A new series of two poly(carbazole)‐based copolymers (poly(9‐hexyl‐carbazole‐co‐9‐(6‐(3‐(4‐phenylquinolin‐2‐yl)carbazol‐9‐yl)hexyl)carbazole) (PCVz) and poly(9,9‐dioctylfluorene‐co‐9‐(6‐(3‐(4‐phenylquinolin‐2‐yl)carbazol‐9‐yl)hexyl)carbazole) (PFCVz)) containing carbazoylphenylquinoline pendant groups were synthesized via the Suzuki coupling reaction for polymer light‐emitting diode applications. The electro‐optical properties of ITO/PEDOT/Polymer/PBD/LiF/Al devices based on these copolymers were investigated using UV‐visible, photoluminescence, and electroluminescence spectroscopy. The turn‐on voltages of the copolymer devices were found to be 6.0–8.0 V. The maximum brightness and luminescence efficiency of the copolymers device were found to be 230 cd · m?2 and 0.28 cd · A?1 at 11 V, respectively.
Summary: Soluble conjugated random and alternating copolymers (PCz‐PSP) derived from N‐hexyl‐3,6‐carbazole (Cz) and 1,1‐dimethyl‐2,3,4,5‐tetraphenylsilole (PSP) were synthesized by palladium(0)‐catalyzed Suzuki coupling reactions. The feed ratios of Cz to PSP were 95:5, 90:10, 80:20, 70:30, and 50:50. Chemical structures and optoelectronic properties of the copolymers were characterized by 1H NMR, 13C NMR, UV absorption, cyclic voltammetry, photoluminescence, electroluminescence, and field effect transistor. HOMO levels of the copolymers are between −5.15 and −5.34 eV. Single‐layer devices with a configuration of ITO/copolymer/Ba/Al were fabricated and the copolymer with PSP content of 20% displayed the highest external quantum efficiency of 0.77%. Field effect transistors with tantalum pentoxide‐polyacrylonitrile double insulators demonstrated that hole mobilities of the copolymers decreased with their PSP contents, and the hole mobility up to 9.3 × 10−6 cm2 · (V · s)−1 could be achieved.
Synthesis of coplymers derived from 3,6‐carbazole and silole. 相似文献
Three phosphorescent dendrimers ( IrC1 , IrC3 , and IrF2 ) with an iridium complex core and oligocarbazole or oligofluorene substituted ligands were synthesized and characterized. The structures of the oligocarbazole were designed to maintain high triplet energy of the ligands so that phosphorescence quenching in the resulting dendrimers can be prevented, while the oligofluorene in IrF2 resulted in undesired phosphorescence quenching. Best performance was obtained from an IrC3 based electrophosphorescent light‐emitting device with a maximum luminance of 13 060 cd · m?2 at a driving voltage of 11.5 V and a peak current‐efficiency of 4.3 cd · A?1 at a luminance of 3 400 cd · m?2, owing to its high PL efficiency, and efficient energy transfer between the iridium complex core and the ligands.
A new series of disubstituted polyacetylene derivatives that contain multi‐fluorine atoms on the pendent phenyl ring have been synthesized and characterized. The results reveal a greater red‐shift in UV‐vis absorption and PL emission upon incorporating more fluorine atoms on the pendent phenyl ring. Among them, disubstituted polyacetylene with a difluorophenyl group ( PDPA‐2F ) showed the highest luminescent efficiency. The device performance can be promoted by blending a hole‐transporting material TM‐TPD into PDPA‐2F as the active layer or by using a light‐emitting copolymer in which PDPA‐2F was copolymerized with a carbazole group ( PDPA‐2Fcab ). A light‐emitting diode of ITO/PEDOT/ PDPA‐2Fcab /Ca/Al revealed a maximum luminescence of 4230 cd · m?2 at 14 V and a maximum current efficiency of 3.37 cd · A?1 at 7 V.
The synthesis, thermal and emission properties of an electrophosphorescent platinum(II) metallopolyyne polymer consisting of 9‐butylcarbazole‐2,7‐diyl spacer P1 are described. The optical and electronic properties of P1 are compared to their molecular diplatinum(II) and digold(I) model complexes. The photophysical properties of P1 are somehow analogous to its 2,7‐fluorene‐linked congener but differs significantly from that for the 3,6‐carbazole derivative. Its optical band gap is notably reduced as compared to that for the 3,6‐carbazole analog. Multi‐layer polymer light‐emitting diodes (PLEDs) were fabricated with P1 as the emitting layer which gave a strong green‐yellow electrophosphorescence. The best PLED can reach the maximum current efficiency of 4.7 cd · A−1 at 5 wt.‐% doping level, corresponding to an external quantum efficiency of 1.5%. This represents the first literature example of efficient PLEDs exhibiting pure triplet emission under electrical excitation for metallopolyynes without the concomitant singlet emission. For safety concern, this metallopolymer was also tested for possible cytotoxicity and it does not show significant cytotoxic activity on liver and breast derived human cells at reasonable doses, rendering this functional material safe to use in practical devices.
