In vivo bone formation following transplantation of human adipose-derived stromal cells that are not differentiated osteogenically

A number of studies have shown in vivo bone regeneration by transplantation of osteogenic cells differentiated in vitro from adipose-derived stromal cells (ADSCs). However, the in vitro osteogenic differentiation process requires an additional culture period, and the dexamethasone that is generally used in the process may be cytotoxic. Here, we tested the hypothesis that ADSCs that are not differentiated osteogenically in vitro prior to transplantation would extensively regenerate bone in vivo when exogenous bone morphogenetic protein-2 (BMP-2) is delivered to the transplantation site. We fabricated a poly(dl-lactic-co-glycolic acid)/hydroxyapatite (PLGA/HA) composite scaffold with osteoactive HA that is highly exposed on the scaffold surface. This scaffold was able to release BMP-2 over a 4-week period in vitro. Human ADSCs cultured on BMP-2-loaded PLGA/HA scaffolds for 2 weeks differentiated toward osteogenic cells expressing alkaline phosphatase (ALP), osteopontin (OPN), and osteocalcin (OCN) mRNA, while cells on PLGA/HA scaffolds without BMP-2 expressed only ALP. To study in vivo bone formation, PLGA/HA scaffolds (group 1), BMP-2-loaded PLGA/HA scaffolds (group 2), undifferentiated ADSCs seeded on PLGA/HA scaffolds (group 3), and undifferentiated ADSCs seeded on BMP-2-loaded PLGA/HA scaffolds (group 4) were implanted into dorsal, subcutaneous spaces of athymic mice. Eight weeks after implantation, group 4 exhibited a 25-fold greater bone formation area and 5-fold higher calcium deposition than group 3. Bone regeneration by transplanted human ADSCs in group 4 was confirmed by expression of human-specific osteoblastic genes, ALP, collagen type I, OPN, OCN, and bone sialoprotein, while group 3 expressed much lower levels of collagen type I and OPN mRNA only. This study demonstrates the feasibility of extensive in vivo bone regeneration by transplantation of ADSCs without prior in vitro osteogenic differentiation, and that a PLGA/HA composite BMP-2 delivery system stimulates bone regeneration following transplantation of undifferentiated human ADSCs.     

Enhancement of ectopic bone formation by bone morphogenetic protein-2 released from a heparin-conjugated poly(L-lactic-co-glycolic acid) scaffold

In this study, a heparin-conjugated poly(l-lactic-co-glycolic acid) (HP-PLGA) scaffold was developed for the sustained delivery of bone morphogenetic protein-2 (BMP-2), and then used to address the hypothesis that BMP-2 delivered from this scaffold could enhance ectopic bone formation. We found the amount of heparin conjugated to the PLGA scaffolds could be increased up to 3.2-fold by using scaffolds made from star-shaped PLGA, as compared to scaffolds made from linear PLGA, and that the release of BMP-2 from the HP-PLGA scaffold was sustained for at least 14 days in vitro. The BMP-2 released from the HP-PLGA scaffold stimulated an increase in alkaline phosphatase (ALP) activity of osteoblasts for 14 days in vitro, suggesting that the HP-PLGA scaffold delivery system releases BMP-2 in a bioactive form for a prolonged period. By contrast, BMP-2 release from unmodified (no heparin) PLGA scaffolds induced a transient increase in ALP activity for the first 3 days and a decrease thereafter. In vivo bone formation studies showed the BMP-2-loaded HP-PLGA scaffolds induced bone formation to a much greater extent than did either BMP-2-loaded unmodified PLGA scaffolds or unloaded (no BMP-2) HP-PLGA scaffolds, with 9-fold greater bone formation area and 4-fold greater calcium content in the BMP-2-loaded HP-PLGA scaffold group compared to the BMP-2-loaded unmodified PLGA scaffold group. Collectively, these results demonstrate that the HP-PLGA delivery system is capable of potentiating the osteogenic efficacy of BMP-2, and underscore its importance as a possible bone regeneration strategy.     

