The response of annulus fibrosus cell to fibronectin-coated nanofibrous polyurethane-anionic dihydroxyoligomer scaffolds

Tissue engineering of the annulus fibrosus(AF), a component of the intervertebral disc, has proven to be challenging due to its complex oriented lamellar structure. Previously it was demonstrated that polyurethane (PU) scaffolds containing an anionic dihydroxy oligomers (ADO) may be suitable to use in this application. The current study examines whether matrix protein(s) coatings (collagen type I, collagen type I and fibronectin, fibronectin, or vitronectin) would promote cell and collagen orientation that more closely mimics native AF. The greatest cell attachment occurred when scaffolds were pre-coated with Fn. Cells on Fn-coated scaffolds were aligned parallel to scaffold fibers, a process that involved α5β1 integrin, as determined by integrin-specific blocking antibodies, which in turn reduced AF cell spreading and alignment. Cell shape was regulated by the actin cytoskeleton as cells grown in the presence of cytochalasin D did not spread. Cells on Fn-coated PU scaffolds formed fibrillar Fn, synthesized significantly more collagen, and showed linear alignment of the secreted type I collagen when compared to cells grown on the other protein-coated scaffolds and the non-coated control. Thus Fn-coating of PU-ADO scaffolds appears to promote properly oriented AF cells and collagen, which should facilitate developing AF tissue that more closely mimics the native tissue.     

Collagen fibril diameter and alignment promote the quiescent keratocyte phenotype

In this study, we investigated how matrix nanotopography affects corneal fibroblast phenotype and matrix synthesis. To this end, corneal fibroblasts isolated from bovine corneas were grown on collagen nanofiber scaffolds of different diameters and alignment--30 nm aligned fibrils (30A), 300 nm or larger aligned fibrils (300A), and 30 nm nonaligned fibrils (30NA) in comparison with collagen coated flat glass substrates (FC). Cell morphology was visualized using confocal microscopy. Quantitative PCR was used to measure expression levels of six target genes: the corneal crystallin-transketolase (TKT), the myofibroblast marker-α-smooth muscle actin (SMA), and four matrix proteins-collagen 1 (COL1), collagen 3 (COL3), fibronectin (FN), and biglycan. It was found that SMA expression was down-regulated and TKT expression was increased on all three collagen nanofiber substrates, compared with the FC control substrates. However, COL3 and biglycan expression was also significantly increased on 300A, compared with the FC substrates. Thus matrix nanotopography down-regulates the fibrotic phenotype, promotes formation of the quiescent keratocyte phenotype, and influences matrix synthesis. These results have significant implications for the engineering of corneal replacements and for promoting regenerative healing of the cornea after disease and/or injury.     

聚己二酸丁二醇酯-对苯二甲酸丁二醇酯/Ⅰ型胶原取向纤维促进前交叉韧带断裂后腱-骨愈合

背景:材料表面的微/纳米结构对细胞的行为具有调控作用,肌腱组织主要由平行的胶原纤维组成,因此取向纤维结构对腱-骨愈合具有一定的促进作用.目的:探索聚己二酸丁二醇酯-对苯二甲酸丁二醇酯[poly(butylene adipate-co-terephthalate),PBAT]/Ⅰ型胶原取向纤维支架的生物相容性和成骨诱导活...     

Novel nanofiber-based scaffold for rotator cuff repair and augmentation

The debilitating effects of rotator cuff tears and the high incidence of failure associated with current grafts underscore the clinical demand for functional solutions for tendon repair and augmentation. To address this challenge, we have designed a poly(lactide-co-glycolide) (PLGA) nanofiber-based scaffold for rotator cuff tendon tissue engineering. In addition to scaffold design and characterization, the objective of this study was to evaluate the attachment, alignment, gene expression, and matrix elaboration of human rotator cuff fibroblasts on aligned and unaligned PLGA nanofiber scaffolds. Additionally, the effects of in vitro culture on scaffold mechanical properties were determined over time. It has been hypothesized that nanofiber organization regulates cellular response and scaffold properties. It was observed that rotator cuff fibroblasts cultured on the aligned scaffolds attached along the nanofiber long axis, whereas the cells on the unaligned scaffold were polygonal and randomly oriented. Moreover, distinct integrin expression profiles on these two substrates were observed. Quantitative analysis revealed that cell alignment, distribution, and matrix deposition conformed to nanofiber organization and that the observed differences were maintained over time. Mechanical properties of the aligned nanofiber scaffolds were significantly higher than those of the unaligned, and although the scaffolds degraded in vitro, physiologically relevant mechanical properties were maintained. These observations demonstrate the potential of the PLGA nanofiber-based scaffold system for functional rotator cuff repair. Moreover, nanofiber organization has a profound effect on cellular response and matrix properties, and it is a critical parameter for scaffold design.     