Fluorene‐based single‐chain copolymers with a white light emitter consisting of a blue and an orange chromophore have been synthesized and their photophysical and electroluminescent properties are investigated. The experimental results suggest that only a relatively small fraction of the orange‐emitting units incorporated into the fluorene is needed to achieve efficient white light emission by controlled incomplete energy transfer. A device from a copolymer with 0.02% DDQ content showed the highest external quantum efficiency of 2.64% with a luminance efficiency of 4.06 cd · A?1 with CIE coordinates (0.28, 0.24). The EL emissions are extremely stable over a wide range of current densities.
Segmented block copolymers were synthesized using monodisperse diaramide (TΦT) as hard segments and PTMO with a molecular weight of 2 900 g · mol?1 as soft segments. The aramide: PTMO segment ratio was increased from 1:1 to 2:1 thereby changing the structure from a high molecular weight multi‐block copolymer to a low molecular weight end‐block copolymer. The thermal and thermal‐mechanical properties were studied by DSC and DMA. Also studied were the tensile and the elastic properties as well as the melt rheological behavior as a function of frequency. The crystallinity of aramide in the end‐block copolymers was found to be higher than in the multi‐block copolymer.
Novel polymer cladding materials were synthesized and their potential for use in optical waveguide devices was investigated. 9‐[2‐(2,3,5,6‐Tetrafluoro‐4‐vinylphenoxy)ethyl]‐9H‐carbazole and 1‐pentafluorophenylpyrrole‐2,5‐dione were used as comonomers for preparing the acrylic cladding copolymers. These showed a low resistivity (≈2 × 1013 Ω · cm) at room temperature and a low optical loss (?0.6 dB · cm?1) at a wavelength of 1.55 µm. The refractive indexes and the glass transition temperatures of the polymer cladding materials can be controlled by the composition of the copolymers. The resulting polymers are good candidates for cladding materials for practical applications in devices.
A series of anthracene‐based conjugated copolymers containing 9,10‐bis(6‐bromonaphthalen‐2‐yl)‐2‐tert‐butylanthracene (BNA) and 2,7‐diphenyl substituted fluorene (DPPF) moieties are prepared via a palladium‐catalyzed Suzuki polymerization. All of the synthesized polymers emit blue light at around 450 nm and show good thermal and color stability. Their electroluminescence spectra remain unchanged at high driving voltage. The double‐layer polymer light‐emitting diode (PLED) fabricated with ITO/PEDOT:PSS/DPPFBNA3/CsF/Al, produces a maximum brightness of 1 650 cd · m?2 and has a luminance efficiency of 0.39 cd · A?1. The ITO/PEDOT:PSS/TFB/DPPFBNA3/CsF/Al multilayer PLED, incorporating a TFB layer to facilitate hole transportation, produces a maximum brightness of 5 371 cd · m?2 and a luminance efficiency of 1.18 cd · A?1.
Summary: Novel readily soluble random low‐band‐gap conjugated copolymers (PFO–DTTP, Eg ≈ 1.77–2.00 eV) derived from 9,9‐dioctylfluorene (DOF) and 2,3‐dimethyl‐5,7‐dithien‐2‐yl‐thieno[3,4‐b]pyrazine (DTTP) were prepared. The solutions and the solid thin films of the copolymers absorbed light from 300–690 nm. Prototype photovoltaic cells from solid state composite films with the copolymer PFO–DTTP30 and [6,6]‐phenyl C61 butyric acid methyl ester (PCBM) showed power conversion efficiencies up to 0.83% under an AM1.5 solar simulator (100 mW · cm−2). For electroluminescent devices, the emission peaks were around 734–780 nm. This indicates that the low band gap copolymers are promising materials for polymeric solar cells and deep red/near infrared light‐emitting diodes.
