Metathetic Selective Degradation of Polyisoprene: Low‐Molecular‐Weight Telechelic Oligomer Obtained from Both Synthetic and Natural Rubber

Summary: Degradation studies of cis‐1,4‐polyisoprene were carried out using first and second generation Grubbs catalysts to achieve end‐functionalized acetoxy oligomers in both an organic solvent and a latex phase at room temperature. Well‐defined acetoxy telechelic polyisoprene structures were obtained in a selective manner with a range of from 10 000 to 30 000, with a polydispersity index of around 2.5.

Structure produced by the metathetic depolymerization of hydroxy telechelic cis‐1,4‐polyisoprene.     

Photodeformable Polymers: A New Kind of Promising Smart Material for Micro‐ and Nano‐Applications

Summary: Starting in the 1960s, several kinds of photodeformable polymers have been developed, such as monolayers, polymer gels, solid films and liquid‐crystalline elastomers with different photodeformation mechanisms. This field evolved slowly until recently when significant achievements have been made. Most recently, Lendlein and co‐workers have put forward another new concept – using photo‐crosslinking to prepare deformable polymers with various pre‐determined shapes (Nature 2005 , 434, 879). This highlight gives a general introduction into photodeformable polymers and brings forth future challenges.

A polymer film doped with SCAA molecules where (a) is the permanent shape, (b) is the temporary shape and (c) is the recovered shape.     

Photocurable Shape‐Memory Copolymers of ε‐Caprolactone and L‐Lactide

Biodegradable and photocurable block copolymers of ε‐caprolactone and L ‐lactide were synthesized by polycondensation of PLLA diol ( = 10 000 g · mol^?1), PCL diol ( = 10 000 g · mol^?1), and a chain extender bearing a coumarin group. The effect of copolymer composition on the thermal and mechanical properties of the photocured copolymers was studied by means of DSC and cyclic tensile tests. An increase in Young's modulus and a decrease in the tensile strain with increasing PLLA content was observed for the block copolymers. Block copolymers with high PCL content showed good to excellent shape‐memory properties. Random copolymers exhibited R_f and R_r values above 90% at 45 °C for an extremely large tensile strain of 1 000%.

     

Phase Behaviour of New Side‐Chain Liquid Crystalline Polyoxetanes

Summary: The synthesis and thermal behaviour of two new polyoxetanes with side chains having a dimer structure mesogen‐spacer‐mesogen and a long terminal alkyl group are reported. The two polymers differ in the chemical structure of the central spacer. The polyoxetanes have been obtained by cationic ring‐opening polymerisation of an appropriately substituted oxetane ring. Both polyoxetanes studied exhibit liquid crystalline properties showing a similar sequence of phases. DSC and synchrotron experiments indicate that a highly ordered phase with a probable orthorhombic packing is observed at low temperature. On heating, this phase melts into a mesophase with hexagonal order within the smectic layers, which, on further heating, is transformed into a disordered smectic mesophase.

Synchrotron X‐ray diffraction patterns of one of the poyoxetanes in a heating experiment.     

Fluorescent Nanoparticles through Self‐Assembly of Linear Ionenes and Pyrenetetrasulfonate

We investigated the association of linear cationic model polyelectrolytes with oppositely charged pyrenetetrasulfonate in aqueous solution. Water soluble ionenes were prepared via Menschutkin reaction from 1‐4‐diazabicyclo[2.2.2]octane (DABCO) and dibromoalkenes. UV? Vis results revealed that PY molecules bind to ionenes in a cooperative process due to π–π interaction. Size and structure of the particles vary in dependence of inter‐charge distance on the ionene backbone. Stable spherical dye–ionene assemblies with radii between 50 and 200 nm have been obtained with one polyelectrolyte (PD4), while this was not possible with a different polyelectrolyte (PD6) or in either case at polyelectrolyte excess. It was possible to deposit the fluorescent polyelectrolyte–dye aggregates onto mica surfaces.