Establishing a gingival fibroblast phenotype in a perfused degradable polyurethane scaffold: Mediation by TGF-β1, FGF-2, β1-integrin,and focal adhesion kinase

Medium perfusion has been shown to enhance cell proliferation and matrix protein production. In more recent work, under perfusion, a degradable/polar/hydrophobic/ionic polyurethane (D-PHI) scaffold was shown to enhance growth and production of collagen by human gingival fibroblasts (HGFs). However, the nature of the HGFs cultured in the perfused D-PHI scaffolds, and the mechanisms by which medium perfusion activates these cells to facilitate proliferation and collagen production are not defined. The current study sought to investigate HGF interaction within the D-PHI scaffolds under perfusion by examining the production and the spatial distribution of α-smooth muscle actin (α-SMA) and type I collagen (Col I), the secretion of transforming growth factor (TGF)-β1 and basic fibroblast growth factor (FGF-2) in the conditioned medium, with a goal of defining the mechanistic pathways affecting the production of these markers in the dynamic culture. It was found that the perfused D-PHI scaffold shifted the HGF phenotype from myofibroblast-like (upregulation of α-SMA) to fibroblast-like (downregulation of α-SMA) over the course of 28 days. Both TGF-β1 and FGF-2 were significantly greater in the dynamic vs. static culture at day 1. Although TGF-β1 has been often reported to increase α-SMA and collagen expression, the D-PHI material and significant high level of FGF-2 at day 1 of dynamic culture appear to play a role in regulating α-SMA production while allowing HGFs to increase Col I production. β1-integrin production was increased and focal adhesion kinase (FAK) were activated 2 h after HGFs were exposed to medium perfusion, which may have in part promoted cell growth, α-SMA and Col I production in the early dynamic culture. Consequently, the D-PHI material and medium perfusion has modulated fibroblast phenotype, and enhanced cell growth and Col I production through the coordinated actions of TGF-β1, FGF-2, β1-integrin and FAK.     

Culture on electrospun polyurethane scaffolds decreases atrial natriuretic peptide expression by cardiomyocytes in vitro

The function of the mammalian heart depends on the functional alignment of cardiomyocytes, and controlling cell alignment is an important consideration in biomaterial design for cardiac tissue engineering and research. The physical cues that guide functional cell alignment in vitro and the impact of substrate-imposed alignment on cell phenotype, however, are only partially understood. In this report, primary cardiac ventricular cells were grown on electrospun, biodegradable polyurethane (ES-PU) with either aligned or unaligned microfibers. ES-PU scaffolds supported high-density cultures and cell subpopulations remained intact over two weeks in culture. ES-PU cultures contained electrically-coupled cardiomyocytes with connexin-43 localized to points of cell:cell contact. Multi-cellular organization correlated with microfiber orientation and aligned materials yielded highly oriented cardiomyocyte groupings. Atrial natriuretic peptide, a molecular marker that shows decreasing expression during ventricular cell maturation, was significantly lower in cultures grown on ES-PU scaffolds than in those grown on tissue culture polystyrene. Cells grown on aligned ES-PU had significantly lower steady state levels of ANP and constitutively released less ANP over time indicating that scaffold-imposed cell organization resulted in a shift in cell phenotype to a more mature state. We conclude that the physical organization of microfibers in ES-PU scaffolds impacts both multi-cellular architecture and cardiac cell phenotype in vitro.     

Alignment of human vascular smooth muscle cells on parallel electrospun synthetic elastin fibers

We generated parallel elastic fibers from synthetic elastin (SE) as a model of the arterial media and assessed the alignment of smooth muscle cells (SMCs). SE utilized crosslinked electrospun human tropoelastin to form aligned fibers that mimicked the topography and elastin-rich content of the medial extracellular matrix. Bundled parallel fibers were anisotropically more elastic than randomly arranged scaffolds (111 ± 25 kPa vs. 265 ± 17 kPa) in the direction of the fibers. Aligned and random fiber scaffolds each supported SMC growth. Following attachment, SMCs proliferated longitudinally on the parallel fibers and expressed native α-smooth muscle actin.     