Synthesis of novel low‐band‐gap fluorene‐based copolymer. 相似文献
Summary: A well defined blue electroluminescent fluorene‐carbazol‐fluorene trimer 3,6‐bis‐(9,9‐dihexyl‐9H‐fluoren‐3‐yl)‐9‐alkyl‐9H‐carbazole was synthesized using a Suzuki type cross coupling reaction as the key step. A way to attach this chromophore to a norbornene was developed and the resulting electroactive monomer was polymerised using the “3rd generation Grubbs catalyst” (N,N‐bis(mesityl) 4,5‐dihydroimidazol‐2‐ylidene)(3‐bromo‐pyridine)2(Cl)2Ru?CHPh), yielding an amorphous polymer with a narrow molecular weight distribution, which was used to build a light‐emitting diode exhibiting electroluminescence peaking at 410 nm.
Incorporation of the fluorene‐carbazol‐fluorene trimer as the emissive layer in an ITO/PEDOT:PSS/emitter/Ca/Al light emitting device. 相似文献
Summary : New carbazole‐based ladder‐polymers have been prepared utilising a 3,6‐diacyl‐2,7‐dibromocarbazole building block 4 . Suzuki polycondensation of 4 with carbazole‐2,7‐diboronic acid followed by addition of methyl lithium and ring closure with boron trifluoride gave ladder‐polymers 9 with all methine bridges, analogous to ladder‐type poly(para‐phenylene). In very dilute solution, these polymers show blue‐green fluorescence similar to that from the corresponding LPPP. At higher concentrations, a broader red‐shifted emission is seen which suggests that the chains are aggregating in solution. Homopolymerisation of 4 followed by condensation of the carbonyls with boron sulfide produced a novel ladder‐type structure 13 with alternating five‐ and six‐membered rings. This ladder‐polymer displays bright yellow‐green fluorescence. Cyclic voltammetry indicated that these materials have HOMO energy levels comparable to the work function of ITO, making them good candidates for use as hole accepting emissive materials for LEDs.
Poly(3‐hexylthiophene)‐block‐poly(2‐ethyl‐2‐oxazoline) amphiphilic rod–coil diblock copolymers have been synthesized by a combination of Grignard metathesis (GRIM) and ring‐opening cationic polymerization. Diblock copolymers containing 5, 15, and 30 mol‐% poly(2‐ethyl‐2‐oxazoline) have been synthesized and characterized. The synthesized rod–coil block copolymers display nanofibrillar morphology where the density of the nanofibrills is dependent on the concentration of the poly(2‐ethyl‐2‐oxazoline) coil segment. The conductivity of the diblock copolymers was lowered from 200 to 35 S · cm?1 with an increase in the content of the insulating poly(2‐ethyl‐2‐oxazoline) block. By contrast, the field‐effect mobility decreased by 2–3 orders of magnitude upon the incorporation of the poly(2‐ethyl‐2‐oxazoline) insulating segment.
Summary: The synthesis of a series of rod‐coil diblock copolymers with flexible poly(ethylene oxide) chains ( = 5 000 g · mol−1) and rod blocks consisting of monodisperse oligo(p‐benzamide)s is described. The formation of defined supramolecular aggregates in solution as well as the solid state has been analyzed. The length of the oligo(p‐benzamide)s has been systematically varied from n = 1 to 7 units. The influence of n on aggregation in chloroform and aqueous solution was investigated by GPC as well as UV‐vis spectroscopy. A critical aggregation length was found for chloroform (n = 5) and water (n = 4), below which no aggregation is observed under otherwise identical experimental conditions. Aggregation of the polymers in chloroform solution can be chemically reversed by the addition of PCl5, resulting in conversion of the aromatic amides into imidoyl chlorides. Such amide‐protected block copolymers show no aggregation in NMR and GPC experiments. Imidoyl chloride formation was shown to be reversible, i.e., addition of water regenerated the oligo(p‐benzamide) blocks.
Conversion of aramide block copolymer into molecularly dissolved form using PCl5. 相似文献
The syntheses, properties, and optoelectronic device characteristics of four new 3,6‐carbazole‐based donor/acceptor conjugated copolymers are reported. Such copolymers are used to explore the effects of acceptor strength and backbone coplanarity on the electronic and optoelectronic properties. The optical bandgaps of the studied copolymers are PCzQ (2.29 eV) > PCzDTQ (1.91 eV) > PCzTP (1.75 eV) > PCzDTTP (1.49 eV), which are much smaller than the parent poly(3,6‐carbazole). The power conversion efficiency of the photovoltaic cells fabricated from blends of copolymer/PC61BM or PC71BM reached 1.01 and 1.73% by varying the film thickness or blend ratio. The experimental results suggest the potential application of 3,6‐carbazole acceptor conjugated copolymers in optoelectronic devices.
