1.00 mm proximal (range, 0 to 3 mm). In addition, the mean preoperative mechanical axis was 156.22° (range, 153.65° to 158.90°) and the mean postoperative mechanical axis was 174.04° (range, 173.83° to 174.17°) with a mean correction of 17.82°. The mean femoral angle was 92.60° (range, 91.29° to 93.30°) and the mean tibial angle was 86.95° (range, 86.83° to 87.04°) in coronal plane. The HSS score improved from an average of 46.67 points (range, 42 to 51) preoperatively to 83.67 points (range, 81 to 86) at 3 months postoperatively. The mean WOMAC score was 16.33 points at 3 months postoperatively.ConclusionsThe new alignment technique of arKA aims to balance the flexion and extension gap without extensive releases of soft tissue and restore the native pre‐arthritic alignment, may be a promising alignment strategy for treating severe varus deformity. However, further study and comparison with other alignment techniques is needed.     

Isolated Versus Full Component Revision in Total Knee Arthroplasty for Aseptic Loosening

BackgroundRevision of both femoral and tibial components of a total knee arthroplasty (TKA) for aseptic loosening has favorable outcomes. Revision of only one loose component with retention of others has shorter operative time and lower cost; however, implant survivorship and clinical outcomes of these different operations are unclear.MethodsBetween January 2009 and December 2019, a consecutive cohort of revision TKA was reviewed. Univariate and multivariable analyses were used to study correlations among factors and surgical related complications, time to prosthesis failure, and functional outcomes (University of California Los Angeles, Knee Society functional, knee osteoarthritis and outcome score for joint replacement, Veterans RAND 12 (VR-12) physical, and VR-12 mental).ResultsA total of 238 patients underwent revision TKA for aseptic loosening. The mean follow-up time was 61 months (range 25 to 152). Ten of the 105 patients (9.5%) who underwent full revision (both femoral and tibial components) and 18 of the 133 (13.5%) who underwent isolated revision had subsequent prosthesis failure [Hazard ratio (HR) 0.67, P = .343]. The factor analysis of type of revision (full or isolated revision) did not demonstrate a significant difference between groups in terms of complications, implant failures, and times to failure. Metallosis was related to early time to failure [Hazard ratio 10.11, P < .001] and iliotibial band release was associated with more complications (Odds ratio 9.87, P = .027). Preoperative symptoms of instability were associated with the worst improvement in University of California Los Angeles score. Higher American Society of Anesthesiologists status and higher Charlson Comorbidity Index were related with worse VR-12 physical (?30.5, P = .008) and knee osteoarthritis and outcome score for joint replacement (?4.2, P = .050) scores, respectively.ConclusionIsolated and full component revision TKA for aseptic loosening does not differ with respect to prosthesis failures, complications, and clinical results at 5 years. Poor American Society of Anesthesiologists status, increased comorbidities, instability, and a severe bone defect are related to worse functional improvement.Level of evidenceIII, cohort with control.     

Metaphyseal Stem Extension Improves Tibial Stability in Cementless Total Knee Arthroplasty

BackgroundThe goal was to determine if the addition of a metaphyseal stem extension limits micromotion of a cementless tibial component during cyclic loading in primary total knee arthroplasty. The hypothesis tested was that the use of a 50-mm stem extension on a cementless tibial component would limit motion compared with an identical cementless component without a stem extension.MethodsThe study used 3 variations of a tibial component from the same total knee arthroplasty system. Group 1 consisted of a cementless tibial component without a stem extension. Group 2 used the same cementless component as group 1, but with the addition of a short 50-mm stem. Group 3 consisted of a cemented tibial component without a stem extension to serve as a “control” (gold standard). The tibial specimens were implanted into a synthetic bone model and tested using a physiological medial-lateral 60/40 load distribution for 5000 cycles.ResultsThe results demonstrated a significant decrease in motion at the anterior region of the cementless stem extension (group 2) components compared with the cementless with no stem extension (group 1). The cementless with stem extension (group 2) demonstrated similar results at all cycles to the cemented (group 3) components at the anterior region.ConclusionThe addition of a short metaphyseal stem (50mm) to a keel plus 4-peg tibial component design provides a significant reduction in micromotion during cyclic loading of a cementless tibial baseplate in a synthetic foam bone model, similar to a cemented implant.     

Catastrophic Varus Collapse of the Tibia in Obese Total Knee Arthroplasty

Background

Mechanical complications have been underemphasized in reports on total knee arthroplasty (TKA) in obese patients. Noticing an increased prevalence of varus collapse of the tibia in obese total knee patients, we sought to determine if variability in proximal tibial cancellous bone strength played a role in failure. We attempted to define a cancellous threshold above which alternative methods of fixation should be used.

