HR-pQCT Measures of Bone Microarchitecture Predict Fracture: Systematic Review and Meta-Analysis

High-resolution peripheral quantitative computed tomography (HR-pQCT) is a noninvasive imaging modality for assessing volumetric bone mineral density (vBMD) and microarchitecture of cancellous and cortical bone. The objective was to (1) assess fracture-associated differences in HR-pQCT bone parameters; and (2) to determine if HR-pQCT is sufficiently precise to reliably detect these differences in individuals. We systematically identified 40 studies that used HR-pQCT (39/40 used XtremeCT scanners) to assess 1291 to 3253 and 3389 to 10,687 individuals with and without fractures, respectively, ranging in age from 10.9 to 84.7 years with no comorbid conditions. Parameters describing radial and tibial bone density, microarchitecture, and strength were extracted and percentage differences between fracture and control subjects were estimated using a random effects meta-analysis. An additional meta-analysis of short-term in vivo reproducibility of bone parameters assessed by XtremeCT was conducted to determine whether fracture-associated differences exceeded the least significant change (LSC) required to discern measured differences from precision error. Radial and tibial HR-pQCT parameters, including failure load, were significantly altered in fracture subjects, with differences ranging from −2.6% (95% confidence interval [CI] −3.4 to −1.9) in radial cortical vBMD to −12.6% (95% CI −15.0 to −10.3) in radial trabecular vBMD. Fracture-associated differences reported by prospective studies were consistent with those from retrospective studies, indicating that HR-pQCT can predict incident fracture. Assessment of study quality, heterogeneity, and publication biases verified the validity of these findings. Finally, we demonstrated that fracture-associated deficits in total and trabecular vBMD and certain tibial cortical parameters can be reliably discerned from HR-pQCT-related precision error and can be used to detect fracture-associated differences in individual patients. Although differences in other HR-pQCT measures, including failure load, were significantly associated with fracture, improved reproducibility is needed to ensure reliable individual cross-sectional screening and longitudinal monitoring. In conclusion, our study supports the use of HR-pQCT in clinical fracture prediction. © 2019 American Society for Bone and Mineral Research.     

Sex- and Site-Specific Reference Data for Bone Microarchitecture in Adults Measured Using Second-Generation HR-pQCT

There are currently no population-based reference data sets available for volumetric bone mineral density and microarchitecture parameters measured using the second-generation high-resolution peripheral quantitative computed tomography (HR-pQCT), yet the technology is rapidly becoming a standard for studies of bone microarchitecture. Although cross-calibrated data sets from the first-generation HR-pQCT have been reported, they are not suitable for second-generation bone microarchitecture properties because of fundamental differences between scanner generations. This study provides site- and sex-specific centile curves across the adult life span for second-generation HR-pQCT properties. A total of 1236 adult participants (768 female and 468 male) from the Calgary area between the ages of 18 and 90 years were scanned at the distal tibia and radius using the second-generation HR-pQCT. Bone densities, microarchitectural properties, and failure load estimated using finite element analysis were determined using standard in vivo protocol. Site- and sex-specific centile curves were generated using the generalized additive models for location, scale, and shape (GAMLSS) method. These data provide reference curves appropriate for predominantly white male and female adults, which can be used as a tool to assess patient- or cohort-specific bone health. © 2020 American Society for Bone and Mineral Research.     

Lower trabecular volumetric BMD at metaphyseal regions of weight‐bearing bones is associated with prior fracture in young girls