     

Effect of Arrangement of L‐Lactide and D‐Lactide in Poly[(L‐lactide)‐co‐(D‐lactide)] on its Resistance to Hydrolysis Studied by Molecular Modeling

Molecular modeling is used to explain how the resistance of poly[(L ‐lactide)‐co‐(D ‐lactide)] to hydrolysis is affected by the percentages of L ‐ and D ‐lactide and their arrangements in blocks or random arrangements in the polymer. Previous studies on improving the hydrolysis resistance of PLA have involved forming either poly(L ‐lactide)/poly(D ‐lactide) (PLLA/PDLA) polyblends or copolymers of L ‐ and D ‐lactide. In this study, molecular modeling was used to study the hydrolysis resistance of PLA containing various arrangements of L ‐ and D ‐lactide in the polymers. PLA copolymers are found to have less resistance to hydrolysis than a PLLA/PDLA polyblend having the same percentages of L ‐ and D ‐lactide because a polyblend can form more stereocomplexes, which is the most stable structure PLA can form.

     

Fluorene‐Based Single‐Chain Copolymers for Color‐Stable White Light‐Emitting Diodes

Fluorene‐based single‐chain copolymers with a white light emitter consisting of a blue and an orange chromophore have been synthesized and their photophysical and electroluminescent properties are investigated. The experimental results suggest that only a relatively small fraction of the orange‐emitting units incorporated into the fluorene is needed to achieve efficient white light emission by controlled incomplete energy transfer. A device from a copolymer with 0.02% DDQ content showed the highest external quantum efficiency of 2.64% with a luminance efficiency of 4.06 cd · A^?1 with CIE coordinates (0.28, 0.24). The EL emissions are extremely stable over a wide range of current densities.

     

pH‐Sensitive Micelles Formed by Interchain Hydrogen Bonding of Poly(methacrylic acid)‐block‐Poly(ethylene oxide) Copolymers

pH‐sensitive micelles formed by interchain hydrogen bonding of poly(methacrylic acid)‐block‐poly(ethylene oxide) copolymers were prepared and investigated at pH < 5. Both and R_h of the micelles increase with decreasing pH of the solution, displaying an asymptotic tendency at low pH values. The observed micelles are well‐defined nanoparticles with narrow size distributions (polydispersity ΔR_h/R_h ≤ 0.05) comparable with regular diblock copolymer micelles. The CMCs occur slightly below c = 1 × 10^?4 g · mL^?1. The micelles are negatively charged and their time stability is lower than that of regular copolymer micelles based purely on hydrophobic interactions.

     

Nanoscale Blends between Immiscible Polymers via Simultaneous Non‐Interfering Polymerisation

Summary: An important topic in polymer science seeks to improve the performances of polymer blends using nanoscale phase segregation. Here, blends between polystyrene and polycaprolactone are realised by a chemical route. The non‐interfering character of the radical polymerisation of styrene and the lanthanide halide initiated ring‐opening polymerisation of caprolactone is assessed. The molecular weights range from 2 000 to 3 500 for polycaprolactone and up to 140 000 for polystyrene, with reasonable polydispersity indexes. From calorimetry measurements, it is shown that polystyrene and low molecular weight polycaprolactone are immiscible. The morphology of the blends between the two immiscible polymers studied by atomic force microscopy is consistent with nanometer‐scale phase segregation.

AFM surface image of a nanoscale blend.     

An Easy Strategy for the Synthesis of Well‐Defined Aliphatic‐Aromatic Hyperbranched Polyesters

A one‐pot solution polymerization under mild conditions was adapted for the synthesis of well‐defined aliphatic‐aromatic polyesters with different degrees of branching. The esterification was performed at room temperature using 4,4‐bis(4′‐hydroxyphenyl)valeric acid (AB₂) and 3‐(4‐hydroxyphenyl)propionic acid (AB) as monomers. DPTS was used as a catalyst and DCC as a coupling agent. Polyesters with statistical, dendritic topology, controlled degree of branching and > 35 000 g · mol^?1 were obtained. The polymers were characterized by ¹H and ¹³C NMR, SEC, DSC, and TGA. A strong dependence of the degree of branching and the thermal properties of the polymers depending on the AB/AB₂ monomer ratio was observed.

