Multicenter Evaluation of the Mycobacteria Growth Indicator Tube for Testing Susceptibility of Mycobacterium tuberculosis to First-Line Drugs

In a multicenter study involving three reference centers for mycobacteria, the reliability of the Mycobacteria Growth Indicator Tube (MGIT) for rapid antimicrobial susceptibility testing (AST) of Mycobacterium tuberculosis was evaluated and compared to the radiometric method (BACTEC 460TB). Test cultures for which the results of the MGIT and BACTEC 460TB tests were discordant were checked by the conventional proportion method on solid medium. Four hundred forty-one isolates have been tested for susceptibility to isoniazid (INH), rifampin (RMP), ethambutol (EMB), and streptomycin (SM). Discrepant results were obtained for three isolates (0.7%) with INH (susceptible by MGIT, resistant by BACTEC 460TB), for four isolates (0.9%) with RMP (susceptible by MGIT, resistant by BACTEC 460TB), for six isolates (1.9%) with EMB (four susceptible by MGIT, resistant by BACTEC 460TB; two resistant by MGIT, susceptible by BACTEC 460TB), and for four isolates (0.9%) with SM (two susceptible by MGIT, resistant by BACTEC 460TB; two resistant by MGIT, susceptible by BACTEC 460TB). When cultures with discordant results were tested by the conventional proportion method, about half of the cultures yielded results similar to the BACTEC 460TB results, while the other half yielded results similar to the MGIT results. Turnaround times were 3 to 14 days (median, 8.8 days) for MGIT and 3 to 15 days (median, 7.8 days) for BACTEC 460TB. There was no statistically significant difference between the susceptibility testing results of the two methods (P > 0.05). These data demonstrate that the MGIT system is an accurate, nonradiometric alternative to the BACTEC 460TB method for rapid susceptibility testing of M. tuberculosis.     

Evaluation of Two Line Probe Assays for Rapid Detection of Mycobacterium tuberculosis,Tuberculosis (TB) Drug Resistance,and Non-TB Mycobacteria in HIV-Infected Individuals with Suspected TB

Limited performance data from line probe assays (LPAs), nucleic acid tests used for the rapid diagnosis of tuberculosis (TB), nontuberculosis mycobacteria (NTM), and Mycobacterium tuberculosis drug resistance are available for HIV-infected individuals, in whom paucibacillary TB is common. In this study, the strategy of testing sputum with GenoType MTBDRplus (MTBDR-Plus) and GenoType Direct LPA (Direct LPA) was compared to a gold standard of one mycobacterial growth indicator tube (MGIT) liquid culture. HIV-positive (HIV⁺) individuals with suspected TB from southern Africa and South America with <7 days of TB treatment had 1 sputum specimen tested with Direct LPA, MTBDR-Plus LPA, smear microscopy, MGIT, biochemical identification of mycobacterial species, and culture-based drug-susceptibility testing (DST). Of 639 participants, 59.3% were MGIT M. tuberculosis culture positive, of which 276 (72.8%) were acid-fast bacillus (AFB) smear positive. MTBDR-Plus had a sensitivity of 81.0% and a specificity of 100%, with sensitivities of 44.1% in AFB smear-negative versus 94.6% in AFB smear-positive specimens. For specimens that were positive for M. tuberculosis by MTBDR-Plus, the sensitivity and specificity for rifampin resistance were 91.7% and 96.6%, respectively, and for isoniazid (INH) they were 70.6% and 99.1%. The Direct LPA had a sensitivity of 88.4% and a specificity of 94.6% for M. tuberculosis detection, with a sensitivity of 72.5% in smear-negative specimens. Ten of 639 MGIT cultures grew Mycobacterium avium complex or Mycobacterium kansasii, half of which were detected by Direct LPA. Both LPA assays performed well in specimens from HIV-infected individuals, including in AFB smear-negative specimens, with 72.5% sensitivity for M. tuberculosis identification with the Direct LPA and 44.1% sensitivity with MTBDR-Plus. LPAs have a continued role for use in settings where rapid identification of INH resistance and clinically relevant NTM are priorities.     