Retention of in vitro and in vivo BMP-2 bioactivities in sustained delivery vehicles for bone tissue engineering

In this study, we investigated the in vitro and in vivo biological activities of bone morphogenetic protein 2 (BMP-2) released from four sustained delivery vehicles for bone regeneration. BMP-2 was incorporated into (1) a gelatin hydrogel, (2) poly(lactic-co-glycolic acid) (PLGA) microspheres embedded in a gelatin hydrogel, (3) microspheres embedded in a poly(propylene fumarate) (PPF) scaffold and (4) microspheres embedded in a PPF scaffold surrounded by a gelatin hydrogel. A fraction of the incorporated BMP-2 was radiolabeled with (125)I to determine its in vitro and in vivo release profiles. The release and bioactivity of BMP-2 were tested weekly over a period of 12 weeks in preosteoblast W20-17 cell line culture and in a rat subcutaneous implantation model. Outcome parameters for in vitro and in vivo bioactivities of the released BMP-2 were alkaline phosphatase (AP) induction and bone formation, respectively. The four implant types showed different in vitro release profiles over the 12-week period, which changed significantly upon implantation. The AP induction by BMP-2 released from gelatin implants showed a loss in bioactivity after 6 weeks in culture, while the BMP-2 released from the other implants continued to show bioactivity over the full 12-week period. Micro-CT and histological analysis of the delivery vehicles after 6 weeks of implantation showed significantly more bone in the microsphere/PPF scaffold composites (Implant 3, p<0.02). After 12 weeks, the amount of newly formed bone in the microsphere/PPF scaffolds remained significantly higher than that in the gelatin and microsphere/gelatin hydrogels (p<0.001), however, there was no statistical difference compared to the microsphere/PPF/gelatin composite. Overall, the results from this study show that BMP-2 could be incorporated into various bone tissue engineering composites for sustained release over a prolonged period of time with retention of bioactivity.     

Effect of autologous bone marrow stromal cell seeding and bone morphogenetic protein-2 delivery on ectopic bone formation in a microsphere/poly(propylene fumarate) composite

A biodegradable microsphere/scaffold composite based on the synthetic polymer poly(propylene fumarate) (PPF) holds promise as a scaffold for cell growth and sustained delivery vehicle for growth factors for bone regeneration. The objective of the current work was to investigate the in vitro release and in vivo bone forming capacity of this microsphere/scaffold composite containing bone morphogenetic protein-2 (BMP-2) in combination with autologous bone marrow stromal cells (BMSCs) in a goat ectopic implantation model. Three composites consisting of 0, 0.08, or 8 microg BMP-2 per mg of poly(lactic-co-glycolic acid) microspheres, embedded in a porous PPF scaffold, were combined with either plasma (no cells) or culture-expanded BMSCs. PPF scaffolds impregnated with a BMP-2 solution and combined with BMSCs as well as empty PPF scaffolds were also tested. The eight different composites were implanted subcutaneously in the dorsal thoracolumbar area of goats. Incorporation of BMP-2-loaded microspheres in the PPF scaffold resulted in a more sustained in vitro release with a lower burst phase, as compared to BMP-2-impregnated scaffolds. Histological analysis after 9 weeks of implantation showed bone formation in the pores of 11/16 composites containing 8 microg/mg BMP-2-loaded microspheres with no significant difference between composites with or without BMSCs (6/8 and 5/8, respectively). Bone formation was also observed in 1/8 of the BMP-2-impregnated scaffolds. No bone formation was observed in the other conditions. Overall, this study shows the feasibility of bone induction by BMP-2 release from microspheres/scaffold composites.     