新型纳米支架与神经干细胞的凋亡

背景：胶原作为脊髓组织工程的良好支架有利于神经细胞及神经纤维的黏附和生长,但机械性能较差,需要在制备时提高其基本性能,还应对种子细胞的生物学行为产生积极影响。 目的：分析胶原纳米组织工程支架的性能,检测其对神经干细胞凋亡行为及相关基因表达的影响。 方法：采用电纺丝技术制备纤维定向排列及非定向排列的胶原纳米纤维膜,并对其进行表征。将新生SD大鼠脊髓源性神经干细胞分别与纤维定向排列及非定向排列的胶原纳米纤维膜共培养,并设置单独神经干细胞培养为对照,检测细胞凋亡情况及相关基因表达变化。 结果与结论：定向及非定向胶原纳米纤维膜的直径及形貌均达到纳米组织工程支架标准,溶胀系数较高,孔隙率较高,力学性能佳。与对照组比较,两胶原纳米纤维膜组神经干细胞凋亡率明显降低(P < 0.05),细胞凋亡相关基因中bcl-2基因表达量明显增加,bax及Caspase-3基因表达明显下降;两胶原纳米纤维膜组神经干细胞凋亡率差异无显著性意义。表明新型胶原纳米组织工程支架性能良好,能够抑制细胞凋亡,从基因表达水平调节神经干细胞的凋亡行为。     

Novel chitosan-based hyaluronan hybrid polymer fibers as a scaffold in ligament tissue engineering

To clarify the feasibility of using novel chitosan-based hyaluronan hybrid polymer fibers as a scaffold in ligament tissue engineering, their mechanical properties and ability to promote cellular adhesion, proliferation, and extracellular matrix production were studied in vitro. Chitosan fibers and chitosan-based 0.05% and 0.1% hyaluronan hybrid fibers were developed by the wet spinning method. Hyaluronan coating significantly increased mechanical properties, compared to the chitosan fibers. Rabbit fibroblasts adhesion onto hybrid fibers was significantly greater than for the control and chitosan fibers. For analysis of cell proliferation and extracellular matrix production, a three-dimensional scaffold was created by simply piling up each fiber. At 1 day after cultivation, the DNA content in the hybrid scaffolds was higher than that in the chitosan scaffold. Scanning electron microscopy showed that the fibroblasts had produced collagen fibers after 14 days of culture. Immunostaining for type I collagen was clearly predominant in the hybrid scaffolds, and the mRNA level of type I collagen in the hybrid scaffolds were significantly greater than that in the chitosan scaffold. The present study revealed that hyaluronan hybridization with chitosan fibers enhanced fiber mechanical properties and in vitro biological effects on the cultured fibroblasts.     

Gene expression by fibroblasts seeded on small intestinal submucosa and subjected to cyclic stretching

Extracellular matrix scaffolds derived from porcine small intestinal submucosa (SIS-ECM) have been shown to promote the formation of site-specific tissue in a number of preclinical animal studies. However, this constructive remodeling process requires that the scaffold be subjected to a site-specific mechanical environment. The specific quantitative effects of mechanical loading on the gene expression patterns of fibroblasts seeded on SIS-ECM are unknown and yet very important in the tissue remodeling process. The objective of the present study was to evaluate the expression of collagen type I (Col I), collagen type III (Col III), smooth muscle actin (SMA), tenascin-C (TN-C), matrix metalloprotease-2 (MMP-2), matrix metalloprotease-9 (MMP-9), transforming growth factor-beta1 (TGF-beta1), and transforming growth factor-beta3 (TGF-beta3) by fibroblasts subjected to various magnitudes (0%, 5%, 10%, and 15%) and frequencies (0.1 Hz, 0.3 Hz, and 0.5 Hz) of stretch. A new cyclic-stretching tissue culture (CSTC) system was developed. This system consists of eight independently controlled culture chambers that can be operated in a sterile incubator. Each chamber includes a load cell so that the load in each scaffold can be monitored. It was found that different stretching regimens led to complex and distinctive patterns of gene expression by fibroblasts seeded onto SIS-ECM. In general, the fibroblasts increased expression of Col I up to 5-fold and decreased that of Col III with increased frequency of stretch. In addition, the fibroblasts exhibited a contractile phenotype with increased expression of SMA, TN-C, and TGF-beta1. These findings support the concept that the mechanical environment of a remodeling ECM scaffold may have substantial effects on the behavior of cells within the scaffold and contribute to the site-specific tissue remodeling that has been observed in in vivo studies.     

