Detection of porcine-derived ingredients from adulterated meat based on real-time loop-mediated isothermal amplification

Increasingly globalized and complex food supply chains contribute to a growing problem of meat fraud. Meat adulteration with pork is especially exceptionable to the global population for health concern and religious faith reasons. To prevent unfair competition and protect consumer rights, an efficient and rapid assay to identify the species of meat products is crucial. In this study, a real-time loop-mediated isothermal amplification (real-time LAMP) assay was developed for the detection of a porcine gene in meat products. The designed primers were highly selective for the porcine gene. The amplification showed no cross-reactivity with 11 other meats. The established method required 20 min with an initial amplification curve of approximately 10 min and demonstrated a detection limit of 1.76 pg/μL porcine DNA, which is 1000 times more sensitive than PCR. This study is the first attempt at detecting porcine-derived ingredients using a real-time LAMP assay in commercial products. This method meets specificity, rapidness, robustness, and sensitivity criteria; its practical application will greatly aid in battling adulteration in the food industry.     

Detection of Mycoplasma pneumoniae using a highly sensitive rapid diagnostic method with silver amplification technology

To prevent an increase in the frequency of antimicrobial resistance (AMR), the specific and rapid diagnosis of causative pathogens is important, as the results can be used to initiate appropriate antibiotics treatment. Recently, the highly sensitive rapid immunochromatographic assay of silver amplification technology was developed for the detection of Mycoplasma pneumoniae. We investigated the sensitivity and specificity of the silver amplification immunochromatographic assay in adolescent and adult patients. A total of 767 patients with respiratory tract infection (RTI) and 605 with pneumonia were assessed by the silver amplification assay and real-time polymerase chain reaction (PCR). M. pneumoniae was identified by PCR in 95 patients with RTI and in 30 patients with community-acquired pneumonia (CAP), but it was not identified in patients with nursing- and healthcare-associated pneumonia. Eighteen of the 95 RTI patients and 7 of the 30 CAP patients with PCR-positive M. pneumoniae were found to be infected with macrolide-resistant M. pneumoniae. When PCR was used as the control test, the sensitivity, specificity, and overall agreement with the silver amplification assay were 90.5%, 99.0%, and 97.9%, respectively, in RTI patients and 90.0%, 99.1%, and 98.7%, respectively, in pneumonia patients. Our results show that the silver amplification assay has excellent sensitivity and specificity compared with PCR despite being a rapid diagnostic method. The silver amplification assay may be helpful for initiating appropriate antibiotic treatment and preventing AMR.     

Development of a recombinase polymerase amplification fluorescence assay to detect feline coronavirus

Feline coronavirus (FCoV) is classified into two pathotypes: the avirulent feline enteric coronavirus (FECV), and the virulent feline infectious peritonitis virus (FIPV). Rapid pathogen detection, which is efficient and convenient, is the best approach for early confirmatory diagnosis. In this study, we first developed and evaluated a rapid recombinase polymerase amplification (RPA) detection method for FCoV that can detect FCoV within 15 min at 39 °C. The detection limit of that assay was 233 copies/μL DNA molecules per reaction. The specificity was high: it did not cross-react with canine distemper virus (CDV), canine coronavirus (CCoV), canine adenovirus (CAV), feline calicivirus (FCV), feline herpesvirus (FHV), or feline parvovirus (FPV). This assay was evaluated using 42 clinical samples (30 diarrhea samples and 12 ascites samples). The coincidence rate between FCoV-RPA and RT-qPCR for detection in clinical samples was 95.2%. In summary, FCoV-RPA analysis provides an efficient, rapid, and sensitive detection method for FCoV.     

Visual detection of white spot syndrome virus using DNA-functionalized gold nanoparticles as probes combined with loop-mediated isothermal amplification

The integration of loop-mediated isothermal amplification (LAMP) and DNA-functionalized AuNPs as visual detection probes (LAMP–AuNPs) was developed and applied for the detection of white spot syndrome virus (WSSV) from Penaeid shrimp in this study. The principle of this combination assay relies on the basis of stability characteristics of the DNA-functionalized AuNPs upon hybridization with the complementary target DNA toward salt-induced aggregation. If the detected target DNA is not complementary to the ssDNA probes, the DNA-functionalized AuNPs will be aggregated due to the screening effect of salt, resulting in the change of solution color from red to blue/gray and shift of the surface plasmon peak to longer wavelength. While the DNA-functionalized AuNPs are perfectly matched to the detected target DNA, the color of solution still remains red in color and no surface plasmon spectral shift. This assay provides simply technique, time-saving and its detection results could be achieved qualitatively and quantitatively by visualization using the naked eye due to the colorimetric change and by measurement using the UV–vis spectroscopy due to the surface plasmon spectral shift, respectively. In this study, LAMP–AuNPs assay was successfully developed with the detection of WSSV-LAMP generated product at 0.03 μg/reaction, and showed the sensitivity of 2 × 10² copies WSSV plasmid DNA, that is comparable to the most sensitive method reported to date. The LAMP–AuNPs assay described in this study revealed a highly sensitive, rapid and reliable diagnostic protocol for detection of WSSV. This technique has a potential as a routine method for assessing the infectious diseases in Penaeid shrimp not only for WSSV, but also for other shrimp pathogens, and can be useful tool in field conditions for the diagnosis or surveillance programs.     