Protein expression following non-viral delivery of plasmid DNA coding for basic FGF and BMP-2 in a rat ectopic model

Non-viral delivery of genes involved in stimulation of bone formation has been pursued for clinical bone repair, but no effort has been made to assess protein expression levels after in vivo delivery. This is critical to better understand gene delivery efficiencies and to compare different modes of non-viral delivery. This study investigated expression levels of basic fibroblast growth factor (bFGF) and bone morphogenetic protein-2 (BMP-2) after delivering expression vectors (plasmid DNA) with polymeric carriers in a rat subcutaneous implant model. The polymers used were a 2 kDa molecular weight polyethylenimine modified with linoleic acid (PEI-LA) and the 25 kDa PEI (PEI25) used for non-viral gene delivery in animal models. The PEI-LA mediated delivery of the plasmid DNAs in 293T cells led to ～3.5 and ～13 ng/10(6) cells/day secretion of bFGF and BMP-2 in vitro, respectively. Using the reporter protein, Green Fluorescence Protein (GFP), transfection in implants was readily detected by the presence of GFP-positive cells and a polymeric carrier was needed for this GFP expression. No bFGF and BMP-2 were detected in the scaffolds due to high background in detection assays and/or rapid diffusion of the secreted proteins from the implant site. However, using an ex vivo culture system, significant levels of BMP-2, but not bFGF, secretion were observed from the scaffolds. The BMP-2 secretion from PEI-LA delivered expression vector was equivalent and/or superior to PEI25 depending on the plasmid DNA implant dose. Gelatin scaffolds were able to sustain ～0.3 ng/sponge/day BMP-2 secretion as compared to collagen scaffolds (～0.1 ng/sponge/day). These values were equivalent to secretion rates reported with some viral delivery systems from independent studies.     

Apatite-coated collagen scaffold for bone morphogenetic protein-2 delivery

Bone morphogenetic proteins (BMPs) are the most potent osteoinductive growth factors. BMP-2 is clinically used for spine fusion and bone fracture healing. Commercially available BMP-2 uses a type I collagen scaffold as a carrier, but it only releases BMP-2 for a short period of time, which may release the bone formation efficacy. In the present study, we hypothesize that apatite coating of a collagen scaffold increases the release period as well as the osteogenic efficacy of BMP-2. Apatite coating was achieved by incubating collagen scaffolds in simulated body fluids (SBFs). Apatite coating on collagen scaffolds was confirmed by X-ray diffraction, electron spectroscopy for chemical analysis, attenuated total reflectance-Fourier transform infrared spectroscopy, and scanning electron microscopy. The rate and period of BMP-2 release from apatite-coated collagen scaffolds varied depending on the concentration of SBFs used. The 5× and 10× SBF apatite-coated collagen scaffolds released 91.8%±11.5% and 82.2%±13.1% of their loaded BMP-2 over 13 days in vitro, respectively, whereas noncoated collagen scaffold released 98.3%±2.2% over the initial one day. BMP-2 released from apatite-coated collagen scaffold significantly increased the alkaline phosphatase activity of cultured osteoblasts, compared with BMP-2 released from noncoated collagen scaffold. Computed tomography and histomorphometry showed that BMP-2 delivery using apatite-coated collagen scaffolds resulted in 2.5-fold higher bone formation volume and 4.0-fold higher bone formation area than BMP-2 delivery using noncoated collagen scaffolds. This study shows that simple apatite coating of a collagen scaffold results in a BMP-2 carrier that renders long-term release of BMP-2 and dramatically enhances osteogenic efficacy.     

RhBMP-2 microspheres-loaded chitosan/collagen scaffold enhanced osseointegration: an experiment in dog