Understanding the etiology of skeletal fragility during growth is critical for the development of treatments and prevention strategies aimed at reducing the burden of childhood fractures. Thus we evaluated the relationship between prior fracture and bone parameters in young girls. Data from 465 girls aged 8 to 13 years from the Jump‐In: Building Better Bones study were analyzed. Bone parameters were assessed at metaphyseal and diaphyseal sites of the nondominant femur and tibia using peripheral quantitative computed tomography (pQCT). Dual‐energy X‐ray absorptiometry (DXA) was used to assess femur, tibia, lumbar spine, and total body less head bone mineral content. Binary logistic regression was used to evaluate the relationship between prior fracture and bone parameters, controlling for maturity, body mass, leg length, ethnicity, and physical activity. Associations between prior fracture and all DXA and pQCT bone parameters at diaphyseal sites were nonsignificant. In contrast, lower trabecular volumetric BMD (vBMD) at distal metaphyseal sites of the femur and tibia was significantly associated with prior fracture. After adjustment for covariates, every SD decrease in trabecular vBMD at metaphyseal sites of the distal femur and tibia was associated with 1.4 (1.1–1.9) and 1.3 (1.0–1.7) times higher fracture prevalence, respectively. Prior fracture was not associated with metaphyseal bone size (ie, periosteal circumference). In conclusion, fractures in girls are associated with lower trabecular vBMD, but not bone size, at metaphyseal sites of the femur and tibia. Lower trabecular vBMD at metaphyseal sites of long bones may be an early marker of skeletal fragility in girls. © 2011 American Society for Bone and Mineral Research.     

Contribution of high resolution peripheral quantitative CT to the management of bone and joint diseases

Many imaging modalities have been described to diagnose and monitor osteoporosis (OP), osteoarthritis and inflammatory rheumatic diseases. Over the last ten years, High Resolution peripheral Quantitative Computerized Tomography (HR-pQCT) was shown to be a precise and non invasive technique to study bone and joint diseases in clinical research. It allows the study of both cortical and trabecular bone microarchitecture at the distal tibia and radius, and further applications have been developed such as the study of mechanical properties by the finite element analysis. Thus, in case-control and cross-sectional studies, microarchitecture parameters discriminated fractured individuals independently of areal BMD. Also, microstructure parameters can predict incident fracture in postmenopausal women. In metabolic diseases associated with bone fragility, HR-pQCT may also be used to explore bone changes. In joint disease studies, HR-pQCT was a remarkable tool to assess bone erosion and joint space narrowing at the hand. This article gives an overview of this imaging technique.     

Bone Geometry,Density, Microstructure,and Biomechanical Properties in the Distal Tibia in Patients With Primary Hypertrophic Osteoarthropathy Assessed by Second-Generation High-Resolution Peripheral Quantitative Computed Tomography

Periosteosis refers to pathological woven bone formation beneath the cortical bone of the long bones. It is an imaging hallmark of primary hypertrophic osteoarthropathy (PHO) and also considered as one of the major diagnostic criteria of PHO patients. Up to date, detailed information on bone quality changes in long bones of PHO patients is still missing. This study aimed to evaluate bone microarchitecture and bone strength in PHO patients by using high-resolution peripheral quantitative computed tomography (HR-pQCT). The study comprised 20 male PHO patients with the average age of 27.0 years and 20 age- and sex-matched healthy controls. The areal bone mineral density (aBMD) was assessed at the lumbar spine (L₁–L₄) and hip (total hip and femoral neck) by dual-energy X-ray absorptiometry (DXA). Bone geometry, volumetric bone mineral density (vBMD), and microstructure parameters at the distal tibia were evaluated by using HR-pQCT. Bone strength was evaluated by finite element analysis (FEA) based on HR-pQCT screening at distal tibia. Urinary prostaglandin E₂ (PGE₂), serum phosphatase (ALP), beta-C-telopeptides of type I collagen (β-CTX), soluble receptor activator of nuclear factor-κB ligand (sRANKL), osteoprotegerin (OPG), and neuronal calcitonin gene-related peptide (CGRP) were investigated. As compared with healthy controls, PHO patients had larger bone cross-sectional areas; lower total, trabecular, and cortical vBMD; compromised bone microstructures with more porous cortices, thinned trabeculae, reduced trabecular connectivity, and relatively more significant resorption of rod-like trabeculae at distal tibia. The apparent Young's modulus was significantly lower in PHO patients. The concentration of PGE₂, biomarkers of bone resorption (β-CTX and sRANKL/OPG ratio), and the neuropeptide CGRP were higher in PHO patients versus healthy controls. PGE₂ level correlated negatively with vBMD and estimated bone strength and positively with bone geometry at distal tibia. The present HR-pQCT study is the first one illustrating the microarchitecture and bone strength features in long bones. © 2021 American Society for Bone and Mineral Research (ASBMR).     