     

Adducts of Polymeric Organolithiums with 1,1‐Diphenylethylene. Rates of Formation and Crossover to Styrene and Diene Monomers

The addition reactions of 1,1‐diphenylethylene (DPE) to polymeric organolithium (PLi) compounds and the crossover reactions of the resulting polymeric 1,1‐diphenylalkyllithiums with styrene, isoprene and butadiene monomers have been investigated and optimized. The addition of poly(styryl)lithium (PSLi) to one unit of DPE at 25 °C is complete in 6 and 8 h in benzene and cyclohexane, respectively. After 3 d at 25 °C, the extent of end‐capping with DPE was only 9% for poly(butadienyl)lithium and 15% for poly(isoprenyl)lithium. Addition of THF ([THF]/[PLi] = 15–40) promotes quantitative addition of poly(dienyl)lithiums to DPE within 1–4 hours at 25 °C. Crossover reactions of polymeric 1,1‐diphenylalkyllithiums (growth out) to styrene monomers are slow relative to crossover reactions to diene monomers. Crossover to diene monomers is complete within approximately 2 min at 25 °C and leads to well‐defined, narrow molecular weight distribution block copolymers ( = 1.01 with (out, calc) > 2 900 g · mol^?1). Crossover to styrene monomers requires 12 h and leads to broad molecular weight distributions ( > 1.1) and inefficient crossover if (out; calc) < 7 000 g · mol^?1 and the chain end concentration is ≤ 10^?3 M . Crossover to the styrene monomer is favored by low temperatures (5 °C), high chain end concentrations, and higher molecular weights of the growing block.

     

Click‐Chemistry: An Alternative Way to Functionalize Poly(2‐methyl‐2‐oxazoline)

CROP has been used to synthesize well‐defined POXZ with a monofunctional (iodomethane) or a bifunctional (1,3‐diiodopropane) initiator. POXZ has been functionalized with an azido group at one (α‐azido‐POXZ, = 3.58 × 10³ g · mol^?1) or both ends (α,ω‐azido‐POXZ, = 6.21 × 10³ g · mol^?1) of the macromolecular chain. The Huisgen 1,3‐dipolar cycloaddition has been investigated between azido‐POXZ and a terminal alkyne on a small or larger molecule (PEG). In each case, the click reaction has been successful and quantitative. In this way, different telechelic polymers (polymers bearing different functions such as acrylate, epoxide, or carboxylic acid) and block copolymers of POXZ and PEG have been prepared. The polymers have been characterized by means of FTIR, ¹H NMR, and SEC.

     

Synthesis and Photovoltaic Properties of Side‐Chain Liquid‐Crystal Click Polymers for Dye‐Sensitized Solar‐Cells Application

SCLCPs are synthesized using “click chemistry”. The resulting polymers, P1 and P2, have good solubilities and molecular‐weight distributions. Their and polydispersities are in the ranges of 26.7–8.4 × 10³ g · mol^?1 and 1.99–1.29, respectively. DSC and POM studies reveal that both polymers exhibit liquid‐crystalline behavior. P1 and P2 are found to display blue emission. DSSCs are fabricated using P1 and P2 as matrices for electrolytes. The maximum PCE of the P1‐ and P2‐based polymer electrolytes is 4.11% (at 1 sun). This synthesis route has again proven to be a useful synthetic methodology for fabricating SCLCPs that are promising materials for device applications.