The purpose of this study is to develop a novel recombinant human bone morphogenetic protein-2 (rhBMP-2) sustained release scaffold for dental implant osseointegration, and to evaluate the effect of this scaffold on promoting bone formation. RhBMP-2 was encapsulated in the poly-D,L-lactide-co-glycolide (PLGA) biodegradable microspheres, which were subsequently dispersed in a chitosan/collagen composite scaffold. This rhBMP-2 microspheres-loaded scaffold (S-MB) was compared with a chitosan/collagen scaffold without microspheres that directly encapsulated rhBMP-2 (S-B) in vitro and in vivo. The microstructure of the new scaffold was examined with scanning electron microscopy. The release profile of rhBMP-2 in vitro was measured at interval periods. The effect of rhBMP-2 encapsulated scaffolds on enhancing bone formation through implantation in dogs' mandibles was identified by histological examination of the regenerated bone after 4 weeks of implantation. Due to PLGA microspheres being loaded, the S-MB exhibited lower values at porosity and swelling rate, as well as a higher effective release dose than that of the S-B. Bone density, bone-implant contact, and bone-fill values measured from dog experiments demonstrated that the S-MB induced bone regeneration more quickly and was timely substituted by new bone. It was concluded that this sustained carrier scaffold based on microspheres was more effective to induce implant osseointegration.     

In vivo osteogenic response to different ratios of BMP-2 and VEGF released from a biodegradable porous system

Bone regeneration and vascularization with porous PLGA scaffolds loaded with VEGF (0.35 and 1.75 μg) and BMP-2 (3.5 and 17.5 μg), incorporated in PLGA microspheres, or the combination of either dose of BMP-2 with the low dose of VEGF were investigated in an intramedullary femur defect in rabbits. The system was designed to control growth factor (GF) release and maintain the GFs localized within the defect. An incomplete release was observed in vitro whereas in vivo VEGF and BMP-2 were totally delivered during 3 and 4 weeks, respectively. A weak synergistic effect of the dual delivery of VEGF and BMP-2 (high dose) was found by 4 weeks. However, the absence of an apparent synergistic long-term effect (12 weeks) of the combination over BMP-2 alone suggests that more work has to be done to optimize VEGF dose, sequential presentation, and the ratio of the two GFs to obtain a beneficial bone repair response.     

Biodegradable gelatin microparticles as delivery systems for the controlled release of bone morphogenetic protein-2

This work evaluated gelatin microparticles and biodegradable composite scaffolds for the controlled release of bone morphogenetic protein-2 (BMP-2) in vitro and in vivo. Gelatin crosslinking (10 and 40mM glutaraldehyde), BMP-2 dose (6 and 60ng BMP-2 per mg dry microparticles), buffer type (phosphate buffered saline (PBS) and collagenase-containing PBS), and gelatin type (acidic and basic) were investigated for their effects on BMP-2 release. Release profiles were also observed using poly(lactic-co-glycolic acid) (PLGA) microparticles with varying molecular weights (8300 and 57,500). In vitro and in vivo studies were conducted using radiolabeled BMP-2; the chloramine-T method was preferred over Bolton-Hunter reagent for radioiodination with this system. BMP-2 release from PLGA microparticles resulted in a moderate burst release followed by minimal cumulative release, while BMP-2 release from gelatin microparticles exhibited minimal burst release followed by linear release kinetics in vitro. Growth factor dose had a small effect on its normalized release kinetics probably because of an equilibrium between gelatin-bound and unbound BMP-2. Differences in release from acidic and basic gelatin microparticles may result from the different pretreatment conditions used for gelatin synthesis. The in vitro release kinetics for both gelatin microparticles alone and within composite scaffolds were dependent largely on the extent of gelatin crosslinking; varying buffer type served to confirm that controlled release relies on enzymatic degradation of the gelatin for controlled release. Finally, in vivo studies with composite scaffolds exhibited minimal burst and linear release up to 28 days. In summary, dose effects on BMP-2 release were found to be minimal while varying gelatin type and release medium can alter release kinetics. These results demonstrate that a systematic control of BMP-2 delivery from gelatin microparticles can be achieved by altering the extent of basic gelatin crosslinking.     