Rapid and accurate detection of rifampin and isoniazid-resistant Mycobacterium tuberculosis using an oligonucleotide array

To rapidly detect rifampin, isoniazid and multidrug resistance in Mycobacterium tuberculosis isolates, a new system (BluePoint MtbDR, Bio Concept Inc., Taichung, Taiwan) including an oligonucleotide array and an automatic reader was evaluated. The array simultaneously identifies M. tuberculosis and predominant mutations in the rpoB, katG and inhA upstream regulatory region (inhA-r) genes. The system was assessed with 324 clinical M. tuberculosis isolates, including 210 multidrug-resistant, 41 rifampin mono-resistant, 34 isoniazid mono-resistant and 39 fully susceptible isolates. The results were compared with those obtained using the GenoType MTBDRplus test, drug-resistant gene sequencing and conventional drug susceptibility testing. The detection limit of the array was 25 pg DNA. The array and the GenoType MTBDRplus test detected 179 (85.2%) and 182 (86.7%) multidrug-resistant M. tuberculosis strains, respectively. The sensitivities of the array for detecting rifampin and isoniazid resistance were 98.4% and 87.7%, respectively, whereas the sensitivities of the GenoType MTBDRplus test for detecting rifampin and isoniazid resistance were 98.8% and 88.9%, respectively. No significant difference was found between the tests with respect to their sensitivities to detect multidrug resistance (p 0.66), rifampin resistance (p 0.69) or isoniazid resistance (p 0.68). The discrepancies were mainly attributed to rare mutations in inhA-r, which were not included in the array. The array can directly reveal transmission-associated mutations, which are useful for epidemiological investigations. The turnaround time of the array test was 6–7 h. This study confirms the feasibility of using this system for rapid and accurate diagnosis of isoniazid and rifampin resistance in M. tuberculosis.     

Discordance across Several Methods for Drug Susceptibility Testing of Drug-Resistant Mycobacterium tuberculosis Isolates in a Single Laboratory

Given the increases in drug-resistant tuberculosis, laboratory capacities for drug susceptibility testing are being scaled up worldwide. A laboratory must decide among several endorsed methodologies. We evaluated 87 Mycobacterium tuberculosis isolates for concordance of susceptibility results across six methods: the L-J proportion method, MGIT 960 SIRE AST, Gene/Xpert MTB/RIF, GenoType MTBDRplus line probe assay, MycoTB MIC plate, and a laboratory-developed mycobacteriophage quantitative PCR (qPCR)-based method. Most (80%) isolates were multidrug resistant. Of the culture-based methods, the mycobacteriophage qPCR method was fastest, the L-J proportion method was the slowest, and the MGIT method required the most repeat testing (P < 0.05). For isoniazid (INH), 82% of isolates were susceptible by all methods or resistant by all methods, whereas for rifampin (RIF), ethambutol (EMB), and streptomycin (STR), such complete concordance was observed in 77%, 50%, and 51% of isolates, respectively (P < 0.05 for INH or RIF versus EMB or STR). The discrepancies of EMB and STR stemmed largely from diminished concordance of the MGIT EMB results (kappa coefficient range, 0.26 to 0.30) and the L-J STR result (kappa range, 0.35 to 0.45) versus other methods. Phage qPCR and the MycoTB MIC plate were the only methods that yielded second-line susceptibilities and revealed significant quantitative correlations for all drugs except cycloserine, as well as moderate to excellent kappa coefficients for all drugs except for para-aminosalicylic acid. In summary, the performance of M. tuberculosis susceptibility testing differs by platform and by drug. Laboratories should carefully consider these factors before choosing one methodology, particularly in settings where EMB and STR results are clinically important.     

Comparison of manual mycobacteria growth indicator tube and epsilometer test with agar proportion method for susceptibility testing of Mycobacterium tuberculosis

Background and Objectives: Antimycobacterial susceptibility tests take weeks, and delayed therapy can lead to spread of Mycobacterium tuberculosis. Therefore, rapid, accurate and cost-effective methods are required for proper therapy selection. In this study, the Mycobacteria growth indicator tube (MGIT) and epsilometer test (Etest) methods were compared to the agar proportion method for susceptibility testing of Mycobacterium tuberculosis. Materials and Methods: The susceptibility tests against isoniazid (INH), rifampin (RIF), streptomycin (STM) and ethambutol (ETM) of 51 M. tuberculosis complex isolates were analyzed by the MGIT, Etest and agar proportion methods. Results: The concordance between MGIT/Etest and agar proportion methods was 98% for INH and 100% for RIF, STM, ETM. There were not statistically significant differences in results of the susceptibility tests between MGIT/Etest and the reference agar proportion method. Conclusion: The results have shown that MGIT and Etest methods can be used instead of the agar proportion method, because these two methods are more rapid and easier than the agar proportion method.     

