Direct detection of human herpesvirus 6 DNA in serum by the loop-mediated isothermal amplification method.

BACKGROUND: A more rapid and easier method is needed for monitoring human herpesvirus 6 (HHV-6) infections. The loop-mediated isothermal amplification method (LAMP) can detect viral DNA with high specificity, efficiency, and speed under isothermal conditions. LAMP requires only simple equipment that is available in hospital laboratories. OBJECTIVES: We evaluated LAMP as a means of detecting HHV-6 DNA directly from patients' sera. RESULTS: The sensitivity of the HHV-6 LAMP protocol without heat denaturation was 1000 copies/tube; with heat denaturation 10 copies/tube were detected. Three hundred serum samples from children with fever were analyzed. Using HHV-6 isolation as a definition of HHV-6 infection, the sensitivity, specificity, positive predictive value, and negative predictive value of the HHV-6 LAMP method without DNA extraction were 95.5%, 95.2%, 94.0%, and 96.4%, respectively. CONCLUSION: Direct detection of HHV-6 DNA in serum with a modified HHV-6 LAMP could be used for rapid diagnosis of exanthem subitum (ES).     

Detection of human herpesvirus 7 DNA by loop-mediated isothermal amplification

The reliability of loop-mediated isothermal amplification (LAMP), initially developed for the detection of human herpesvirus 7 (HHV-7), was evaluated in this study. Although a LAMP product was detected in HHV-7 DNA, neither HHV-6 nor human cytomegalovirus DNA produced a product. When agarose gel electrophoresis was used for the detection of LAMP products, the sensitivity of a 30-min HHV-7 LAMP reaction reached 250 copies/tube. The use of turbidity for the detection of the LAMP products gave a sensitivity of 500 and 250 copies/tube for 30- and 60-min reactions, respectively. Following these initial validation studies, clinical samples collected from two patients with primary HHV-7 infections were examined by HHV-7 LAMP. By use of agarose gel electrophoresis, HHV-7 LAMP products could be detected in acute-phase plasma samples but no LAMP product was detectable in convalescent-phase plasma samples from either patient. Since a turbidity assay is less sensitive than agarose gel electrophoresis, no HHV-7 LAMP product could be detected in plasma samples after a 30-min LAMP reaction. After a 60-min LAMP reaction, HHV-7 LAMP product could be detected in acute-phase plasma samples.     

Development of the loop-mediated isothermal amplification method for rapid detection of cytomegalovirus DNA

Cytomegalovirus (CMV) loop-mediated isothermal amplification (LAMP) was performed on DNA extracted from CMV (AD-169)-, herpes simplex virus (HSV) 1 (KOS)-, HSV-2 (186)-, varicella-zoster virus (Oka-vaccine)-, human herpesvirus (HHV)-6 A (U1102)-, HHV-6 B (Z29)-, and HHV-7 (RK)-infected cells. Although amplified CMV demonstrated typical ladder patterns, no LAMP product was detected in reactions performed with other viral DNAs. The sensitivity of the CMV LAMP was 500 copies/tube, as determined by either agarose gel electrophoresis or turbidity assay. To determine whether CMV LAMP could be used for quantitative analysis of viral DNA, threshold times, defined as the time (in seconds) to reach the threshold level (0.1), were measured by amplification of serial dilutions of the plasmid DNA. The standard curve exhibited a correlation coefficient of 0.944, a slope of -208.1, and a y-intercept of 3261.4. Following these initial validation experiments, we analyzed 180 samples collected serially from 20 pediatric hematopoietic stem cell transplant recipients. Detection of CMV DNA in whole blood (WB) was tested by CMV LAMP and real-time polymerase chain reaction (PCR). When >500 copies/tube (>5000 copies/200 microl of WB) was defined as positive for CMV infection, the sensitivity, specificity, positive predictive value, and negative predictive values of the CMV LAMP were 80.0, 98.9, 66.7, and 99.4%, respectively.     