Orthotopic bone formation by implantation of apatite-coated poly(lactide-co-glycolide)/hydroxyapatite composite particulates and bone morphogenetic protein-2

Bone morphogenetic proteins (BMPs) are the most potent osteoinductive growth factors. However, a delivery system is essential to take advantage of the osteoinductive effect of BMPs. In the present study, we tested the suitability of apatite-coated poly(D,L-lactide-co-glycolide)/nanohydroxyapatite (PLGA/HA) particulates as carriers for the controlled release of BMP-2. The release of BMP-2 from apatite-coated PLGA/HA particulates was sustained for at least 4 weeks in vitro. A delivery system of apatite-coated PLGA/HA particulates suspended in fibrin gel further slowed the BMP-2 release rate. In vivo implantation of either Fibrin gel + BMP-2 or Fibrin gel + apatite-coated PLGA/HA particulates showed enhanced new bone formation in critical-sized calvarial defects of rats 8 weeks after implantation, compared to implantation of fibrin gel only. Importantly, new bone formation was much higher in the defects treated with BMP-2 delivery using apatite-coated PLGA/HA particulates in fibrin gel (Fibrin gel + PLGA/HA + BMP-2 group) than in the defects treated either with apatite-coated PLGA/HA particulates in fibrin gel (Fibrin gel + BMP-2 group) or with BMP-2 delivery using fibrin gel alone (Fibrin gel + BMP-2 group). BMP-2 and osteoinductive HA had an additive effect on orthotopic bone formation. In conclusion, the apatite-coated PLGA/HA particulates showed good results as carriers for BMP-2. The BMP-2 delivery system showed high osteogenic capability in a rat calvarial bone defect model. The local and sustained delivery system for BMP-2 developed in this study may be useful as a carrier for BMP-2 and would enhance bone regeneration efficacy for the treatment of large bone defects.     

The osteogenesis of bacterial cellulose scaffold loaded with bone morphogenetic protein-2

Bacterial cellulose (BC) is a nanofibrous biological material with attractive physicochemical properties and biocompatibility. Its fiber is similar to the collagenous fiber of bone. To explore if BC could be utilized as a localized delivery system to increase the local concentration of cytokines for tissue engineering, we prepared the BC scaffold from Acetobacter xylinum X-2 (A.?xylinum X-2) and investigated the osteogenic potential of the BC scaffold coated with bone morphogenetic protein-2 (BMP-2). The data showed that BC had a good biocompatibility and induced differentiation of mouse fibroblast-like C2C12 cells into osteoblasts in the presence of BMP-2 in?vitro, as demonstrated by alkaline phosphatase (ALP) activity assays. Within a certain range (0?～?3?μg/scaffold), the osteogenic activity of induced osteoblasts was positively correlated to the concentrations of BMP-2. In in?vivo subcutaneous implantation studies, BC scaffolds carrying BMP-2 showed more bone formation and higher calcium concentration than the BC scaffolds alone at 2 and 4 weeks, respectively. The ALP activity assay and the measurement of calcium concentration of BC scaffolds also showed that more new bone was developed in the BC scaffolds carrying BMP-2 than in the BC scaffolds alone. Our studies suggest that BC is a good localized delivery system for BMPs and would be a potential candidate in bone tissue engineering.     