Fibroblast expression of α-smooth muscle actin, α2β1 integrin and αvβ3 integrin: influence of surface rigidity

Open wound contraction necessitates cell and connective tissue interactions, that produce tension. Investigating fibroblast responses to tension utilizes collagen coated polyacrylamide gels with differences in stiffness. Human foreskin fibroblasts were plated on native type I collagen-coated polyacrylamide gel cover slips with different rigidities, which were controlled by bis-acrylamide concentrations. Changes in alpha smooth muscle actin (αSMA), α2β1 integrin (CD49B) and αvβ3 integrin (CD-51) were documented by immuno-histology and Western blot analysis. Cells plated on rigid gels were longer, and expressed αvβ3 integrin and αSMA within cytoplasmic stress fibers. In contrast, cells on flexible gels were shorter, expressed α2β1 integrin and had fine cytoskeletal microfilaments without αSMA. Increased tension changed the actin makeup of the cytoskeleton and the integrin expressed on the cell's surface. These in vitro findings are in agreement with the tension buildup as an open wound closes by wound contraction. It supports the notion that cells under minimal tension in early granulation tissue express α2β1 integrin, required for organizing fine collagen fibrils into thick collagen fibers. Thicker fibers create a rigid matrix, generating more tension. With increased tension cytoskeletal stress fibers develop that contain αSMA and αvβ3 integrin that replaces α2β1 integrin, consistent with cell switching from collagen to non-collagen proteins interactions.     

Artificial niche combining elastomeric substrate and platelets guides vascular differentiation of bone marrow mononuclear cells

Bone marrow-derived progenitor cells are promising cell sources for vascular tissue engineering. However, conventional bone marrow mesenchymal stem cell expansion and induction strategies require plating on tissue culture plastic, a stiff substrate that may itself influence cell differentiation. Direct scaffold seeding avoids plating on plastic; to the best of our knowledge, there is no report of any scaffold that induces the differentiation of bone marrow mononuclear cells (BMNCs) to vascular cells in vitro. In this study, we hypothesize that an elastomeric scaffold with adsorbed plasma proteins and platelets will induce differentiation of BMNCs to vascular cells and promote vascular tissue formation by combining soft tissue mechanical properties with platelet-mediated tissue repairing signals. To test our hypothesis, we directly seeded rat primary BMNCs in four types of scaffolds: poly(lactide-co-glycolide), elastomeric poly(glycerol sebacate) (PGS), platelet-poor plasma-coated PGS, and PGS coated by plasma supplemented with platelets. After 21 days of culture, osteochondral differentiation of cells in poly(lactide-co-glycolide) was detected, but most of the adhered cells on the surface of all PGS scaffolds expressed calponin-I and α-smooth muscle actin, suggesting smooth muscle differentiation. Cells in PGS scaffolds also produced significant amount of collagen and elastin. Further, plasma coating improves seeding efficiency, and platelet increases proliferation, the number of differentiated cells, and extracellular matrix content. Thus, the artificial niche composed of platelets, plasma, and PGS is promising for artery tissue engineering using BMNCs.     