Rapid detection of human herpesvirus 8 DNA using loop-mediated isothermal amplification

The reliability of a loop-mediated isothermal amplification (LAMP) method for the detection of human herpesvirus 8 (HHV-8) DNA was evaluated. Although LAMP products were produced with the DNA sample extracted from BCP-1 cells, LAMP products were not produced with the DNAs from seven other human herpesviruses. The detection limit of the HHV-8 LAMP method was 100 copies of target sequence/tube. To determine whether the HHV-8 LAMP method could be used to quantify viral DNA, threshold times, which are defined as the time (in s) it takes to reach the threshold turbidity level (0.1), were measured for the amplification of serial dilutions of a DNA plasmid containing the target sequence. The standard curve possessed a correlation coefficient of 0.9428 with a slope of -84.079 and y-intercept value of 1936.2. Additionally, an attempt was made to detect viral DNA in 17 specimens collected from Kaposi's sarcomas and two cell lines obtained from primary effusion lymphomas. HHV-8 DNA was detected in 14 of the 17 Kaposi's sarcoma tissue samples and both of the primary effusion lymphoma cell lines. Viral DNA was not detected in HHV-8 LAMP-negative samples using the real-time PCR method.     

Rapid detection of varicella-zoster virus infection by a loop-mediated isothermal amplification method

The reliability of varicella-zoster virus (VZV) loop-mediated isothermal amplification (LAMP) was evaluated for rapid diagnosis of viral infection. VZV-specific primers only amplified VZV DNA; no LAMP products were observed in reactions performed with other viral DNA templates. The specificity of this method was confirmed by two independent determinations, agarose gel electrophoresis and a turbidity assay. The sensitivity of VZV LAMP, determined by agarose gel electrophoresis, were 500 copies/tube. Detection using the turbidity assay, however, gave a sensitivity of 1,000 copies/tube. After these initial validation studies, reliability of VZV LAMP was evaluated for the detection of viral DNA in clinical specimens. Thirty-two swab samples collected from patients with vesicular skin eruptions were tested for VZV DNA. VZV was confirmed in sample numbers 10-32 by VZV real-time PCR, a previously established technique. VZV LAMP products were detected using turbidity from samples 13 to 32 (sensitivity; 87.0%, specificity; 100%, positive predictive value; 100%, negative predictive value; 75%). Although low levels of VZV DNA could be detected in the three samples exhibiting divergent results (samples numbers 10-12), no VZV LAMP product was detected in these samples, indicating a higher detection limit for this assay. Requirement of a DNA extraction step in the VZV LAMP method was examined in next experiment. The turbidity assay detected a VZV LAMP product in all of the 20 positive swab samples (samples numbers 13-32), regardless of DNA extraction.     

Loop-mediated isothermal amplification for discriminating between human herpesvirus 6 A and B

Genotyping of human herpesvirus 6 (HHV-6) is important clinically, particularly for the diagnosis of neurological diseases. The objective of this study was to establish a rapid HHV-6 genotyping method using the loop-mediated isothermal amplification (LAMP) method. An AccI site is located in the target sequence of HHV-6 B, but not in HHV-6 A. LAMP products were digested with the AccI enzyme and then separated by agarose gel electrophoresis to differentiate the digest pattern of the two variants. The fragment patterns were clearly different between HHV-6 A and B. In order to evaluate the reliability of this HHV-6 genotyping method for use in the clinical laboratory, serum samples from 20 patients with either primary HHV-6 infection or viral reactivation were collected and analyzed. HHV-6 DNA was amplified directly from the serum samples and all 20 LAMP products were positive for HHV-6 B.     