Obesity Is Independently Associated With Early Aseptic Loosening in Primary Total Hip Arthroplasty

Background

Obesity affects millions of patients in the United States and is associated with several complications after total hip arthroplasty (THA). The effect of obesity on the rate and mode of primary THA failure remains poorly understood, especially given other potentially confounding patient characteristics. We hypothesized that, among patients with a failed primary THA, obesity is independently associated with aseptic loosening and a higher rate of early revision.

人工膝关节置换治疗膝外翻畸形的疗效

目的探讨全膝关节置换治疗膝关节外翻畸形的技术方法和临床效果。方法 2006年2月至2010年4月收治12例12膝外翻畸形患者,8例骨关节炎和4例类风湿性关节炎,应用人工全膝关节置换手术治疗。根据X线片比较术前和术后膝外翻角度,应用HSS膝关节评分系统进行临床效果评价。结果术后切口均一期愈合,无感染,无腓总神经麻痹发生;随访6~34个月,平均19个月;术前膝外翻角度13°~35°,平均(19.8±3.3)°,术后膝外翻角度4.9°~9.5°,平均(6.4±1.4)°,与术前比较差异有统计学意义(P0.05);术前HSS评分为31~63分,平均(38.0±2.7)分,术后末次随访膝关节HSS评分为78~89分,平均(84.0±2.9)分,与术前比较差异有统计学意义(P0.05)。结论人工全膝关节置换是膝关节炎合并外翻畸形的有效治疗方法。     

Cementless vs Cemented Tibial Fixation in Primary Total Knee Arthroplasty

Background

The ideal fixation for modern tibial components in total knee arthroplasty (TKA) remains controversial with uncertainty on whether cementless implants can yield equivalent outcomes to cemented fixation in early follow-up.

Contemporary Total Hip and Total Knee Arthroplasty Results in Patients with Hemochromatosis

BackgroundHemochromatosis can result in metabolic bone pathology (due to excessive iron absorption) and degenerative joint disease, leading to total joint arthroplasties. The aim of this study is to analyze the survivorship, complications, radiographic results, and clinical outcomes of patients with hemochromatosis who received either a total hip arthroplasty (THA) or a total knee arthroplasty (TKA).MethodsWe identified 34 lower extremity arthroplasties in 29 patients with hemochromatosis performed between 2000 and 2016. There were 17 primary THAs in 15 patients and 17 primary TKAs in 14 patients. Mean age at arthroplasty was 63 years with 76% being male. The mean body mass index was 28 kg/m². Mean follow-up was 5 years.ResultsThe survivorship free from any revision for THAs was 94% at 10 years. One patient was revised for aseptic loosening of the femoral stem at 6 months. In THA patients, no infections, no other complications, and no radiographic evidence of aseptic loosening were identified. Harris Hip Scores improved from a mean of 55 preoperatively to 94 postoperatively (P < .001). The survivorship free from any revision for TKAs was 100% at 10 years. Two patients (12%) developed acquired idiopathic stiffness postoperatively; no infections were identified. There was no radiographic evidence of aseptic loosening in any TKA. Knee Society Scores improved from a mean of 61 preoperatively to 94 postoperatively (P < .001).ConclusionThis study found excellent survivorship, significant improvements in clinical outcomes, and a very low complication profile for both THA and TKA in patients with hemochromatosis.     

The Position of the Tibial Component Affecting the Postoperative Mechanical Axis in Total Knee Arthroplasty

The purpose is to identify whether the position of the tibial component in relation to the anatomical axis affects the postoperative mechanical axis in total knee arthroplasty for Korean patients. Preoperatively, 30 patients with varus deformity lesser than 10° were classified as group A, and 30 patients greater than 10° were classified as group B. Postoperatively, the distance between the midline of the tibial stem and anatomical axis (medial offset) was measured. The medial offsets were 2.5 ± 1.9 mm in group A and 3.9 ± 2.7 mm in group B (P = .021). The postoperative mechanical axes were varus 1.3 ± 1.2° in group A and varus 2.5 ± 2.0° in group B (P = .004). We think that the medial position of tibial component in relation to the anatomical axis affects the measurement of postoperative mechanical axis in total knee arthroplasty.     

All-Polyethylene Tibial Component Use for Elderly,Low-Demand Total Knee Arthroplasty Patients

Background

Potential advantages combined with lower cost have prompted a renewed interest in modern all-polyethylene tibial designs.