High-Resolution Peripheral Quantitative Computed Tomography for the Assessment of Bone Strength and Structure: A Review by the Canadian Bone Strength Working Group

Bone structure is an integral determinant of bone strength. The availability of high resolution peripheral quantitative computed tomography (HR-pQCT) has made it possible to measure three-dimensional bone microarchitecture and volumetric bone mineral density in vivo, with accuracy previously unachievable and with relatively low-dose radiation. Recent studies using this novel imaging tool have increased our understanding of age-related changes and sex differences in bone microarchitecture, as well as the effect of different pharmacological therapies. One advantage of this novel tool is the use of finite element analysis modelling to non-invasively estimate bone strength and predict fractures using reconstructed three-dimensional images. In this paper, we describe the strengths and limitations of HR-pQCT and review the clinical studies using this tool.     

Cross‐sectional analysis of the association between fragility fractures and bone microarchitecture in older men: The STRAMBO study

Areal bone mineral density (aBMD) measured by dual‐energy X‐ray absorptiometry (DXA) identifies 20% of men who will sustain fragility fractures. Thus we need better fracture predictors in men. We assessed the association between the low‐trauma prevalent fractures and bone microarchitecture assessed at the distal radius and tibia by high‐resolution peripheral quantitative computed tomography (HR‐pQCT) in 920 men aged 50 years of older. Ninety‐eight men had vertebral fractures identified on the vertebral fracture assessment software of the Hologic Discovery A device using the semiquantitative criteria, whereas 100 men reported low‐trauma peripheral fractures. Men with vertebral fractures had poor bone microarchitecture. However, in the men with vertebral fractures, only cortical volumetric density (D.cort) and cortical thickness (C.Th) remained significantly lower at both the radius and tibia after adjustment for aBMD of ultradistal radius and hip, respectively. Low D.cort and C.Th were associated with higher prevalence of vertebral fractures regardless of aBMD. Severe vertebral fractures also were associated with poor trabecular microarchitecture regardless of aBMD. Men with peripheral fractures had poor bone microarchitecture. However, after adjustment for aBMD, all microarchitectural parameters became nonsignificant. In 15 men with multiple peripheral fractures, trabecular spacing and distribution remained increased after adjustment for aBMD. Thus, in men, vertebral fractures and their severity are associated with impaired cortical bone, even after adjustment for aBMD. The association between peripheral fractures and bone microarchitecture was weaker and nonsignificant after adjustment for aBMD. Thus bone microarchitecture may be a determinant of bone fragility in men, which should be investigated in prospective studies. © 2011 American Society for Bone and Mineral Research.     

Impaired bone microarchitecture and strength in patients with tumor-induced osteomalacia

Some studies based on bone biopsy have demonstrated that in patients with tumor-induced osteomalacia (TIO) the mineralization process of the bone matrix is profoundly disturbed. However, the interrelationship between clinical and biochemical features and bone microarchitecture in this disease needs further analysis. With this purpose in mind, we set out three objectives: (i) to determine bone microarchitecture and estimated bone strength in a group of patients with tumor-induced osteomalacia using high-resolution peripheral quantitative computed tomography (HR-pQCT) and finite element analysis (FEA), (ii) to investigate correlations between duration of disease, biochemical features, bone density, HR-pQCT and FEA parameters, and (iii) to compare HR-pQCT and FEA parameters with a healthy control group. Ten patients with TIO were included. All patients had non-resolved disease. At the distal radius, all bone microarchitecture parameters were significantly affected in patients with TIO in comparison with healthy controls. At the distal tibia, all parameters were significantly impaired, except for trabecular thickness. All the parameters were more affected in the distal tibia than in the distal radius. Women with TIO (n = 7) had significantly lower bone strength parameters than healthy controls. In men (n = 3), bone strength parameters were significantly lower than in the control group at the distal tibia. Alkaline phosphatase levels exhibited a negative correlation with microarchitecture parameters, failure load, and stiffness. Higher levels of parathyroid hormone correlated with poorer microarchitecture parameters. We believe that in TIO, hormonal disturbances and the lack of mechanical stimulus specially converge to generate an extremely harmful combination for bone health. © 2021 American Society for Bone and Mineral Research (ASBMR).     