Rapid diagnosis of herpes simplex virus infection by a loop-mediated isothermal amplification method

Primers for herpes simplex virus type 1 (HSV 1)-specific loop-mediated isothermal amplification (LAMP) method amplified HSV-1 DNA, while HSV-2-specific primers amplified only HSV-2 DNA; no LAMP products were produced by reactions performed with other viral DNAs. The sensitivities of the HSV-1- and HSV-2-specific LAMP methods, determined by agarose gel electrophoresis, reached 500 and 1,000 copies/tube, respectively. The turbidity assay, however, determined the sensitivity of the HSV-1- and HSV-2-specific LAMP methods to be 1,000 and 10,000 copies/tube, respectively. After initial validation studies, 18 swab samples (in sterilized water) collected from patients with either gingivostomatitis or vesicular skin eruptions were examined. HSV-1 LAMP products were detected by agarose gel electrophoresis in the 10 samples that also demonstrated viral DNA detection by real-time PCR. Nine of these 10 samples exhibited HSV-1 LAMP products by turbidity assay. Furthermore, both the agarose gel electrophoresis and the turbidity assay directly detected HSV-1 LAMP products in 9 of the 10 swab samples collected in sterilized water. Next, we examined the reliability of HSV type-specific LAMP for the detection of viral DNA in clinical specimens (culture medium) collected from genital lesions. HSV-2 was isolated from all of the samples and visualized by either agarose gel electrophoresis or turbidity assay.     

Development of a loop-mediated isothermal amplification assay for rapid detection of BK virus

Loop-mediated isothermal amplification (LAMP) is a novel method for rapid amplification of DNA. Its advantages include rapidity and minimal equipment requirement. The LAMP assay was developed for BK virus (BKV), which is a leading cause of morbidity in renal transplant recipients. The characteristics of the assay, including its specificity and sensitivity, were evaluated. BKV LAMP was performed using various incubation times with a variety of specimens, including unprocessed urine and plasma samples. A ladder pattern on gel electrophoresis, typical of successful LAMP reactions, was observed specifically only for BKV and not for other viruses. The sensitivity of the assay with 1 h of incubation was 100 copies/tube of a cloned BKV fragment. Additionally, a positive reaction was visually ascertained by a simple color reaction using SYBR green dye. BKV LAMP was also successful for urine and plasma specimens without the need for DNA extraction. Due to its simplicity and specificity, the LAMP assay can potentially be developed for "point of care" screening of BKV.     

Detection by polymerase chain reaction amplification of human herpesvirus 6 DNA in peripheral blood of patients with exanthem subitum.

The polymerase chain reaction was used to detect human herpesvirus 6 (HHV-6) DNA in peripheral blood mononuclear cells from patients with exanthem subitum. Amplified products were detected by agarose gel electrophoresis and dot blot hybridization with a cloned DNA probe. No cross-hybridization with DNAs of five other human herpesviruses was observed in this system, and all HHV-6 strains gave positive reactions when the primer pairs were used. Immunoglobulin M antibody appeared about 5 days after the onset of disease, reaching a maximum after about 2 to 3 weeks and then decreasing to less than 1:10 1 month after the onset of disease in almost all patients. Mononuclear cells from seven patients with exanthem subitum all gave positive reactions in this system, and viral DNA was found in samples even during the convalescent phase of the disease. We conclude that this test, using polymerase chain reaction amplification, which takes only 1 to 2 days, is useful for the diagnosis of HHV-6 infection.     

Rapid and sensitive diagnosis of Acanthamoeba keratitis by loop-mediated isothermal amplification

A loop-mediated isothermal amplification (LAMP) assay was developed for the detection of Acanthamoeba. The sensitivity of the LAMP assay was tested using different copies of positive DNA. The specificity of the assay was tested using DNA extracted from Acanthamoeba, Pseudomonas aeruginosa, Candida albicans, herpes simplex virus-1 and human corneal epithelial cells. Its effectiveness was evaluated and compared with culture, corneal smear examination and real-time PCR in corneal samples from mice with Acanthamoeba keratitis. We also tested three corneal samples from patients with suspected Acanthamoeba or fungal infection using LAMP. Loop-mediated isothermal amplification was confirmed to be very sensitive, with the lowest detection limit being ten copies/tube of Acanthamoeba DNA. The LAMP primers only amplified Acanthamoeba DNA. During the development of Acanthamoeba keratitis in mice, almost all of the positive rates of LAMP at each time post-infection were higher than those of culture or corneal smear examination. The total positive rate of LAMP was significantly higher than those of culture and corneal smear examination (p <0.05), whereas the sensitivities of LAMP and real-time PCR were comparable. However, the trends of positive change in these different test methods were generally similar. Of the three clinical corneal specimens, two with suspected Acanthamoeba keratitis tested positive for Acanthamoeba using LAMP along with culture or corneal smear examination, whereas the other suspected fungal keratitis tested negative. The LAMP assay is a simple, rapid, highly specific and sensitive method for the diagnosis of keratitis caused by Acanthamoeba.     