双基因转染犬骨髓间充质干细胞复合HA/ZrO2生物材料新型组织工程骨的构建及其体外成骨能力的研究

目的 构建骨形态发生蛋白2(BMP-2)、血管内皮细胞生长因子165(VEGF165)双基因修饰的骨髓间充质干细胞(BMSCs)复合羟基磷灰石复合二氧化锆(HA/ZrO₂)生物材料的新型组织工程骨,并观察该组织工程骨在体外的成骨能力。方法 采用有机泡沫作为模版,干铺烧制法制备新型的蜂窝状HA/ZrO₂梯度生物材料,电镜观察新型生物材料的表面特性,生物力学试验机检测其力学性能。采取1岁龄健康beagle犬骨髓分离原代BMSCs进行培养,建立双基因修饰的BMSCs复合蜂窝状HA/ZrO₂梯度生物材料的共培养体,构建新型组织工程骨。实验分为4组:未转染组,只转染BMP-2(BMP-2组)和VEGF165(VEGF165组)单一目的基因的BMSCs,以及转染BMP-2、VEGF165共基因慢病毒的BMSCs组(BMP-2+VEGF165组)。显微镜下观察细胞在支架材料上的生长情况,用碱性磷酸酶染色检测各组细胞成骨分化能力,免疫组织化学染色检测其成骨细胞特异性蛋白骨Ⅰ型胶原及骨钙素的分泌。结果 新型材料电镜下其表面整体呈多孔状,孔径125~550 μm,各孔之间存在缝隙联结;其平均抗弯强度为812.25 MPa,最高可达987.12 MPa;共培养体建立后扫描电镜观察转染后的BMSCs在支架材料上黏附生长状况良好,双基因联合转染组细胞分泌基质旺盛;BMP-2+VEGF165组细胞碱性磷酸酶活性检测明显高于其他各组(F=1 029.398,P<0.01),免疫组织化学染色在不同阶段发现成骨细胞早晚期分泌的骨Ⅰ型胶原及骨钙素特异性蛋白。结论 新型的蜂窝状HA/ZrO₂梯度生物材料是一种合适种子细胞生长的支架材料,并且其力学满足人体四肢承重骨的需要;VEGF165、BMP-2双基因转染BMSCs后具有协同作用,能够促进其在体外的成骨分化。     

多孔HA/PU复合支架材料生物相容性的评估

进行了三维多孔立体结构的纳米羟基磷灰石/聚氨酯(HA/PU)复合支架材料体外细胞培养和体内肌肉埋植实验研究,评估材料的生物相容性。实验选用SD大鼠的骨髓基质干细胞(BMSCs)和健康的SD雌性大鼠,进行细胞相容性、形态学观察和组织学切片分析。HA/PU支架材料的多孔性为细胞的生长提供了良好的微环境,细胞在内部贴壁爬行、增殖并分化,细胞毒性为零级,材料与周围组织有良好的结合,降解的空间有结缔组织纤维长入。实验表明,HA/PU复合支架材料具有良好的细胞亲和性和组织学相容性,可作为一类新型组织工程支架材料。     

Comparative study of osteogenic potential of a composite scaffold incorporating either endogenous bone morphogenetic protein-2 or exogenous phytomolecule icaritin: an in vitro efficacy study

A local delivery system with sustained and efficient release of therapeutic agents from an appropriate carrier is desirable for orthopedic applications. Novel composite scaffolds made of poly (lactic-co-glycolic acid) with tricalcium phosphate (PLGA/TCP) were fabricated by an advanced low-temperature rapid prototyping technique, which incorporated either endogenous bone morphogenetic protein-2 (BMP-2) (PLGA/TCP/BMP-2) or phytomolecule icaritin (ICT) (PLGA/TCP/ICT) at low, middle and high doses. PLGA/TCP served as control. In vitro degradation, osteogenesis and release tests showed statistical differences among PLGA/TCP/ICT, PLGA/TCP and PLGA/TCP/BMP-2 groups, where PLGA/TCP/ICT had the desired slow release of bioactive icaritin in a dose-dependent manner, whereas there was almost no BMP-2 release from the PLGA/TCP/BMP-2 scaffolds. PLGA/TCP/ICT significantly increased more ALP activity, upregulated mRNA expression of osteogenic genes and enhanced calcium deposition and mineralization in rabbit bone marrow stem cells cultured on scaffolds compared with the other two groups. These results indicate the desired degradation rate, osteogenic capability and release property in PLGA/TCP/ICT composite scaffold, as icaritin preserved its bioactivity and structure after incorporation, while PLGA/TCP/BMP-2 did not show an initially expected osteogenic potential, owing to loss of the original bioactivity of BMP-2 during its incorporation and fabrication procedure. The results suggest that PLGA/TCP composite scaffolds incorporating osteogenic ICT might be a promising approach for bone tissue bioengineering and regeneration.     

Retention and activity of BMP-2 in hyaluronic acid-based scaffolds in vitro.