Flow Cytometric Testing of Susceptibilities of Mycobacterium tuberculosis Isolates to Ethambutol, Isoniazid, and Rifampin in 24 Hours

Susceptibility testing of Mycobacterium tuberculosis is seriously limited by the time required to obtain results. We show that susceptibility testing of clinical isolates of M. tuberculosis can be accomplished rapidly with acceptable accuracy by using flow cytometry. The susceptibilities of 35 clinical isolates of M. tuberculosis to various concentrations of isoniazid, rifampin, and ethambutol were tested by the agar proportion method and by flow cytometry. Agreement between the results from the two methods was 95, 92, and 83% for isoniazid, ethambutol, and rifampin, respectively. Only 11 discrepancies were detected among 155 total tests. The results of flow cytometric susceptibility tests were available within 24 h of inoculation of drug-containing medium, while the proportion method required 3 weeks to complete. The flow cytometric method is also simple to perform.     

Multicenter Evaluation of Anyplex Plus MTB/NTM MDR-TB Assay for Rapid Detection of Mycobacterium tuberculosis Complex and Multidrug-Resistant Isolates in Pulmonary and Extrapulmonary Specimens

The rapid diagnosis of tuberculosis (TB) and the detection of drug-resistant Mycobacterium tuberculosis strains are critical for successful public health interventions. Therefore, TB diagnosis requires the availability of diagnostic tools that allow the rapid detection of M. tuberculosis and drug resistance in clinical samples. Here, we performed a multicenter study to evaluate the performance of the Seegene Anyplex MTB/NTM MDR-TB assay, a new molecular method based on a multiplex real-time PCR system, for detection of Mycobacterium tuberculosis complex (MTBC), nontuberculous mycobacteria (NTM), and genetic determinants of drug resistance. In total, the results for 755 samples (534 pulmonary and 221 extrapulmonary samples) were compared with the results of smears and cultures. For pulmonary specimens, the sensitivities of the Anyplex assay and acid-fast bacillus smear testing were 86.4% and 75.0%, respectively, and the specificities were 99% and 99.4%. For extrapulmonary specimens, the sensitivities of the Anyplex assay and acid-fast bacillus smear testing were 83.3% and 50.0%, respectively, and the specificities of both were 100%. The negative and positive predictive values of the Anyplex assay for pulmonary specimens were 97% and 100%, respectively, and those for extrapulmonary specimens were 84.6% and 100%. The sensitivities of the Anyplex assay for detecting isoniazid resistance in MTBC strains from pulmonary and extrapulmonary specimens were 83.3% and 50%, respectively, while the specificities were 100% for both specimen types. These results demonstrate that the Anyplex MTB/NTM MDR-TB assay is an efficient and rapid method for the diagnosis of pulmonary and extrapulmonary TB and the detection of isoniazid resistance.     

Evaluation of the AID TB Resistance Line Probe Assay for Rapid Detection of Genetic Alterations Associated with Drug Resistance in Mycobacterium tuberculosis Strains

The rapid accurate detection of drug resistance mutations in Mycobacterium tuberculosis is essential for optimizing the treatment of tuberculosis and limiting the emergence and spread of drug-resistant strains. The TB Resistance line probe assay from Autoimmun Diagnostika GmbH (AID) (Strassburg, Germany) was designed to detect the most prevalent mutations that confer resistance to isoniazid, rifampin, streptomycin, amikacin, capreomycin, fluoroquinolones, and ethambutol. This assay detected resistance mutations in clinical M. tuberculosis isolates from areas with low and high levels of endemicity (Switzerland, n = 104; South Africa, n = 52) and in selected Mycobacterium bovis BCG 1721 mutant strains (n = 5) with 100% accuracy. Subsequently, the line probe assay was shown to be capable of rapid genetic assessment of drug resistance in MGIT broth cultures, the results of which were in 100% agreement with those of DNA sequencing and phenotypic drug susceptibility testing. Finally, the line probe assay was assessed for direct screening of smear-positive clinical specimens. Screening of 98 clinical specimens demonstrated that the test gave interpretable results for >95% of them. Antibiotic resistance mutations detected in the clinical samples were confirmed by DNA sequencing. We conclude that the AID TB Resistance line probe assay is an accurate tool for the rapid detection of resistance mutations in cultured isolates and in smear-positive clinical specimens.     