Rapid detection of porcine circovirus type 2 by loop-mediated isothermal amplification

A method of loop-mediated isothermal amplification (LAMP) was employed to develop a rapid and simple detection system for porcine circovirus type 2 (PCV2). The amplification could be finished in 60 min under isothermal condition at 64 degrees C by employing a set of four primers targeting the cap gene of PCV2. The LAMP assay showed higher sensitivity than the conventional PCR, with a detection limit of five copies per tube of purified PCV2 genomic DNA. No cross-reactivity was observed from the samples of other related viruses including porcine circovirus type 1 (PCV1), porcine parvovirus (PPV), porcine pseudorabies virus (PRV) and porcine reproductive and respiratory syndrome virus (PRRSV). The detection rate of PCV2 LAMP for 86 clinical samples was 96.5% and appeared greater than that of the PCR method. The LAMP assay reported can provide a rapid yet simple test of PCV2 suitable for laboratory diagnosis and pen-side detection due to ease of operation and the requirement of only a regular water bath or heat block for the reaction.     

Rapid and sensitive detection of Penaeus monodon nucleopolyhedrovirus by loop-mediated isothermal amplification

Loop-mediated isothermal amplification (LAMP) is a novel, sensitive and rapid method for amplification of nucleic acids under isothermal conditions. In this report, a LAMP method was developed for detection of Penaeus monodon nucleopolyhedrovirus (PemoNPV), known previously as monodon baculovirus (MBV), using a set of six primers designed to specifically recognize the PemoNPV polyhedrin gene. The optimized time and temperature conditions for the LAMP assay were 60 min at 63 °C. The sensitivity of LAMP for PemoNPV detection was approximately 50 viral copies ng⁻¹ genomic DNA (equivalent to 150 viral copies per reaction). Using a DNA template extracted from PemoNPV-infected shrimp by a viral nucleic acid kit, the detection limit of LAMP was 0.7 fg while that of nested PCR was 70 fg; therefore, the LAMP assay was 100 times more sensitive than nested PCR. The LAMP method did not amplify a product using nucleic acid extracted from shrimp infected with other viruses including yellow head virus (YHV), Taura syndrome virus (TSV), white spot syndrome virus (WSSV), Penaeus stylirostris densovirus (PstDNV) known previously as infectious hypodermal and hematopoietic necrosis virus (IHHNV), and Penaeus monodon densovirus (PmDNV) known previously as hepatopancreatic parvovirus (HPV).     

Rapid detection of the Marek's disease viral genome in chicken feathers by loop-mediated isothermal amplification

A loop-mediated isothermal amplification (LAMP) method for the rapid detection of serotype 1 Marek's disease virus (MDV) was developed. The method used a set of three pairs of primers to amplify the MEQ gene for detecting serotype 1 MDV. The MDV LAMP method did not cross-react with serotype 2 and serotype 3, nor did the LAMP primers have binding sites for the common avian DNA viruses (reticuloendotheliosis virus, chicken anemia virus, subgroup J of the avian leukosis virus). Additionally, the assay could detect up to 10 copies of the MEQ gene in the MD viral genome, and it had 10 times higher sensitivity than the traditional PCR methods. The LAMP master mix was stable for 90 days at -20°C. Furthermore, the efficiency of LAMP for detection of serotype 1 MDV in clinical samples was comparable to those of PCR and viral isolation. The LAMP procedure is simple and does not rely on any special equipment. The detection of serotype 1 MDV by LAMP will be useful for detecting and controlling oncogenic Marek's disease.     