A series of polymerizations of 3,6‐dibromo‐9‐(2‐ethylhexyl)carbazole was carried out in different monomer concentrations using standard Yamamoto reaction conditions. It was found that the molecular weight of the resulting poly(N‐(2‐ethylhexyl)carbazol‐3,6‐diyl) strongly depends on the monomer concentration in the reaction mixture. Matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) measurements confirmed the formation of low‐molar‐mass cyclic oligomers of the 3,6‐disubstituted carbazole. In this paper we describe, for the first time, the formation of large amounts of a cyclic tetramer and of higher macrocycles in the synthesis of poly(N‐alkyl‐3,6‐carbazoles) by the Yamamoto method. This seems to be a limiting factor in the synthesis of high molecular weight poly(N‐alkyl‐3,6‐carbazole)s. The optical, thermal, and electrochemical properties of poly(N‐(2‐ethylhexyl)carbazol‐3,6‐diyl) have been investigated. Poly(N‐(2‐ethylhexyl)carbazol‐3,6‐diyl) is thermally stable, with 5% weight loss at 460 °C in nitrogen. The polymer exhibits a weak blue fluorescence with a maximum at 425 nm. Poly(N‐(2‐ethylhexyl)carbazol‐3,6‐diyl) is electrochemically stable, its highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels are ?5.0 and ?1.6 eV, respectively.
The product of spontaneous termination formed after addition of one or two t‐BuA units onto living PMMA chains in the MMA/t‐BuA block copolymerization was isolated and characterized by SEC, UV, FT‐IR, Raman and NMR spectroscopy. It appears as a low‐molecular‐weight peak in SEC eluograms of the copolymers, absorbing at 260 nm; its retention time corresponds to that of the PMMA block. In its FT‐IR and Raman spectra, new bands appeared corresponding to the C?C and C?O vibrations of a conjugated and H‐bonded ester group of the enol form of the cyclic oxoester composed of MMA and t‐BuA units. Experimental support of a back‐biting reaction at the link between PMMA and Pt‐BuA blocks is presented.
A copper‐catalyzed Ullmann C–N coupling reaction was used for the preparation of a new carbazole‐based HPU in good yield with a high molecular weight through a facile “AB2 + A2 + B2”‐type approach. The HPU exhibited good solubility, high thermal stability with a Tg of 196 °C, as well as a suitable HOMO level for good hole injection and transporting properties. A two‐layer OLED device, using HPU as hole‐transporting layer (HTL) and Alq3 as the light‐emitting layer, was fabricated to investigate the hole‐transporting properties of HPU. The luminance efficiency reached 1.14 cd · A?1 at the maximum current density of 1 240 mA · cm?2, while the maximum luminance efficiency was 1.65 cd · A?1, indicating the high morphological and thermal stability of HPU.
Zirconium pyrophosphate (ZPP)/poly(2,5‐benzimidazole) composites were prepared by polymerization of 3,4‐diaminobenzoic acid with zirconium hydrogen phosphate in polyphosphoric acid. The composite membranes for polymer electrolyte membranes were prepared by casting the polymerization solutions directly onto stainless steel plates. Membranes doped in 60 wt.‐% phosphoric acid solution had high proton conductivity values of more than 0.12 S · cm?1 (at 180 °C and 1% RH). Physical properties of the doped membranes, including the mechanical strength and dimensional stability, improved as ZPP content in the composites increased to 10–20 wt.‐%.
In order to study the energy‐transfer phenomenon in ruthenium‐coordinated polymers, novel block copolymers from carbazolylethyl methacrylate and 2‐vinylpyridine were prepared by living anionic polymerization; the copolymers possessed varying repeating units and had the desired molecular weight and a narrow‐molecular‐weight distribution. The ruthenium‐coordinated block copolymers were formed by reacting [RuII(tpy)(dmbpy)Cl] with the polymers, in which the pyridine units acted as ligands. Photoluminescence and optical absorption measurements of the coordinated block copolymers were carried out to observe the energy transfer in the complexes. The energy transfer from the carbazole blocks to the ruthenium‐coordinated blocks might take place either by an intra‐ and/or an intermolecular energy‐transfer mechanism. From the optical absorption, photoluminescence, and electroluminescence studies, it was observed that the ease of the energy transfer increased with an increasing number of metal‐complex units.
Normalized electroluminescence spectra of the device (ITO/PEDOT/RuIIL2bpolym/TAZ/Alq3/Ag). 相似文献