Bone morphogenetic protein-2 (BMP-2) delivered in a suitable implantable matrix has the potential to repair local skeletal defects by inducing new bone formation from undifferentiated pluripotent stem cells resident in host tissue. In this study, we examined in vitro the potential of a derivatized hyaluronic acid (Hyaff-11) scaffold as a delivery vehicle for recombinant human BMP-2 (rhBMP-2) in bone and cartilage repair therapies. Hyaff-11 scaffolds were fabricated using a phase inversion/particulate leaching method and soak-loaded with rhBMP-2. In vitro release kinetics of rhBMP-2, demonstrated using enzyme-linked immunosorbant assay and alkaline phosphatase (ALP) assay revealed a slow, sustained rhBMP-2 release during 28 days, with a cumulative release of 31.82% of the initial rhBMP-2 loaded. rhBMP-2 was released in bioactive form as demonstrated by ALP induction of pluripotent cell line, C3H10T1/2 (T1/2), down the osteoblast lineage when incubated with the release supernatants. rhBMP-2 retention in Hyaff-11 scaffolds was greater than that from collagen gels, which released most of the initially loaded rhBMP-2 by 14 days. rhBMP-2-loaded Hyaff-11 scaffolds were also seeded with T1/2 cells and evaluated at 3, 7, 14, and 28 days for viability and expression of osteoblast phenotype. Cells remained viable throughout the study and expressed a time- and dose-dependent ALP and osteocalcin expression in the rhBMP-2 groups. Based on these observations, Hyaff-11 scaffolds may be suitable delivery systems for rhBMP-2 in bone/cartilage repair because of their ability to retain rhBMP-2, release low levels of bioactive rhBMP-2 to the local environment in a sustained manner, and stimulate differentiation of pluripotent stem cells.     

Enhanced healing of rat calvarial defects with sulfated chitosan-coated calcium-deficient hydroxyapatite/bone morphogenetic protein 2 scaffolds

Calcium phosphate cements (CPCs), which are widely used in bone regeneration, possess good biocompatibility and osteoconductivity and have been demonstrated to be candidate carriers for bone growth factors. However, limited release of growth factors from CPCs and slow degradation of the materials are not desirable for certain clinical applications. Previous studies have shown that calcium-deficient hydroxyapatite (CDHA) from CPCs presents more rapid degradation rate than CPCs. In this study, a hybrid growth factor delivery system was prepared by using bone morphogenetic protein 2 (BMP-2) loaded CDHA porous scaffold with sulfated chitosan (SCS) coating for improved release profile. We tested the BMP-2 release characteristic of CDHA/BMP-2/SCS composite in vitro and its ability to repair rat calvarial bone defects. A higher percentage of BMP-2 was released when sulfated chitosan coating was present compared with CDHA/BMP-2 group. Eight weeks postoperation, the repaired crania were evaluated by microcomputed tomography, sequential fluorescent labeling, histological analysis, and immunohistochemistry. CDHA/BMP-2/SCS group promoted the most extensive new bone formation than CDHA/BMP-2 and CDHA groups. Our observations suggest that sulfated chitosan coating could enhance the release profile of CDHA/BMP-2 composite in vitro and promote new bone formation in vivo. The hybrid CDHA/BMP-2/SCS system is a promising growth factor delivery strategy for bone regeneration.     

Efficient Bone Regeneration Induced by Bone Morphogenetic Protein-2 Released from Apatite-Coated Collagen Scaffolds