Rapid and sensitive detection of Macrobrachium rosenbergii nodavirus in giant freshwater prawns by reverse transcription loop-mediated isothermal amplification combined with a lateral flow dipstick

Loop-mediated isothermal amplification (LAMP) allows rapid amplification of nucleic acids under isothermal conditions. It can be combined with a chromatographic lateral flow dipstick (LFD) for much more efficient, field-friendly detection of MrNV. In this work, RT-LAMP was performed at 65 °C for 40 min, followed by 5 min for hybridization with an FITC-labeled DNA probe and 5 min for LFD resulted in visualization of DNA amplicons trapped at the LFD test line. Thus, total assay time, including 10 min for rapid RNA extraction was approximately 60 min. In addition to advantages of short assay time, confirmation of amplicon identity by hybridization and elimination of electrophoresis with carcinogenic ethidium bromide, the RT-LAMP–LFD was more sensitive than an existing RT-PCR method for detection of MrNV. The RT-LAMP–LFD method gave negative test results with nucleic acid extracts from normal shrimp and from shrimp infected with other viruses including DNA viruses [PstDNV (IHHNV), PemoNPV (MBV), PmDNV (HPV), WSSV] and RNA viruses (TSV, IMNV, YHV/GAV).     

Specific detection of Angiostrongylus cantonensis in the snail Achatina fulica using a loop-mediated isothermal amplification (LAMP) assay

Angiostrongylus cantonensis, a rat lungworm, can cause eosinophilic meningitis and angiostrongyliasis in humans following ingestion of contaminated foods or intermediate/paratenic hosts with infective larvae. The snail Achatina fulica is one of the important intermediate hosts of A. cantonensis and is commonly eaten by humans in some countries. In the present study, we developed a loop-mediated isothermal amplification (LAMP) method for the specific detection of A. cantonensis in Ac. fulica. Primers for LAMP were designed based on the first internal transcribed spacer (ITS-1) of nuclear ribosomal DNA (rDNA) of A. cantonensis. Specificity tests showed that only the products of A. cantonensis were detected when DNA samples of A. cantonensis and the heterologous control samples Anisakis simplex s.s, Trichuris trichiura, Toxocara canis, Trichinella spiralis and Ascaris lumbricoides were amplified by LAMP. Sensitivity evaluation indicated that the LAMP assay is 10 times more sensitive than the conventional polymerase chain reaction (PCR) assay. The established LAMP assay is rapid, inexpensive and easy to be performed. It can be used in clinical applications for rapid and sensitive detection of A. cantonensis in snails, which has implications for the effective control of angiostrongyliasis.     

Application of recombinase polymerase amplification method for rapid detection of infectious laryngotracheitis virus

Infectious laryngotracheitis is a significant respiratory disease of chickens that causes huge economic losses due to high morbidity and mortality and reduced egg production. A real-time recombinase polymerase amplification (RPA) assay was developed to accurately detect ILTV. The specific probe and primer sets were carefully designed and screened. The real-time RPA assay was carried out at 39 °C for 30 min, and results were obtained within 15 min. The results of the specificity assay showed no fluorescence signals with other avian-related viruses. The sensitivity of the assay was 1 × 10² copies/μL. The low CV value showed that the assay was reproducible. A total of 115 clinical samples were tested using the real-time RPA assay and the real-time PCR assay in parallel; the coincidence rates of the two detection methods were 100%. The results indicated that the real-time RPA assay is a specific, sensitive, rapid, and useful tool for epidemiological studies and clinical diagnosis, especially in the field and in resource-poor areas.     

Loop mediated isothermal amplification combined with nucleic acid lateral flow strip for diagnosis of cyprinid herpes virus-3

An improved loop mediated isothermal amplification (LAMP) assay for rapid, sensitive and specific detection of cyprinid herpes virus-3 (CyHV-3), also known as koi herpes virus (KHV), was developed. The lower detection limit of the CyHV-3-LAMP assay is 10 fg DNA which equivalent to 30 copies of CyHV-3 genome. Nucleic acid lateral flow assay was used for visual detection of the LAMP products. The LAMP- nucleic acid lateral flow assay relies on DNA hybridization technology and antigen–antibody reactions in combination with LAMP. For application of this assay, the biotinylated LAMP product was hybridized with a FITC-labelled specific probe for 5 min. The resulting DNA complex could be visualised as purple band at the strip test line within 5 min of sample exposure. The nucleic acid lateral flow analysis of the LAMP product was equivalent in sensitivity but more rapid than the conventional agarose gel electrophoresis. The combination of LAMP assay with the nucleic acid lateral flow analysis can simplify the diagnosis and screening of CyHV-3 as it is simple, requires very little training, does not require specialized equipment such as a thermal cycler, the results are read visually with no need to run a gel and has a high sensitivity and specificity.     

The fluorescent probe-based recombinase-aided amplification for rapid detection of Escherichia coli O157:H7

Escherichia coli O157:H7 (E. coli O157:H7) is a common foodborne morbigenous microorganism, which can spread through fecal-oral transmission. Humans can be infected by ingesting foods and water contaminated with E. coli O157:H7, which can cause various symptoms. In present study, we have successfully developed a quick and hypersensitive fluorescent probe-based Recombinase-aided amplification (RAA) method and applied in E. coli O157:H7 detection at 39 °C in 20 min. The sensitivity of the assay in pure E. coli O157:H7 suspension was 5.6 × 10⁰ CFU/mL. The fluorescent probe-based RAA assay was further applied in three samples, and the limit of detection (LOD) in skimmed milk, lettuces and lake water was 5.4 × 10¹ CFU/mL, 7.9 × 10¹ CFU/mL and 5.2 × 10¹ CFU/mL, separately. This method showed a high sensitivity and short detection time, which has the feasible application in on-site test in real samples.