Age-, Site-, and Sex-Specific Normative Centile Curves for HR-pQCT-Derived Microarchitectural and Bone Strength Parameters in a Chinese Mainland Population

High-resolution peripheral quantitative computed tomography (HR-pQCT) is an advanced 3D imaging technology that has the potential to contribute to fracture risk assessment and early diagnosis of osteoporosis. However, to date no studies have sought to establish normative reference ranges for HR-pQCT measures among individuals from the Chinese mainland, significantly restricting its use. In this study, we collected HR-pQCT scans from 863 healthy Chinese men and women aged 20 to 80 years using the latest-generation scanner (Scanco XtremeCT II, Scanco Medical AG, Brüttisellen, Switzerland). Parameters including volumetric bone mineral density, bone geometry, bone microarchitecture, and bone strength were evaluated. Age-, site-, and sex-specific centile curves were established using generalized additive models for location, scale, and shape with age as the only explanatory variable. Based on established models, age-related variations for different parameters were also quantified. For clinical purposes, the expected values of HR-pQCT parameters for a defined age and a defined percentile or Z-score were provided. We found that the majority of trabecular and bone strength parameters reached their peak at 20 years of age, regardless of sex and site, then declined steadily thereafter. However, most of the cortical bone loss was observed after the age of 50 years. Among the measures, cortical porosity changed most dramatically, and overall, changes were more notable at the radius than the tibia and among women compared with men. Establishing such normative HR-pQCT reference data will provide an important basis for clinical and research applications in mainland China aimed at elucidating microstructural bone damage driven by different disease states or nutritional status. © 2020 American Society for Bone and Mineral Research.     

Alterations of cortical and trabecular architecture are associated with fractures in postmenopausal women, partially independent of decreased BMD measured by DXA: the OFELY study.

We assessed the role of low aBMD and impaired architecture-assessed by an HR-pQCT system-in a case-control study of postmenopausal women with fractures. Vertebral and nonvertebral fractures are associated with low volumetric BMD and architectural alterations of trabecular and cortical bone, independent of aBMD assessed by DXA. INTRODUCTION: Alterations of bone architecture and low BMD both contribute to skeletal fragility, but the contribution of cortical and trabecular architecture, independently of areal BMD (aBMD), to the risk of fracture in postmenopausal women has not been thoroughly evaluated. We assessed the role of impaired architecture and low BMD in postmenopausal women with fractures. MATERIALS AND METHODS: A matched case-control study in women from the OFELY cohort was performed after 13 years of follow-up. One hundred one women (mean, 73.7+/-8 years) who sustained a fragility fracture during the follow-up of the study were age-matched with one control who never had a fracture. Density and architecture at the distal radius and tibia were measured with high-resolution pQCT (HR-pQCT) using an XTreme CT (Scanco Medical AG, Bassersdorf, Switzerland). aBMD at the total hip and ultradistal radius was measured by DXA. RESULTS: There were 80 peripheral fractures in 72 women, 44 vertebral fractures in 34 women, and both types of fractures in 5 women over the 14 years of follow-up. At the distal radius, women with fractures had lower volumetric total (D tot) and trabecular (D trab) BMDs, BV/TV, cortical thickness (Cort Th), trabecular number (TbN), and trabecular thickness (TbTh) and higher trabecular separation (TbSp) and distribution of trabecular separation (TbSpSd) than controls without fractures. In a logistic model, each SD decrease of volumetric total and trabecular densities was associated with a significantly increased risk of fracture at both sites (ORs ranged from 2.00 to 2.47). After adjusting for aBMD measured by DXA at the ultradistal radius, differences between cases and controls remained significant for D trab, and there was a similar trend for TbN, TbSp, and TbSpSd, with adjusted ORs ranging from 1.32 to 1.50. At the distal tibia, before and after adjusting for total hip aBMD, differences between cases and controls remained significant for D tot, D trab, Cort Th, and TbTh, with adjusted ORs ranging from 1.80 to 2.09. CONCLUSIONS: In postmenopausal women, vertebral and nonvertebral fractures are associated with low volumetric BMD and architectural alterations of trabecular and cortical bone that can be assessed noninvasively and that are partially independent of aBMD assessed by DXA.     