Sensitive and rapid detection of infectious hypodermal and hematopoietic necrosis virus (IHHNV) in shrimps by loop-mediated isothermal amplification

A method for nucleic acid amplification, loop-mediated isothermal amplification (LAMP) is a novel, sensitive and rapid technique, which can be applied for disease diagnosis in aquaculture. Using the LAMP method, a highly specific and sensitive diagnostic system for infectious hypodermal and hematopoietic necrosis virus (IHHNV) detection was designed. A set of four primers was designed by targeting the IHHNV genome DNA. By the detection system, target DNA was amplified and visualized on agarose gel within 60min under isothermal condition at 64 degrees C. Without gel electrophoresis, the LAMP amplicon was visualized directly in the reaction tube by addition of SYBR Green I for a naked-eye inspection. The LAMP reaction was also assessed by the white turbidity of magnesium pyrophosphate (a by-product of LAMP) in the tube. The assay had a detection limit of 5-500 copies of DNA template with gel electrophoresis, SYBR Green I and white turbidity with naked-eye inspection. The detection sensitivity of LAMP was 100-fold higher than the PCR. A diagnostic procedure which is rapid and highly sensitive was developed for IHHNV detection.     

A loop-mediated isothermal amplification method for rapid detection of NDM-1 gene

A loop-mediated isothermal amplification (LAMP) method was developed for the rapid and sensitive detection of the emerging resistance gene New Delhi Metallo-β-lactamase-1 (NDM-1), with its specificity and sensitivity having been evaluated. Six primers, including a pair of outer primers, a pair of inner primers, and a pair of loop primers, were specially designed for recognizing eight distinct sequences on the target NDM-1 gene. The amplification reaction was performed within only 40?min under isothermal conditions at 65°C in a regular water bath. The LAMP assay showed good specificity and higher sensitivity than the conventional polymerase chain reaction (PCR), with a detection limit of 1?pg genomic DNA per tube of one NDM-1-positive reference strain. The detection result for the 345 clinical samples showed 100% consistence with the result by the PCR method, and three contaminated samples could be detected correctly by LAMP assays, while they could not be detected by PCR. The LAMP method reported here demonstrated a potential and valuable means for detection of the NDM-1 gene: easy, rapid, visual, specific, accurate, and sensitive, especially useful for on-the-spot investigation.     

Comparison of loop-mediated isothermal amplification, real-time PCR, and virus isolation for the detection of herpes simplex virus in genital lesions

This study compares herpes simplex virus (HSV) type-specific loop-mediated isothermal amplification (LAMP) with virus isolation and real-time PCR. Genital tract specimens were obtained from 25 patients with genital lesions; two swab samples were collected from the vulva and cervix of each patient, for a total of 50 specimens. After culturing, 10 of 50 (20%) samples were positive for HSV-1 and 12 of 50 (24%) samples were positive for HSV-2. None of the patients excreted both HSV-1 and HSV-2 virus. An original HSV type-specific LAMP assay (30 min reaction) was compared with virus isolation and HSV type-specific real-time PCR. Viral DNA was detected by LAMP in 9 of 10 HSV-1 isolated samples and 11 of 12 HSV-2 isolated samples. No viral DNA was detected in samples without virus isolation. Thus, if virus isolation was used as the standard method, the LAMP protocol was highly sensitive and specific. In comparing LAMP to real-time PCR, viral DNA was detected by the LAMP method in 9 of 12 HSV-1 DNA positive samples and 11 of 18 HSV-2 DNA positive samples. If real-time PCR was used as the standard method, then, sensitivity of the LAMP method (in particular, for HSV-2) was low. Taking this into consideration, the LAMP reaction was extended to 60 min. This led to an increase in sensitivity, resulting in an additional one and three samples testing positive for HSV-1 LAMP and HSV-2 LAMP, respectively, compared to the original LAMP protocol. Therefore, the sensitivity of the LAMP method increased to about 80%.     