Detection of Mycobacterium tuberculosis resistance mutations to rifampin and isoniazid by real-time PCR

Objective: The objective of our study was to evaluate the use of a real-time polymerase chain reaction (PCR)-based technique for the prediction of phenotypic resistance of Mycobacterium tuberculosis. Materials and Methods: We tested 67 M tuberculosis strains (26 drug resistant and 41 drug susceptible) using a method recommended for the LightCycler platform. The susceptibility testing was performed by the absolute concentration method. For rifampin resistance, two regions of the rpoB gene were targeted, while for identification of isoniazid resistance, we searched for mutations in katG and inhA genes. Results: The sensitivity and specificity of this method for rapid detection of mutations for isoniazid resistance were 96% (95% CI: 88% to 100%) and 95% (95% CI: 89% to 100%), respectively. For detection of rifampin resistance, the sensitivity and specificity were 92% (95% CI: 81% to 100%) and 74% (95% CI: 61% to 87%), respectively. The main isoniazid resistance mechanism identified in our isolates is related to changes in the katG gene that encodes catalase. We found that for rifampin resistance the concordance between the predicted and observed phenotype was less than satisfactory. Conclusions: Using this method, the best accuracy for genotyping compared with phenotypic resistance testing was obtained for detecting isoniazid resistance mutations. Although real-time PCR assay may be a valuable diagnostic tool, it is not yet completely satisfactory for detection of drug resistance mutations in M tuberculosis.     

PCR detection of Mycobacteraemia in Tanzanian patients with extrapulmonary tuberculosis

In 191 Tanzanian patients admitted to hospital with suspected extrapulmonary tuberculosis (TB), TB was diagnosed in 158 patients; the remaining 33 patients had neither microbiological nor clinical evidence of TB.Mycobacterium tuberculosis was detected in the blood of 25 patients, in 92% by a polymerase chain reaction (PCR) technique and in 52% by culture of buffy coat cells. The presence of mycobacterial DNA orMycobacterium tuberculosis bacteria in peripheral blood (positive culture) was significantly associated with HIV infection; it was detected in 22 (21.4%) of 103 HIV-seropositive patients compared to only 3 (3.5%) of 55 HIV-seronegative patients (p<0.009). In two-thirds of the patients with mycobacteraemia, TB can be detected by simple smears from other organ sites. In patients with suspected extrapulmonary tuberculosis in whom smears from the infected site are negative or not available, PCR on blood will confirm the diagnosis within 24 hours in one third of the cases.     

Pyrosequencing for Rapid Detection of Mycobacterium tuberculosis Resistance to Rifampin,Isoniazid, and Fluoroquinolones