Tibial Component Alignment After Total Knee Arthroplasty with Intramedullary Instrumentation: A Prospective Analysis

The best operative technique for achieving appropriate postoperative alignment following total knee arthroplasty (TKA) remains controversial, with proponents of extramedullary, intramedullary and computer-assisted techniques. One hundred ninety-two consecutive patients undergoing TKA were prospectively evaluated with full-length lower extremity radiographs. Patients underwent cemented TKA using femoral and tibial intramedullary instrumentation. Digital radiographs were analyzed using PACS (AGFA Healthcare, Ridgefield Park, NJ) software. Tibial component alignment was measured in the coronal and sagittal planes. Tibial component slope averaged 3.89° + 1.96 for the cruciate-retaining components and averaged 1.7° + 1.92 for PS components. The average coronal tibial component alignment was 90.00°, and 99% were within 3° of neutral mechanical alignment with only 2 (1%) outliers. Intramedullary instrumentation resulted in excellent postoperative tibial component and lower extremity alignment.     

Accuracy of Implant Positioning for Minimally Invasive Total Knee Arthroplasty in Patients With Severe Varus Deformity

Minimally invasive surgery (MIS) in total knee arthroplasty (TKA) reportedly yields decreased patient morbidity and a rapid return of function, but how much deformity can be accepted for MIS-TKA remains unclear. This study investigated 238 knees from 218 consecutive patients who underwent MIS-TKA. Patients were divided into groups with tibiofemoral mechanical axis (TFM) 195° or greater and TFM less than 195°, then clinical and radiographic results were compared. Similar improvements in knee score at 3 months postoperatively were obtained in the both groups, whereas radiographic accuracy of the coronal alignment in the TFM ≥195° group was inferior to that in TFM <195° group. Postoperative TFM was significantly worsened in patients with lateral bowing angle of the femoral shaft (LBFS) 4° or greater, and 53% of patients in the TFM ≥195° group displayed LBFS 4° or greater, explaining the inferior radiographic accuracy in this group compared with the TFM <195° group. These results indicate that use of MIS techniques decreases radiographic accuracy, particularly in patients with severe genu varum and increased LBFS.     

Deformation and Loosening of the Tibial Component in Knee Arthroplasty with Unicompartmental Endoprostheses

Roentgenological signs of deformation and loosening of the tibial component in knee arthroplasties with unicompartmental endoprostheses occurred in one-third of 87 rheumatoid (RA) knees within 2 years and in one-fifth of 107 osteoarthritic (OA) knees within 3 years after the operation. Compared with thicker components significantly more 6 mm components in RA, and 6 and 9 mm components in OA became deformed and loose. There was no difference in the clinical assessment of the knees with and without deformed tibial components. Reoperations were recorded during an extended follow-up. In the group with initially asymptomatic loosening twelve RA knees within four and a half years and three OA knees within four years developed pain on weight-bearing and had to be reoperated. One patient (OA) had loose components without any roentgenological signs; the loosening was first discovered when the unoperated compartment was revised because of secondary osteoarthrosis. Knees fitted with 6 mm components more often required reoperation because of loosening than did those with thicker components.     

Diagnosis and Detection of Subtle Aseptic Loosening in Total Hip Arthroplasty

Aseptic loosening is a common cause of revision total hip arthroplasty (rTHA), and with the rising number of primary THAs, revisions for aseptic loosening represent a significant burden for arthroplasty surgeons. Aseptic loosening remains a diagnostic and management challenge. Loosening can occur as a result of inadequate initial fixation, mechanical loss of fixation over time, or a biological loss of fixation over time. However, in most cases, etiology is multifactorial, involving all 3 factors. The diagnosis of aseptic loosening involves a careful history, focused clinical exam, and thorough evaluation of imaging using several diagnostic modalities. The careful evaluation of serial radiographs remains the cornerstone of diagnosis with additional input from advanced imaging modalities such as FDG-PET, DEXA, MRI, and several others, each offering unique advantages and disadvantages. In certain patients, history and physical exam might be the only initial obvious signs of loosening, and thus, unexplained continuous pain augmented by imaging findings serves as an indication for revision surgery.     

Radiographic Findings in Patients With Catastrophic Varus Collapse After Total Knee Arthroplasty

Background

Catastrophic varus collapse is an uncommon mechanism of failure in primary total knee arthroplasty (TKA). Varus collapse has been associated with obesity and smaller implant sizes. However, to our knowledge, preoperative radiographic characterization of this cohort has not been performed. Therefore, the following study evaluated preoperative alignment and how this correlates with the degree of eventual varus collapse identified in this patient population prior to revision.

Trends in the Use of High-Viscosity Cement in Patients Undergoing Primary Total Knee Arthroplasty in the United States

Background

Aseptic loosening remains the most common mode of failure following total knee arthroplasty (TKA). Although the risk of loosening is multifactorial, recent studies reported early failure via debonding at the tibial implant-cement interface and a potential association with high viscosity cement (HVC). The purpose of this study is to determine the type of cement used by surgeons performing elective, primary TKA in the United States.