Discriminating between varicella-zoster virus vaccine and wild-type strains by loop-mediated isothermal amplification

The loop-mediated isothermal amplification (LAMP) method was developed to distinguish between the varicella-zoster virus (VZV) vaccine (vOka) strain and wild-type strains. Two single nucleotide polymorphisms (SNPs) (nucleotide [nt] 105705 for VR-1 VZV LAMP and nt 106262 for VR-2 VZV LAMP) located in the open reading frame 62 gene were selected as LAMP targets. Amplified vOka DNA demonstrated a typical ladder pattern; however, no LAMP product was detected in reactions performed with DNAs from other human herpesviruses by either VR-1 VZV LAMP or VR-2 VZV LAMP. This result was confirmed by a turbidity assay. The sensitivities of both VR-1 and VR-2 VZV LAMP determined by either the turbidity assay or agarose gel electrophoresis were 100 copies per reaction. To discriminate the vOka strain from wild-type strains, VR-1 and VR-2 VZV LAMP products were digested with the appropriate restriction enzymes (SacII for VR-1 LAMP and SmaI for VR-2 LAMP). The digested products were clearly different in the vOka strain and wild-type strains. To evaluate the utility of the LAMP methods for rapid differentiation, viral DNA (without DNA extraction) in swab samples was directly tested. Wild-type VZV DNA was detected in 20 swab samples by either VR-1 VZV LAMP or VR-2 VZV LAMP. Sequence analysis confirmed the expected SNPs in the LAMP products amplified from the vOka strain and the five wild-type strains.     

Loop-mediated isothermal amplification assay for the diagnosis of retinitis caused by herpes simplex virus-1

A loop-mediated isothermal amplification (LAMP) assay was developed for the detection of herpes simplex virus 1 (HSV-1). The specificity of the assay was tested using DNA extracted from HSV-1-infected rabbit corneal epithelium cultures, HSV-2 grown on Vero cell line, cytomegalovirus (CMV) (AD-169), varicella zoster virus (VZV) (Oka-vaccine), adenovirus, Aspergillus flavus and Staphylococcus aureus. The specificity of LAMP was confirmed by bidirectional sequencing of the amplicons. The sensitivity of the LAMP assay was tested using different concentrations of HSV-1 DNA. To evaluate the application of the LAMP assay in clinical diagnosis, we tested vitreous samples from 20 patients with suspected viral retinitis using LAMP and real-time PCR for HSV-1. The LAMP primers amplified only HSV-1 DNA; no LAMP products were detected with the DNAs of HSV-2, CMV, VZV, adenovirus A. flavus and S. aureus. The sequences of the positive HSV-1 LAMP products perfectly (99–100%) matched the HSV-1 sequences deposited in the GenBank database. LAMP is as sensitive as real-time PCR, with the lowest detection limit being 10 copies/μL of HSV-1 DNA. Of the 20 patients with suspected viral retinitis, four tested positive for HSV-1 using real- time PCR and LAMP. A 100% concordance was observed across the two methods. The LAMP assay is a rapid, highly specific and sensitive method for the diagnosis of retinitis caused by HSV-1.     

Rapid detection of Epstein-Barr virus DNA by loop-mediated isothermal amplification method.

BACKGROUND: The loop-mediated isothermal amplification (LAMP) method is a novel technique for the amplification of specific DNA sequences. OBJECTIVES: To establish the LAMP method for amplifying Epstein-Barr virus (EBV) DNA and to examine its reliability for the detection of EBV DNA in clinical specimens. STUDY DESIGN: Sera from 108 patients, who were initially suspected of primary EBV infection, were tested by the EBV LAMP method, and the results were compared with those of the real-time PCR assay. Serological examination was regarded as the standard diagnostic method. RESULTS: To diagnose primary EBV infection, the sensitivity of LAMP was 86.4% and the specificity was 100%. The sensitivity of the real-time PCR assay was 84.1% and the specificity was 98.4%. Longitudinal analysis showed that the detection rate of EBV DNA in serum by the LAMP method decreased with time in accordance with the decrease of the EBV load. EBV DNA could not be detected in serum 40 days after onset of symptoms. CONCLUSIONS: These results indicate that the sensitivity and specificity of the LAMP method are comparable to those of real-time PCR and that detecting EBV DNA in serum by this method is potentially useful for diagnosing primary EBV infection.