Women with previous fragility fractures can be classified based on bone microarchitecture and finite element analysis measured with HR-pQCT

Summary

High-resolution peripheral quantitative computed tomography (HR-pQCT) measurements of distal radius and tibia bone microarchitecture and finite element (FE) estimates of bone strength performed well at classifying postmenopausal women with and without previous fracture. The HR-pQCT measurements outperformed dual energy x-ray absorptiometry (DXA) at classifying forearm fractures and fractures at other skeletal sites.

Introduction

Areal bone mineral density (aBMD) is the primary measurement used to assess osteoporosis and fracture risk; however, it does not take into account bone microarchitecture, which also contributes to bone strength. Thus, our objective was to determine if bone microarchitecture measured with HR-pQCT and FE estimates of bone strength could classify women with and without low-trauma fractures.

Methods

We used HR-pQCT to assess bone microarchitecture at the distal radius and tibia in 44 postmenopausal women with a history of low-trauma fracture and 88 age-matched controls from the Calgary cohort of the Canadian Multicentre Osteoporosis Study (CaMos) study. We estimated bone strength using FE analysis and simulated distal radius aBMD from the HR-pQCT scans. Femoral neck (FN) and lumbar spine (LS) aBMD were measured with DXA. We used support vector machines (SVM) and a tenfold cross-validation to classify the fracture cases and controls and to determine accuracy.

Results

The combination of HR-pQCT measures of microarchitecture and FE estimates of bone strength had the highest area under the receiver operating characteristic (ROC) curve of 0.82 when classifying forearm fractures compared to an area under the curve (AUC) of 0.71 from DXA-derived aBMD of the forearm and 0.63 from FN and spine DXA. For all fracture types, FE estimates of bone strength at the forearm alone resulted in an AUC of 0.69.

Conclusion

Models based on HR-pQCT measurements of bone microarchitecture and estimates of bone strength performed better than DXA-derived aBMD at classifying women with and without prior fracture. In future, these models may improve prediction of individuals at risk of low-trauma fracture.     

Bone Microarchitecture Phenotypes Identified in Older Adults Are Associated With Different Levels of Osteoporotic Fracture Risk

Prevalence of osteoporosis is more than 50% in older adults, yet current clinical methods for diagnosis that rely on areal bone mineral density (aBMD) fail to detect most individuals who have a fragility fracture. Bone fragility can manifest in different forms, and a “one-size-fits-all” approach to diagnosis and management of osteoporosis may not be suitable. High-resolution peripheral quantitative computed tomography (HR-pQCT) provides additive information by capturing information about volumetric density and microarchitecture, but interpretation is challenging because of the complex interactions between the numerous properties measured. In this study, we propose that there are common combinations of bone properties, referred to as phenotypes, that are predisposed to different levels of fracture risk. Using HR-pQCT data from a multinational cohort (n = 5873, 71% female) between 40 and 96 years of age, we employed fuzzy c-means clustering, an unsupervised machine-learning method, to identify phenotypes of bone microarchitecture. Three clusters were identified, and using partial correlation analysis of HR-pQCT parameters, we characterized the clusters as low density, low volume, and healthy bone phenotypes. Most males were associated with the healthy bone phenotype, whereas females were more often associated with the low volume or low density bone phenotypes. Each phenotype had a significantly different cumulative hazard of major osteoporotic fracture (MOF) and of any incident osteoporotic fracture (p < 0.05). After adjustment for covariates (cohort, sex, and age), the low density followed by the low volume phenotype had the highest association with MOF (hazard ratio = 2.96 and 2.35, respectively), and significant associations were maintained when additionally adjusted for femoral neck aBMD (hazard ratio = 1.69 and 1.90, respectively). Further, within each phenotype, different imaging biomarkers of fracture were identified. These findings suggest that osteoporotic fracture risk is associated with bone phenotypes that capture key features of bone deterioration that are not distinguishable by aBMD. © 2021 American Society for Bone and Mineral Research (ASBMR).     