After isoniazid and rifampin (rifampicin), the next pivotal drug class in Mycobacterium tuberculosis treatment is the fluoroquinolone class. Mutations in resistance-determining regions (RDR) of the rpoB, katG, and gyrA genes occur with frequencies of 97%, 50%, and 85% among M. tuberculosis isolates resistant to rifampin, isoniazid, and fluoroquinolones, respectively. Sequences are highly conserved, and certain mutations correlate well with phenotypic resistance. We developed a pyrosequencing assay to determine M. tuberculosis genotypic resistance to rifampin, isoniazid, and fluoroquinolones. We characterized 102 M. tuberculosis clinical isolates from the Philippines for susceptibility to rifampin, isoniazid, and ofloxacin by using the conventional submerged-disk proportion method and validated our pyrosequencing assay using these isolates. DNA was extracted and amplified by using PCR primers directed toward the RDR of the rpoB, katG, and gyrA genes, and pyrosequencing was performed on the extracts. The M. tuberculosis H37Rv strain (ATCC 25618) was used as the reference strain. The sensitivities and specificities of pyrosequencing were 96.7% and 97.3%, 63.8% and 100%, and 70.0% and 100% for the detection of resistance to rifampin, isoniazid, and ofloxacin, respectively. Pyrosequencing is thus a rapid and accurate method for detecting M. tuberculosis resistance to these three drugs.Rifampin (rifampicin), isoniazid, and the fluoroquinolones are the most important initial drug markers for extensively drug-resistant Mycobacterium tuberculosis strains, defined as multidrug-resistant (MDR) isolates (resistant to both isoniazid and rifampin) with additional resistance to a fluoroquinolone and to one of the injectable drugs (2). The fluoroquinolones have become an essential part of treatment regimens for MDR tuberculosis (7, 25). Due to their potency and safety, the new-generation fluoroquinolones are now even being evaluated as first-line medications for tuberculosis (3, 13, 20). Wang et al. further suggested that routine fluoroquinolone resistance testing may have a clinical impact by showing a significant correlation between development of fluoroquinolone and first-line M. tuberculosis drug resistance in an area in which resistant strains are highly endemic (28).The spontaneous acquisition of DNA sequence mutations is the primary genetic basis for the development of M. tuberculosis drug resistance (14). Since sequences are highly conserved, certain mutations correlate well with phenotypic resistance, and a limited number of mutations account for the majority of phenotypic resistance to the important antituberculosis medications, various methods of genotypic testing have successfully been used for the rapid detection of M. tuberculosis resistance (16, 22). The sites that most frequently contain mutations associated with phenotypic resistance, called resistance-determining regions (RDR), differ depending on the drug tested. Among rifampin-resistant isolates worldwide, 95 to 97% harbor mutations in the rifampin RDR, an 81-bp target encompassing codons 507 to 533 of the 3,519-bp rpoB gene (17). Isoniazid resistance has a more complex mechanism, involving several gene targets, the most important of which is codon 315 of the 2,223-bp katG gene, in which mutations are found in up to 50% of resistant isolates (18). Likewise, M. tuberculosis has a quinolone RDR which spans codons 88 to 94 of the 2,517-bp gyrA gene. Mutations in this region, particularly in codon 88, 90, 91, or 94, correlate with high-level resistance and are seen in 42 to 85% of resistant clinical isolates (6).Pyrosequencing, a method of DNA sequencing by synthesis, has been applied to the rapid detection of M. tuberculosis resistance to rifampin, isoniazid, and ethambutol (9, 29). Its main advantage is a much shorter turnaround time than that of conventional drug susceptibility testing, the latter taking 2 to 4 weeks from the time an isolate is obtained in pure culture.After isoniazid and rifampin, the next pivotal drug class in M. tuberculosis treatment is the fluoroquinolone class, as previously discussed (3, 7, 13, 20, 25, 28). Given that most resistance to the latter is determined by mutations that are generally limited to the quinolone RDR of the gyrA gene, it should be feasible and clinically more relevant to develop an assay for rapid resistance testing which includes fluoroquinolone resistance in addition to rifampin and isoniazid resistance.We developed a pyrosequencing assay to determine M. tuberculosis genotypic resistance to rifampin, isoniazid, and fluoroquinolones, which we validated against the conventional submerged-disk proportion method. We also improved on the previously reported pyrosequencing assay by reducing the number of primers required to sequence for rifampin resistance (9).     

Characterization of rpoB Mutations in Rifampin-Resistant Clinical Mycobacterium tuberculosis Isolates from Greece

There is a geographic distribution of Mycobacterium tuberculosis strains with various rpoB gene mutations that account for rifampin resistance. We studied 17 rifampin-resistant clinical isolates from patients in Greece to identify rpoB mutations. The aim of our study was the evaluation of a commercially available line probe assay kit (INNO-LiPA Rif. TB) to detect rpoB mutations and rifampin resistance. The results obtained with the commercially available assay were compared to those obtained by automated DNA sequence analysis of amplified PCR products. Randomly amplified polymorphic DNA (RAPD) analyses of the isolates were also performed. The overall concordance of the line probe assay with phenotypic rifampin susceptibility test was 94%. Three distinct rpoB mutations in codons Ser₅₃₁, His₅₂₆, and Asp₅₁₆ were correctly identified with the kit, but mutations in external regions and insertions were detected only by automated DNA sequence analysis. The changes in codons Ser₅₃₁ and His₅₂₆ accounted for the majority of rifampin resistance, as previously described for isolates from other geographic areas. The results obtained by RAPD analyses of the isolates suggested that clonally related M. tuberculosis strains can have subclones bearing distinct mutant rpoB alleles. We conclude that this line probe assay kit, which is fast and with which tests are easy to perform, can be used for the rapid detection of rifampin resistance in M. tuberculosis before the availability of results by conventional methods and for epidemiological studies but that negative results obtained by this method do not rule out rifampin resistance.     