Abstract

Bone morphogenetic proteins (BMPs) are the most potent osteoinductive growth factors. Clinically utilized BMP-2 uses a type-I collagen scaffold as a carrier. Here we hypothesized that an apatite coating on a type-I collagen scaffold would prolong the BMP-2 release period and enhance bone regeneration in calvarial defects in mice. Apatite coating was achieved by incubating collagen scaffolds in simulated body fluid. BMP-2 release kinetics and bioactivity were evaluated by enzyme-linked immunosorbent assay and alkaline phosphatase activity measurement of cultured osteoblasts. Computed tomography and histomorphometry were performed eight weeks after various doses of BMP-2 were delivered to mouse calvarial defects using either non-modified or apatite-coated collagen scaffolds. Apatite-coated collagen scaffolds released 91.8 ± 11.5% of the loaded BMP-2 over 13 days in vitro, whereas non-modified collagen scaffolds released 98.3 ± 2.2% over the initial one day. The in vivo study showed that BMP-2 delivery with apatite-coated collagen scaffolds resulted in a significantly greater bone formation area and higher bone density than that with non-modified collagen scaffolds. This study suggests that simple apatite coating on collagen scaffolds can enhance the bone regeneration efficacy of BMP-2 released from collagen scaffolds.     

Osteogenic differentiation of rabbit mesenchymal stem cells in thermo-reversible hydrogel constructs containing hydroxyapatite and bone morphogenic protein-2 (BMP-2)

The aim of this study was to assess the efficacy of ectopic bone formation in a three-dimensional hybrid scaffold in combination with hydroxyapatite (HA) and poly(NiPAAm-co-AAc) as an injectable vehicle in the form of a supporting matrix for the osteogenic differentiation of rabbit mesenchymal stem cells (MSCs). Osteogenic differentiation of MSCs in the hybrid scaffold was greatly influenced by the addition of growth factors. When the osteoinduction activity of hybrid scaffold was studied following implantation into the back subcutis of nude mouse in terms of histological and biochemical examinations, significantly homogeneous bone formation was histologically observed throughout the hybrid scaffolds containing growth factor (BMP-2: bone morphogenic protein-2). The level of alkaline phosphatase activity and osteocalcin content at the implanted sites of hybrid scaffolds were significantly high for the perfusion group compared with those in static culture group. We conclude that combination of MSC-seeded hybrid scaffold containing BMP-2 was a promising method by which to enhance in vitro osteogenic differentiation of MSC and in vivo ectopic bone formation.     

Novel mesoporous silica-based antibiotic releasing scaffold for bone repair

Tissue engineering scaffolds with a micro- or nanoporous structure and able to deliver special drugs have already been confirmed to be effective in bone repair. In this paper, we first evaluated the biomineralization properties and drug release properties of a novel mesoporous silica–hydroxyapatite composite material (HMS–HA) which was used as drug vehicle and filler for polymer matrices. Biomineralization can offer a credible prediction of bioactivity for the synthetic bone regeneration materials. We found HMS–HA exhibited good apatite deposition properties after being soaked in simulated body fluid (SBF) for 7 days. Drug delivery from HMS–HA particle was in line with Fick’s law, and the release process lasted 12 h after an initial burst release with 60% drug release. A novel tissue engineering scaffold with the function of controlled drug delivery was developed, which was based on HMS–HA particles, poly(lactide-co-glycolide) (PLGA) and microspheres sintering techniques. Mechanical testing on compression, degradation behavior, pH-compensation effect and drug delivery behavior of PLGA/HMS–HA microspheres sintered scaffolds were analyzed. Cell toxicity and cell proliferation on the scaffolds was also evaluated. The results indicated that the PLGA/HMS–HA scaffolds could effectively compensate the increased pH values caused by the acidic degradation product of PLGA. The compressive strength and modulus of PLGA/HMS–HA scaffolds were remarkably high compared to pure PLGA scaffold. Drug delivery testing of the PLGA/HMS–HA scaffolds indicated that PLGA slowed gentamycin sulfate (GS) release from HMS–HA particles, and the release lasted for nearly one month. Adding HMS–HA to PLGA scaffolds improved cytocompatibility. The scaffolds demonstrated low cytotoxicity, and supported mesenchymal stem cells growth more effectively than pure PLGA scaffolds. To summarize, the data supports the development of PLGA/HMS–HA scaffolds as potential degradable and drug delivery materials for bone replacement.