Temporal spatial expression and function of non-muscle myosin II isoforms IIA and IIB in scar remodeling

Scar contracture is believed to be caused by the cell contractility during the remodeling phase of wound healing. Cell contractility is mediated by non-muscle myosin II (NMMII) and actin, but the temporal-spatial expression profile of NMMII isoforms A and B (IIA and IIB) during the remodeling phase and the role of NMMII in scar fibroblast tissue remodeling are unknown. Human scar tissue immunostained for IIA and IIB showed that both isoforms were highly expressed in scar tissue throughout the remodeling phase of repair and expression levels returned to normal after the remodeling phase. Human scar tissue immunostained for β-, γ- and α-smooth muscle actin showed that all isoforms were consistently expressed throughout the remodeling phase of repair. The β- and γ-smooth muscle actin were widely expressed throughout the dermis, but α-smooth muscle actin was only locally expressed within the dermis. In vitro, fibroblasts explanted from scar tissue were shown to express more IIA than fibroblasts explanted from normal tissue and scar fibroblasts contracted collagen lattices to a greater extent than normal fibroblasts. Blebbistatin was used to demonstrate the function of NMMII in collagen lattice contraction. In normal tissue, fibroblasts are stress-shielded from external tensile stress by the extracellular matrix. After dermal injury and during remodeling, fibroblasts are exposed to a matrix of increased stiffness. The effect of matrix stiffness on IIA and IIB expression was examined. IIA expression was greater in fibroblasts cultured in collagen lattices with increasing stiffness, and in fibroblasts cultured on glass slides compared with polyacrylamide gels with stiffness of 1 kPa. In conclusion, NMMII and actin isoform expression changes coordinately with the remodeling phase of repair, and NMMII is increased as matrix stiffness increases. As NMMII expression increases, so does the fibroblast contractility.     

Orthogonal scaffold of magnetically aligned collagen lamellae for corneal stroma reconstruction

The creation of 3D scaffolds that mimic the structure of physiological tissue required for normal cell function is a major bioengineering challenge. For corneal stroma reconstruction this necessitates the creation of a stroma-like scaffold consisting of a stack of orthogonally disposed sheets of aligned collagen fibrils. This study demonstrates that such a scaffold can be built up using magnetic alignment. By allowing neutralized acid-soluble type I collagen to gel in a horizontal magnetic field (7 T) and by combining a series of gelation-rotation-gelation cycles, a scaffold of orthogonal lamellae composed of aligned collagen fibrils has been formed. Although initially dilute, the gels can be concentrated without noticeable loss in orientation. The gels are translucent but their transparency can be greatly improved by the addition of proteoglycans to the gel-forming solution. Keratocytes align by contact guidance along the direction of collagen fibrils and respect the orthogonal design of the collagen template as they penetrate into the bulk of the 3D matrix. The scaffold is a significant step towards the creation of a corneal substitute with properties resembling those of native corneal stroma.     

Chitosan-alginate as scaffolding material for cartilage tissue engineering

Tissue compatibility of chitosan-alginate scaffolds was studied in vitro in terms of cell morphology, proliferation, and functionality using HTB-94 cells. The scaffold has an interconnected 3D porous structure, and was fabricated by thermally induced phase separation followed by freeze drying. Cell proliferation on the chitosan-alginate scaffold was found to be faster than on a pure chitosan scaffold. After cell culture for 2 weeks in vitro, the cells on the chitosan scaffold gradually assumed a fibroblast-like morphology while the cells on the chitosan-alginate scaffold retained their spherical morphology throughout the period of study. SDS-PAGE electrophoresis and Western blot assays for proteins extracted from cells grown on scaffolds indicated that production of cartilage-specific collagen type II, a marker for chondrocytic phenotype, increased from week 2 to week 3 on the chitosan-alginate scaffold but decreased on the chitosan scaffold. This study suggested that chitosan-alginate scaffolds promote cell proliferation, enhance phenotype expression of HTB-94 chondrocytes, and may potentially serve as an improved alternative to chitosan scaffolds for cartilage tissue engineering.     

An aligned nanofibrous collagen scaffold by electrospinning and its effects on in vitro fibroblast culture

Fabrication of nanofibrous scaffolds with well-defined architecture mimicking native extracellular matrix analog has significant potentials for many specific tissue engineering and organs regeneration applications. The fabrication of aligned collagen nanofibrous scaffolds by electrospinning was described in this study. The structure and in vitro properties of these scaffolds were compared with a random collagen scaffold. All the collagen scaffolds were first crosslinked in glutaraldehyde vapor to enhance the biostability and keep the initial nano-scale dimension intact. From in vitro culture of rabbit conjunctiva fibroblast, the aligned scaffold exhibited lower cell adhesion but higher cell proliferation because of the aligned orientation of fibers when compared with the random scaffold. And the alignment of the fibers may control cell orientation and strengthen the interaction between the cell body and the fibers in the longitudinal direction of the fibers.     