HSP65-PRA identification of non-tuberculosis mycobacteria from 4892 samples suspicious for mycobacterial infections

Various molecular methods have been used for the rapid identification of mycobacterial species. In this survey, evaluation of antibiotic resistance and PCR-restriction fragment length polymorphism analysis (PRA) of the hsp65 gene was carried out for identification of non-tuberculosis mycobacteria (NTM) isolates from different clinical specimens. Forty-eight different mycobacterial isolates were selected and followed by the conventional and PRA of hsp65 for species identification. The antibiotic susceptibility test was carried out according to standard methods. A 439 bp PCR product of hsp65 in all selected isolates was amplified and digested with the BstEII and HaeIII restriction enzymes. The restriction fragment length polymorphism (RFLP) patterns were analyzed for species identification. Using PRA for 48 mycobacterial selected isolates, including 15 M. tuberculosis, one M. bovis and all 32 isolates of NTM, revealed 11 different species among the NTM isolates. The most frequent NTM isolates were M. kansasii, M. gordonae III, M. marinum, M. chelonae, M. scrofluaceum and M. gastri. In most cases, the PRA results were perfectly in accordance with the classical biochemical method. Combination of resistance to rifampin and isoniazid was present among M. kansasi, M. gordoniae III, M. scrofluaceum, M. chelonae, M. marinum, M. gastri, M. gordoniae II and M. trivale isolates. A high incidence of co-resistance to six, five, four and three anti-TB drugs was observed in 18.5%, 9.1%, 6.6% and 11.7% of all NTM isolates, respectively. Our results showed that PRA, in comparison with classical methods, is rapid and accurate enough for the identification of mycobacterial species from LJ medium. Additionally, we found that in Iran we have a highly diverse population of NTM isolates among patients suspected of having TB.     

Genotypic characterization and historical perspective of Mycobacterium tuberculosis among older and younger Finns, 2008–2011

The Mycobacterium tuberculosis genotypes obtained from elderly Finns were assessed and compared with those obtained from younger Finns to comprehend the epidemiology of tuberculosis (TB) in Finland. From 2008 to 2011, a total of 1021 M. tuberculosis isolates were characterized by spoligotyping and 15-locus mycobacterial interspersed repetitive units–variable number tandem repeat typing. In total, 733 Finnish-born cases were included in the study, of which 466 (64%) were born before 1945 (older Finns). Of these, 63 (14%) shared an M. tuberculosis genotype with foreign-born or younger Finnish cases (born after 1945), and 59 (13%) shared a genotype with older Finnish cases. Eighty-five per cent had a unique genotypic profile while 70% belonged to T or Haarlem families, suggesting that ongoing transmission is infrequent among young and elderly Finns. Simultaneous reactivation of TB among older Finns was the most likely cause for clustering. As most isolates belonged to Haarlem or T, Finland was most likely affected by a similar TB epidemic at the beginning of the twentieth century as that seen in Sweden and Norway. Younger Finns were significantly more likely to be clustered (56% versus 27%, p <0.001), have pulmonary TB (87% versus 71%, p <0.001) and to be sputum smear positive (57% versus 48%, p <0.05) indicating that the risk of TB transmission from younger Finns is likely to be larger than from older Finns. The M. tuberculosis isolates from elderly Finns were associated with dominant lineages of the early twentieth century and differed from the heterogeneous lineages found among younger TB patients. Additionally, younger TB patients were more likely to transmit TB than elderly Finns.     