Alteration of Bone Density,Microarchitecture, and Strength in Patients with Camurati–Engelmann Disease: Assessed by HR-pQCT

Camurati-Engelmann disease (CED) is a rare autosomal-dominant skeletal dysplasia caused by mutations in the transforming growth factor-β1 (TGFB1) gene. In this study, a retrospective review of patients with CED evaluated at Peking Union Medical College Hospital in Beijing, China, between November 30, 2000 and November 30, 2020 was conducted. Data including demographic data, manifestations, and examination results were characterized. Furthermore, bone geometry, density, and microarchitecture were assessed and bone strength was estimated by HR-pQCT. Results showed the median age at onset was 2.5 years. Common manifestations included pain in the lower limbs (94%, 17/18), abnormal gait (89%, 16/18), genu valgum (89%, 16/18), reduced subcutaneous fat (78%, 14/18), delayed puberty (73%, 8/11), muscle weakness (67%, 12/18), hearing loss (39%, 7/18), hepatosplenomegaly (39%, 7/18), exophthalmos or impaired vision or visual field defect (33%, 6/18), and anemia (33%, 7/18). Twenty-five percent (4/16) of patients had short stature. Serum level of alkaline phosphatase was elevated in 41% (7/17) of patients whereas beta-C-terminal telopeptide was elevated in 91% of patients (10/11). Among 12 patients, the Z-scores of two patients were greater than 2.5 at the femur neck and the Z-scores of five patients were lower than −2.5 at the femur neck and/or lumbar spine. HR-pQCT results showed lower volumetric BMD (vBMD), altered bone microstructure and lower estimated bone strength at the distal radius and tibia in patients with CED compared with controls. In addition, total volume bone mineral density and cortical volumetric bone mineral density at the radius were negatively correlated with age in patients with CED, but positively correlated with age in controls. In conclusion, the largest case series of CED with characterized clinical features in a Chinese population was reported here. In addition, HR-pQCT was used to investigate bone microstructure at the distal radius and tibia in nine patients with CED, and the alteration of bone density, microstructure, and strength was shown for the first time. © 2021 American Society for Bone and Mineral Research (ASBMR).     

Bone Geometry,Density, and Microarchitecture in the Distal Radius and Tibia in Adults With Marfan Syndrome Assessed by HR-pQCT

Marfan syndrome (MFS) is a hereditary disorder of connective tissue caused by mutations in the fibrillin-1 gene. Studies have shown that patients with MFS have lower bone mass, but little is known about the other constituents of bone strength. We hypothesize that patients with MFS will have larger bone area and compromised cortical microarchitecture compared with non-MFS individuals. A total of 74 adult patients with MFS and 145 age- and sex-matched non-MFS reference individuals were included in this study. High-resolution peripheral quantitative computed tomography (HR-pQCT) at the distal radius and distal tibia and dual-energy X-ray absorptiometry of total hip and the lumbar spine were performed, and bone turnover and sex hormones were measured. Patients with MFS had significantly lower areal bone mineral density (BMD) at the total spine (−13%) and total hip (−7%) when compared with the reference group. Patients with MFS had significantly larger total bone area at both the radius (+27%) and tibia (+34%). Volumetric BMD at both measured sites showed significantly reduced total, trabecular, and cortical volumetric BMD in patients with MFS compared with the reference group. The microarchitectural parameters at the radius and tibia were compromised in patients with MFS with significantly reduced trabecular number and thickness, leading to a higher trabecular separation and significantly reduced cortical thickness and increased cortical porosity compared with the reference group. The differences in bone density, geometry, or microarchitecture were not explained by increased bone turnover markers or circulating levels of sex hormones. We conclude patients with MFS have altered bone geometry, altered bone microstructure, and lower bone mass (lower areal BMD and volumetric BMD at all sites) compared with healthy reference individuals. Future studies should focus on fracture rates and fracture risk in adult and aging patients with MFS. © 2020 American Society for Bone and Mineral Research (ASBMR).     