Analysis of mesenchymal stem cells grown on a three-dimensional HYAFF 11-based prototype ligament scaffold

Ligaments are complex structures that maintain the mechanical stability of the joint. Healing of injured ligaments involves the interactions of different cell types, local cellular environment, and the use of devices. To gain new information on the complex interactions between mesenchymal stem cells (MSCs) and a specific hyaluronan-based prototype scaffold (HYAFF, useful for ligament tissue engineering, short time-course experiments were performed to analyze the proliferation, vitality, and phenotype of MSCs grown on the scaffold. MSC proliferation was analyzed using the MTT test, during the early time points (2, 4, 6, days). Viability was assessed using calcein/acetyloxymethylester immunofluorescence dye and confocal microscopy analysis. Hyaluronic acid receptor (CD44), typical matrix ligament proteins (collagen type I, type III, laminin, fibronectin, actin), and chondrogenic/osteogenic markers (collagen type II and bone sialoprotein) were evaluated by immunohistochemistry. Our data demonstrated that MSC growth and viability were cell density-dependent. MSCs completely wrapped the fibers of the scaffold, expressed CD44, collagen type I, type III, laminin, fibronectin, and actin, and were negative to collagen type II and bone sialoprotein. These data demonstrate that MSCs survive well in the hyaluronan-based prototype ligament scaffold, as assessed after 2 days from seeding, and express CD44, a receptor important for scaffold interaction, and proteins responsible for the functional characteristics of the ligaments.     

Developing an alginate/chitosan hybrid fiber scaffold for annulus fibrosus cells

A fibrous scaffold made of alginate or alginate/chitosan was fabricated for annulus fibrosus (AF) cell culture using a wet-spinning and lyophilization technique. The scaffolds were evaluated using several in vitro tests. Scanning electron microscopy showed the scaffold fibers generally aligned in one direction with individual fiber diameters varying between 40-100 microm. The alginate/chitosan hybrid scaffold exhibited a slower degradation rate, while both scaffold types did not display any cyto-toxicity to 3T3 fibroblasts and could maintain canine AF cell growth. The AF cells retained their spherical shape within the fibrous scaffold at the beginning of the culture period and formed into cell clusters at later times. Specific extracellular matrix molecules, including collagen I, collagen II, and aggrecan, could be detected in the AF cell clusters. These results demonstrate the feasibility of using this hybrid alginate/chitosan scaffold for AF cell culture, and the potential application for intervertebral disc tissue engineering.     

Electrospun bio-composite P(LLA-CL)/collagen I/collagen III scaffolds for nerve tissue engineering

One of the biggest challenges in peripheral nerve tissue engineering is to create an artificial nerve graft that could mimic the extracellular matrix (ECM) and assist in nerve regeneration. Bio-composite nanofibrous scaffolds made from synthetic and natural polymeric blends provide suitable substrate for tissue engineering and it can be used as nerve guides eliminating the need of autologous nerve grafts. Nanotopography or orientation of the fibers within the scaffolds greatly influences the nerve cell morphology and outgrowth, and the alignment of the fibers ensures better contact guidance of the cells. In this study, poly (L-lactic acid)-co-poly(ε-caprolactone) or P(LLA-CL), collagen I and collagen III are utilized for the fabrication of nanofibers of different compositions and orientations (random and aligned) by electrospinning. The morphology, mechanical, physical, and chemical properties of the electrospun scaffolds along with their biocompatibility using C17.2 nerve stem cells are studied to identify the suitable material compositions and topography of the electrospun scaffolds required for peripheral nerve regeneration. Aligned P(LLA-CL)/collagen I/collagen III nanofibrous scaffolds with average diameter of 253 ± 102 nm were fabricated and characterized with a tensile strength of 11.59 ± 1.68 MPa. Cell proliferation studies showed 22% increase in cell proliferation on aligned P(LLA-CL)/collagen I/collagen III scaffolds compared with aligned pure P(LLA-CL) scaffolds. Results of our in vitro cell proliferation, cell-scaffold interaction, and neurofilament protein expression studies demonstrated that the electrospun aligned P(LLA-CL)/collagen I/collagen III nanofibrous scaffolds mimic more closely towards the ECM of nerve and have great potential as a substrate for accelerated regeneration of the nerve.