     

Synthesis of Ethylene/Acrylonitrile Composite Elastomers with Nanosized Polyacrylonitrile Domains Using α‐Dimine‐[N,N] Nickel Dichloride/EASC

A series of ethylene and acrylonitrile composite elastomers were prepared using (1,4‐bis(2,6diisopropylphenyl)‐acenaphtenediimine‐nickel(II))‐dichloride/ethylaluminum sesquichloride (EASC). The xylene‐soluble polymer fraction showed nitrile bands in infrared spectroscopy at 2 245 and 2 214 cm^?1 and polyacrylonitrile‐enriched structures were detected in the xylene‐insoluble fraction by¹H and ¹³C NMR. In addition, TEM detected nanosized polyacrylonitrile domains dispersed in the polyethylene matrix. Differential scanning calorimetry scans conducted from ?70 to 350 °C measured exothermic bands corresponding to the cyclization and aromatization of the nitrile groups dispersed in the polyethylene matrix.

     

Determination of Polyisoprene‐block‐poly(methyl methacrylate) Domain Sizes Using 1H Spin Diffusion

The microphase structure of polyisoprene‐block‐poly(methyl methacrylate) diblock copolymers was studied using solid‐state NMR techniques. Wideline separation spectroscopy reveals a narrow interphase between the two polymers. The domain sizes of a lamellar sample and a sample with hexagonally ordered cylinders were determined using ¹H spin diffusion. The lamellar sample shows a domain size of 16 ± 2 nm for the minor polyisoprene phase and a long period of 33 ± 4 nm. The cylindrical structure has a long period of 38 ± 7 nm, the diameter of the PMMA cylinders is 21 ± 4 nm. These results are about 20% below the estimates obtained from theoretical calculations according to Helfand and Wasserman.

Morphologies of an a) lamellar, and b) hexagonally ordered cylindrical sample (schematic). The triangle in (b) indicates the symmetry that can be used to calculate the d_L.     

“Click” Synthesis of a Bipolar Dendrimer as a Host Material for Electrophosphorescent Devices

A new solution‐processable bipolar dendrimer with carbazole units as hole‐transporting units and oxadiazole units as electron‐transporting units was efficiently synthesized based on a convergent approach by alternation of a Cu‐catalyzed azide/alkyne cycloaddition reaction and Williamson ether synthesis. The orthogonal chemistry completely avoided protection and activation of the focal points in the process of dendrimer synthesis. The dendrimer showed a wide bandgap and good thermal stability. Electrophosphorescent devices with the configuration ITO/PEDOT:PSS/bipolar dendrimer:Ir(ppy)₃/TPBI/LiF/Al were fabricated. The devices showed a maximum current efficiency of 16.8 cd · A^?1, a maximum power efficiency of 4.22 lm · W^?1 and an external quantum efficiency of 5.7%.

     

Synthesis of AB2 3‐ and AB4 5‐Miktoarm Star Copolymers Initiated from Dendritic Tri‐ and Penta‐Functional Initiators by Combination of Ring‐Opening Polymerization of ε‐Caprolactone and Nitroxide‐Mediated Radical Polymerization of Styrene

Summary: Well‐defined AB₂ 3‐ and AB₄ 5‐miktoarm star copolymers were prepared by combination of ring‐opening polymerization (ROP) and nitroxide‐mediated radical polymerization (NMRP) using dendritic tri‐ and penta‐functional initiators. Initially, two kinds of dendritic initiators having one benzylic OH and two or four TEMPO‐based alkoxyamine moieties were prepared. Using them, ROP of ε‐caprolactone was carried out at room temperature to give poly(ε‐caprolactone)s carrying two or four alkoxyamine moieties. NMRP of styrene from the poly(ε‐caprolactone)s was carried out at 120 °C to give AB₂ 3‐ and AB₄ 5‐miktoarm star copolymers, which were analyzed by ¹H NMR and SEC. The increased linearly with conversion and the were in the range 1.10–1.37, showing that well‐defined AB₂ 3‐ and AB₄ 5‐miktoarm star copolymers were formed.