Adipose tissue and volumetric bone mineral density of older Afro‐Caribbean men

Although low body weight is a risk factor for osteoporosis‐related fractures, conflicting data exist for the association between adiposity and bone mineral density (BMD). Studies examining these relationships have measured body fat and BMD with dual‐energy X‐ray absorptiometry (DXA), which cannot distinguish subcutaneous adipose tissue area (SAT) from total adiposity or trabecular from cortical bone. To investigate the relationship between adiposity and BMD further, we analyzed body composition and adipose tissue distribution by quantitative computed tomography (QCT) in 1829 Afro‐Caribbean men aged 40 years and older from a population‐based sample. Cortical volumetric BMD, muscle cross‐sectional area, total adipose tissue area (TAT), and percentage SAT were measured at the proximal tibia. Trabecular volumetric BMD was measured at the distal tibia. We used analysis of covariance to test for associations between quartile of the adipose tissue measures and BMD, adjusting for anthropometric, health, and lifestyle factors. Higher TAT was associated with lower cortical BMD in both unadjusted and adjusted models (p < .001). Men with a higher percentage SAT had greater cortical BMD (p < .001). Similar associations were seen between percent SAT and trabecular BMD at the distal tibia. These results indicate that total adiposity is a potentially important correlate of bone mass in older men and that different fat depots may have opposing associations with bone mass. Additional research is needed to better understand the mechanisms underlying the relationship between body fat distribution and bone mass. © 2010 American Society for Bone and Mineral Research.     

What is the future of patient-specific vertebral fracture prediction?

This paper aims to introduce a few alternative methodologies for prediction of vertebral fractures, the most common type being fragility fracture in the elderly. Current methods, such as DXA, for diagnosing osteoporosis and predicting the risk of vertebral failure, are often not accurate thereby preventing those patients at risk from receiving adequate treatment. Robust fracture prediction models for vertebral fracture risk should not only include BMD, as measured by DXA, but should incorporate a wide range of factors including bone geometry, bone mineral distribution within the vertebral body, daily living activities, and spine musculature. One promising technique is finite element modeling, which has been developed over the past several decades and implements clinical imaging, such as quantitative computed tomography (QCT), and engineering fundamentals to more accurately predict the risk of fracture. Other imaging tools that assess bone mineral distribution and structure at the microscopic level include micro-CT or high-resolution peripheral QCT (HR-pQCT). These newer techniques hold the promise of more accurate diagnosis of osteoporosis and those at risk for vertebral insufficiency fractures before they occur.     

Increased cortical porosity in type 2 diabetic postmenopausal women with fragility fractures

The primary goal of this study was to assess peripheral bone microarchitecture and strength in postmenopausal women with type 2 diabetes with fragility fractures (DMFx) and to compare them with postmenopausal women with type 2 diabetics without fractures (DM). Secondary goals were to assess differences in nondiabetic postmenopausal women with fragility fractures (Fx) and nondiabetic postmenopausal women without fragility fractures (Co), and in DM and Co women. Eighty women (mean age 61.3 ± 5.7 years) were recruited into these four groups (DMFx, DM, Fx, and Co; n = 20 per group). Participants underwent dual‐energy X‐ray absorptiometry (DXA) and high‐resolution peripheral quantitative computed tomography (HR‐pQCT) of the ultradistal and distal radius and tibia. In the HR‐pQCT images volumetric bone mineral density and cortical and trabecular structure measures, including cortical porosity, were calculated. Bone strength was estimated using micro–finite element analysis (µFEA). Differential strength estimates were obtained with and without open cortical pores. At the ultradistal and distal tibia, DMFx had greater intracortical pore volume (+52.6%, p = 0.009; +95.4%, p = 0.020), relative porosity (+58.1%, p = 0.005; +87.9%, p = 0.011) and endocortical bone surface (+10.9%, p = 0.031; +11.5%, p = 0.019) than DM. At the distal radius DMFx had 4.7‐fold greater relative porosity (p < 0.0001) than DM. At the ultradistal radius, intracortical pore volume was significantly higher in DMFx than DM (+67.8%, p = 0.018). DMFx also displayed larger trabecular heterogeneity (ultradistal radius: +36.8%, p = 0.035), and lower total and cortical BMD (ultradistal tibia: ?12.6%, p = 0.031; ?6.8%, p = 0.011) than DM. DMFx exhibited significantly higher pore‐related deficits in stiffness, failure load, and cortical load fraction at the ultradistal and distal tibia, and the distal radius than DM. Comparing nondiabetic Fx and Co, we only found a nonsignificant trend with increase in pore volume (+38.9%, p = 0.060) at the ultradistal radius. The results of our study suggest that severe deficits in cortical bone quality are responsible for fragility fractures in postmenopausal diabetic women. © 2013 American Society for Bone and Mineral Research     