Evaluation of the BBL MGIT (Mycobacterial growth indicator tube) AST SIRE system for antimycobacterial susceptibility testing of Mycobacterium tuberculosis to 4 primary antituberculous drugs

OBJECTIVE: To evaluate the performance of the BBL MGIT (Mycobacterial Growth Indicator Tube) AST SIRE system for the antimycobacterial susceptibility testing of Mycobacterium tuberculosis to isoniazid (at a concentration equivalent to the lower concentration used for testing by the method of proportion), rifampin, ethambutol, and streptomycin. DESIGN: Thirty-one clinical isolates and 30 challenge strains provided by the Centers for Disease Control and Prevention (CDC) were tested by MGIT AST SIRE using 2 methods of inoculum preparation, and results were compared with those of the method of proportion, which was considered the reference method. Clinical isolates for which the results of the 2 methods were discordant also were tested at 2 reference laboratories. RESULTS: Based on data from our site and the reference laboratories, agreement rates between initial MGIT AST SIRE results and the method of proportion for the clinical isolates with the inoculum prepared from a McFarland equivalent and from a positive MGIT tube, respectively, were 100% and 96.8% for isoniazid, 100% and 100% for rifampin, 96.8% and 100% for ethambutol, and 100% and 100% for streptomycin, excluding the isolate for which the discordant streptomycin result could not be resolved. For the 30 challenge isolates, agreement rates between MGIT AST SIRE and expected results and between method of proportion and expected results, respectively, were 96.7% and 93.3% for isoniazid, 93.3% and 100% for rifampin, 83. 3% and 100% for ethambutol, and 93.3% and 100% for streptomycin. For the clinical isolates, the mean time to an MGIT AST SIRE result of susceptible was 6.15 +/- 0.13 days (range, 5-8 days). For a result of resistant, the mean time overall was 5.00 +/- 0.24 days (range, 3-8 days). CONCLUSION: These data suggest that the MGIT AST SIRE system, using either method of inoculum preparation, is an acceptable alternative to the BACTEC 460 TB method of susceptibility testing of clinical isolates of M tuberculosis to isoniazid, rifampin, ethambutol, and streptomycin. Reasons for the lower agreement with the CDC challenge isolates should be investigated. Further evaluation of the MGIT AST SIRE system using a concentration of isoniazid equivalent to the higher concentration tested by the method of proportion would be useful, because the decision concerning use of this agent generally is based on the susceptibility test result at the higher concentration.     

Discordance between Xpert MTB/RIF Assay and Bactec MGIT 960 Culture System for Detection of Rifampin-Resistant Mycobacterium tuberculosis Isolates in a Country with a Low Tuberculosis (TB) Incidence

Among 452 samples that were positive by the Xpert MTB/RIF (Xpert) assay and MGIT 960 system (MGIT), 440 and 10 Mycobacterium tuberculosis samples were detected as rifampin susceptible and rifampin resistant, respectively. Two isolates that were rifampin susceptible by the MGIT system were rifampin resistant by the Xpert assay. rpoB sequencing identified a silent (CTG521TTG) mutation in one isolate and a missense (GAC516TAC) mutation in another. The detection of rifampin resistance is imperfect with both the Xpert assay and MGIT system. Any discordant rifampin resistance results should be confirmed by sequencing of the rpoB gene.     

Predicting Extensively Drug-Resistant Mycobacterium tuberculosis Phenotypes with Genetic Mutations

Molecular diagnostic methods based on the detection of mutations conferring drug resistance are promising technologies for rapidly detecting multidrug-/extensively drug-resistant tuberculosis (M/XDR TB), but large studies of mutations as markers of resistance are rare. The Global Consortium for Drug-Resistant TB Diagnostics analyzed 417 Mycobacterium tuberculosis isolates from multinational sites with a high prevalence of drug resistance to determine the sensitivities and specificities of mutations associated with M/XDR TB to inform the development of rapid diagnostic methods. We collected M/XDR TB isolates from regions of high TB burden in India, Moldova, the Philippines, and South Africa. The isolates underwent standardized phenotypic drug susceptibility testing (DST) to isoniazid (INH), rifampin (RIF), moxifloxacin (MOX), ofloxacin (OFX), amikacin (AMK), kanamycin (KAN), and capreomycin (CAP) using MGIT 960 and WHO-recommended critical concentrations. Eight genes (katG, inhA, rpoB, gyrA, gyrB, rrs, eis, and tlyA) were sequenced using Sanger sequencing. Three hundred seventy isolates were INH^r, 356 were RIF^r, 292 were MOX^r/OFX^r, 230 were AMK^r, 219 were CAP^r, and 286 were KAN^r. Four single nucleotide polymorphisms (SNPs) in katG/inhA had a combined sensitivity of 96% and specificities of 97 to 100% for the detection of INH^r. Eleven SNPs in rpoB had a combined sensitivity of 98% for RIF^r. Eight SNPs in gyrA codons 88 to 94 had sensitivities of 90% for MOX^r/OFX^r. The rrs 1401/1484 SNPs had 89 to 90% sensitivity for detecting AMK^r/CAP^r but 71% sensitivity for KAN^r. Adding eis promoter SNPs increased the sensitivity to 93% for detecting AMK^r and to 91% for detecting KAN^r. Approximately 30 SNPs in six genes predicted clinically relevant XDR-TB phenotypes with 90 to 98% sensitivity and almost 100% specificity.     