Well‐defined AB₂ 3‐ and AB₄ 5‐miktoarm star copolymers were prepared by combination of ring‐opening polymerization (ROP) and nitroxide‐mediated radical polymerization (NMRP) using dendritic tri‐ and penta‐functional initiators.     

Double‐Gyroid Morphology of a Polystyrene‐block‐Poly(ferrocenylethylmethylsilane) Diblock Copolymer: A Route to Ordered Bicontinuous Nanoscale Architectures

A polystyrene‐block‐poly(ferrocenylethylmethylsilane) diblock copolymer, displaying a double‐gyroid morphology when self‐assembled in the solid state, has been prepared with a PFEMS volume fraction ?_PFEMS = 0.39 and a total molecular weight of 64 000 Da by sequential living anionic polymerisation. A block copolymer with a metal‐containing block with iron and silicon in the main chain was selected due to its plasma etch resistance compared to the organic block. Self‐assembly of the diblock copolymer in the bulk showed a stable, double‐gyroid morphology as characterised by TEM. SAXS confirmed that the structure belonged to the Ia d space group.

     

Rheological Investigation of Shear Induced‐Mixing and Shear Induced‐Demixing for Polystyrene/Poly(vinyl methyl ether) Blend

Full Paper: The phase behavior of polystyrene (PS) and poly(vinyl methyl ether) (PVME) blend has been investigated rheologically as a function of temperature, composition and oscillating shear rate as well as different heating rates. An LCST (lower critical solution temperature)‐type phase diagram was detected rheologically from the sudden changes in the slopes of the dynamic temperature ramps of G′ at given heating and shear rate values. The rheological cloud points were dependent on the heating rate, , and oscillating shear rate, . The cloud points shifted a few degrees to higher temperatures with increasing and reached an equilibrium value (heating rate independent) at °C/min. The phase diagrams of the blends detected at = 0.1 and 1 rad/s were located in lower temperature ranges than the quiescent phase diagram, i.e., oscillating shear rate induced‐demixing at these two values for the shear rate. On the other hand, at = 10 rad/s, the phase diagram shifted to higher temperatures, higher than the corresponding values found under quiescent conditions, i.e., shear induced‐mixing took place. Based on these two observations, shear induced‐demixing and shear induced‐mixing can be detected rheologically within a single composition at low and high shear rate values, respectively, and this is in good agreement with the previous investigation using simple shear flow techniques. In addition, the William, Landel and Ferry (WLF)‐superposition principle was found to be applicable only in the single‐phase regime; however, the principle broke‐down at a temperature higher than or equal to the cloud point. Furthermore, different spinodal phase diagrams were estimated at different oscillating shear rates based on the theoretical approach of Ajji and Choplin.

Spinodal phase diagrams at different oscillating shear rates.     

Semicontinuous Emulsion Polymerization of Butyl Methacrylate and 1, 3‐Butadiene in the Presence of Cyclodextrins and Cytocompatibility of Dicarboxylic Acid Telechelic Oligo(butyl Methacrylate)s Derived from Ozonolysis of the Latexes

Ozonolysis of unsaturated polymers produced useful telechelic oligomers that can form building blocks for networks and block copolymers. The unsaturated polymers can be prepared by semicontinuous emulsion polymerization with dienes, and here it is shown that the addition of cyclodextrins enhanced the incorporation of these comonomers. Both α‐ and β‐cyclodextrin provide copolymers with higher fractions of butadiene (BD) incorporated into the chain but α‐cyclodextrin had the highest levels of incorporation. Oxidative work up after ozonolysis produced latexes of carboxylic acid oligomers of different molar masses. A clear effect of polymer size on toxicity was observed with the oligomers with < 2 700 g · mol.^?1 proving to have similar cytotoxic effects to lactic acid. However, oligomers with above 2 700 g · mol.^?1 were cytocompatible and gave similar results to a polylactide control material.