Bone Microarchitecture Assessed by HR‐pQCT as Predictor of Fracture Risk in Postmenopausal Women: The OFELY Study

Several cross‐sectional studies have shown that impairment of bone microarchitecture contributes to skeletal fragility. The aim of this study was to prospectively investigate the prediction of fracture (Fx) by bone microarchitecture assessed by high‐resolution peripheral computed tomography (HR‐ pQCT) in postmenopausal women. We measured microarchitecture at the distal radius and tibia with HR‐pQCT in the OFELY study, in addition to areal BMD with dual‐energy X‐ray absorptiometry (DXA) in 589 women, mean ± SD age 68 ± 9 years. During a median [IQ] 9.4 [1.0] years of follow‐up, 135 women sustained an incident fragility Fx, including 81 women with a major osteoporotic Fx (MOP Fx). After adjustment for age, women who sustained Fx had significantly lower total and trabecular volumetric densities (vBMD) at both sites, cortical parameters (area and thickness at the radius, vBMD at the tibia), trabecular number (Tb.N), connectivity density (Conn.D), stiffness, and estimated failure load at both sites, compared with control women. After adjustment for age, current smoking, falls, prior Fx, use of osteoporosis‐related drugs, and total hip BMD, each quartile decrease of several baseline values of bone microarchitecture at the radius was associated with significant change of the risk of Fx (HR of 1.39 for Tb.BMD [p = 0.001], 1.32 for Tb.N [p = 0.01], 0.76 for Tb.Sp.SD [p = 0.01], 1.49 [p = 0.01] for Conn.D, and 1.27 for stiffness [p = 0.02]). At the tibia, the association remained significant for stiffness and failure load in the multivariate model for all fragility Fx and for Tt.BMD, stiffness, and failure load for MOP Fx. We conclude that impairment of bone microarchitecture—essentially in the trabecular compartment of the radius—predict the occurrence of incident fracture in postmenopausal women. This assessment may play an important role in identifying women at high risk of fracture who could not be adequately detected by BMD measurement alone, to benefit from a therapeutic intervention. © 2017 American Society for Bone and Mineral Research.     

Skeletal Structure in Postmenopausal Women With Osteopenia and Fractures Is Characterized by Abnormal Trabecular Plates and Cortical Thinning

The majority of fragility fractures occur in women with osteopenia rather than osteoporosis as determined by dual‐energy X‐ray absorptiometry (DXA). However, it is difficult to identify which women with osteopenia are at greatest risk. We performed this study to determine whether osteopenic women with and without fractures had differences in trabecular morphology and biomechanical properties of bone. We hypothesized that women with fractures would have fewer trabecular plates, less trabecular connectivity, and lower stiffness. We enrolled 117 postmenopausal women with osteopenia by DXA (mean age 66 years; 58 with fragility fractures and 59 nonfractured controls). All had areal bone mineral density (aBMD) measured by DXA. Trabecular and cortical volumetric bone mineral density (vBMD), trabecular microarchitecture, and cortical porosity were measured by high‐resolution peripheral computed tomography (HR‐pQCT) of the distal radius and tibia. HR‐pQCT scans were subjected to finite element analysis to estimate whole bone stiffness and individual trabecula segmentation (ITS) to evaluate trabecular type (as plate or rod), orientation, and connectivity. Groups had similar age, race, body mass index (BMI), and mean T‐scores. Fracture subjects had lower cortical and trabecular vBMD, thinner cortices, and thinner, more widely separated trabeculae. By ITS, fracture subjects had fewer trabecular plates, less axially aligned trabeculae, and less trabecular connectivity. Whole bone stiffness was lower in women with fractures. Cortical porosity did not differ. Differences in cortical bone were found at both sites, whereas trabecular differences were more pronounced at the radius. In summary, postmenopausal women with osteopenia and fractures had lower cortical and trabecular vBMD; thinner, more widely separated and rodlike trabecular structure; less trabecular connectivity; and lower whole bone stiffness compared with controls, despite similar aBMD by DXA. Our results suggest that in addition to trabecular and cortical bone loss, changes in plate and rod structure may be important mechanisms of fracture in postmenopausal women with osteopenia. © 2014 American Society for Bone and Mineral Research.