Detection of rpoB,katG and inhA gene mutations in Mycobacterium tuberculosis clinical isolates from Chongqing as determined by microarray

The emergence of multidrug-resistance Mycobacterium tuberculosis is an increasing threat to tuberculosis control programmes. Susceptibility testing of Mycobacterium tuberculosis complex isolates by traditional methods requires a minimum of 14 days. This can be reduced significantly if molecular analysis is used. DNA sequencing is a good method for detecting mutation, but cannot be used routinely because of its relatively high cost. A sensitive and specific microarray has been designed to detect mutations in the rifampin resistance determining region of rpoB and loci in katG and inhA associated with isoniazid (INH) resistance. A panel of Mycobacterium tuberculosis isolates containing 13 different rpoB genotypes, two mutation genotypes within codon 315 of katG and one mutation genotypes at inhA was used to validate the microarray. The results obtained indicate that 100% of rifampicin-resistant M. tuberculosis strains isolated in Chongqing had rpoB mutations, with 531-Ser and 526-His being the most common positions substituted. Of the total 50 INH resistant isolates, 82% had a katG315 mutation and 18% had an inhA mutation. All the mutations detected by the microarray method were also confirmed by conventional DNA sequencing. It is demonstrated that the microarray is an efficient, specialized technique and can be used as a rapid method for detecting rifampin and isoniazid resistance.     

Genetic Diversity and Dynamic Distribution of Mycobacterium tuberculosis Isolates Causing Pulmonary and Extrapulmonary Tuberculosis in Thailand

This study examined the genetic diversity and dynamicity of circulating Mycobacterium tuberculosis strains in Thailand using nearly neutral molecular markers. The single nucleotide polymorphism (SNP)-based genotypes of 1,414 culture-positive M. tuberculosis isolates from 1,282 pulmonary tuberculosis (PTB) and 132 extrapulmonary TB (EPTB) patients collected from 1995 to 2011 were characterized. Among the eight SNP cluster groups (SCG), SCG2 (44.1%), which included the Beijing (BJ) genotype, and SCG1 (39.4%), an East African Indian genotype, were dominant. Comparisons between the genotypes of M. tuberculosis isolates causing PTB and EPTB in HIV-negative cases revealed similar prevalence trends although genetic diversity was higher in the PTB patients. The identification of 10 reported sequence types (STs) and three novel STs was hypothesized to indicate preferential expansion of the SCG2 genotype, especially the modern BJ ST10 (15.6%) and ancestral BJ ST19 (13.1%). An association between SCG2 and SCG1 genotypes and particular patient age groups implies the existence of different genetic advantages among the bacterial populations. The results revealed that increasing numbers of young patients were infected with M. tuberculosis SCGs 2 and 5, which contrasts with the reduction of the SCG1 genotype. Our results indicate the selection and dissemination of potent M. tuberculosis genotypes in this population. The determination of heterogeneity and dynamic population changes of circulating M. tuberculosis strains in countries using the Mycobacterium bovis BCG (bacillus Calmette-Guérin) vaccine are beneficial for vaccine development and control strategies.     

Performance of BACTEC 960 Mycobacteria Growth Indicator Tube in the Susceptibility Testing of Genetically Characterized<Emphasis Type="Italic"> Mycobacterium tuberculosis</Emphasis> Isolates

In this study, the 7H10 agar proportion method was compared with the BACTEC TB-460 and BACTEC MGIT 960 systems (BD Biosciences, USA) for the susceptibility testing of 22 genetically characterized Mycobacterium tuberculosis isolates for isoniazid, rifampin, streptomycin, and ethambutol. The 7H10 agar proportion method agreed with the resistant genotype in 87.3%, BACTEC TB-460 in 92.7%, and the MGIT in 96.4% of the cases, showing the high sensitivity of MGIT in the detection of resistant isolates.