TiO2 nanotubes as drug nanoreservoirs for the regulation of mobility and differentiation of mesenchymal stem cells

The extracellular microenvironment plays a key role in the regulation of cellular behavior. To mimic the natural extracellular microenvironment, TiO₂ nanotube (TNT) arrays as drug nanoreservoirs for loading of bone morphogenetic protein 2 (BMP2) were constructed on titanium substrates and then covered with multilayered coatings of gelatin/chitosan (Gel/Chi) for controlled drug release. The multilayered coatings were constructed via a spin-assisted layer-by-layer assembly technique. The successful fabrication of this system was monitored by field emission scanning electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy and contact angle measurements. Multilayered coating with Gel/Chi retained the drug bioactivity and release properties, which were revealed by superoxide dismutase activity measurement. In addition, cytoskeleton observation and wound healing assay confirmed that BMP2-loaded and multilayer-coated TNT arrays were able to stimulate motogenic responses of mesenchymal stem cells (MSCs). More importantly, the system demonstrated that it was capable of promoting the osteoblastic differentiation of MSCs. This study may have potential impact on the development of bone implants for enhanced bone osseointegration.     

The response of bone cells to titanium surfaces modified by simvastatin-loaded multilayered films

Abstract

The aim of this study was to enhance cytocompatibility of titanium substrates by loading a multilayer film of chitosan (Chi), gelatin (Gel) and simvastatin (SV). This was fabricated using a spin-assisted layer-by-layer (LBL) technique. The surface properties of the different substrates were characterized by field emission scanning electron microscopy (FE-SEM), atomic force microscope (AFM), X-ray photoelectron spectroscopy (XPS) and contact angle measurement, respectively. Simvastatin release in vitro was measured by ultraviolet-visible spectrophotometer. A well morphology with filopodia extensions was observed in mesenchymal stem cells (MSCs) grown on simvastatin loaded multilayered films-modified titanium substrates. After 7, 14 and 21 days of culture, the simvastatin loaded multilayered films increased cell proliferation, improved osteoblastic differentiation of alkaline phosphatase (ALP) and mineralization. Additionally, osteoclast diffentiation marker tartrate-resistant acid phosphatase (TRAP) was decreased in simvastatin loaded multilayered films. This study provides a new insight for the fabrication of titanium-based implants to enhance osseointegration especially for osteoporosis patients in orthopedic application.     

The effects of titania nanotubes with embedded silver oxide nanoparticles on bacteria and osteoblasts

A versatile strategy to endow biomaterials with long-term antibacterial ability without compromising the cytocompatibility is highly desirable to combat biomaterial related infection. TiO₂ nanotube (NT) arrays can significantly enhance the functions of many cell types including osteoblasts thus having promising applications in orthopedics, orthodontics, as well as other biomedical fields. In this study, TiO₂ NT arrays with Ag₂O nanoparticle embedded in the nanotube wall (NT-Ag₂O arrays) are prepared on titanium (Ti) by TiAg magnetron sputtering and anodization. Well-defined NT arrays containing Ag concentrations in a wide range from 0 to 15 at % are formed. Ag incorporation has little influence on the NT diameter, but significantly decreases the tube length. Crystallized Ag₂O nanoparticles with diameters ranging from 5 nm to 20 nm are embedded in the amorphous TiO₂ nanotube wall and this unique structure leads to controlled release of Ag⁺ that generates adequate antibacterial activity without showing cytotoxicity. The NT-Ag₂O arrays can effectively kill Escherichia coli and Staphylococcus aureus even after immersion for 28 days, demonstrating the long lasting antibacterial ability. Furthermore, the NT-Ag₂O arrays have no appreciable influence on the osteoblast viability, proliferation, and differentiation compared to the Ag free TiO₂ NT arrays. Ag incorporation even shows some favorable effects on promoting cell spreading. The technique reported here is a versatile approach to develop biomedical coatings with different functions.     

Preparation and in vitro evaluation of plasma-sprayed Mg2SiO4 coating on titanium alloy

In this paper, chemically synthesized Mg₂SiO₄ (MS) powder was plasma-sprayed onto a titanium alloy substrate to evaluate its application potentials in biomedicine. The phase composition and surface morphology of the MS coating were analyzed. Results showed that the MS coating was composed mainly of Mg₂SiO₄ phase, with a small amount of MgO and glass phases. Mechanical testing showed that the coating exhibited good adhesion strength to the substrate due to the close thermal expansion coefficient between the MS ceramic and the titanium alloy substrate. The measured bonding strength was as high as 41.5 ± 5.3 MPa, which is much higher than the traditional HA coating. In vitro cytocompatibility evaluation of the MS coating was performed using canine bone marrow stem cells (MSCs). The MSCs exhibited good adhesion, proliferation and differentiation behavior on the MS coating surface, which can be explained by the high protein adsorption capability of the MS coating, as well as the stimulatory effects of Mg and Si ions released from the coating. The proliferation rate of the MSCs on MS coating was very close to that on the hydroxylapatite (HA) coating. Alkaline phosphatase (ALP) activity analysis demonstrated that the ALP level of the MSCs on the MS coating remained high even after 21 days, implying that the surface characteristics of the coating are beneficial for the differentiation of MSCs. In summary, our results suggest that MS coating might be a new approach to prepare bone implants.     

Simultaneous electrospin–electrosprayed biocomposite nanofibrous scaffolds for bone tissue regeneration

Currently, the application of nanotechnology in bone tissue regeneration is a challenge for the fabrication of novel bioartificial bone grafts. These nanostructures are capable of mimicking natural extracellular matrix with effective mineralization for successful regeneration of damaged tissues. The simultaneous electrospraying of nanohydroxyapatite (HA) on electrospun polymeric nanofibrous scaffolds might be more promising for bone tissue regeneration. In the current study, nanofibrous scaffolds of gelatin (Gel), Gel/HA (4:1 blend), Gel/HA (2:1 blend) and Gel/HA (electrospin–electrospray) were fabricated for this purpose. The morphology, chemical and mechanical stability of nanofibres were evaluated by means of field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy and with a universal tensile machine, respectively. The in vitro biocompatibility of different nanofibrous scaffolds was determined by culturing human foetal osteoblasts and investigating the proliferation, alkaline phosphatase (ALP) activity and mineralization of cells. The results of cell proliferation, ALP activity and FESEM studies revealed that the combination of electrospinning of gelatin and electrospraying of HA yielded biocomposite nanofibrous scaffolds with enhanced performances in terms of better cell proliferation, increased ALP activity and enhanced mineralization, making them potential substrates for bone tissue regeneration.     

Development of gelatin-chitosan-hydroxyapatite based bioactive bone scaffold with controlled pore size and mechanical strength

Hydroxyapatite–chitosan/gelatin (HA:Chi:Gel) nanocomposite scaffold has potential to serve as a template matrix to regenerate extra cellular matrix of human bone. Scaffolds with varying composition of hydroxyapatite, chitosan, and gelatin were prepared using lyophilization technique where glutaraldehyde (GTA) acted as a cross-linking agent for biopolymers. First, phase pure hydroxyapatite–chitosan nanocrystals were in situ synthesized by coprecipitation method using a solution of 2% acetic acid dissolved chitosan and aqueous solution of calcium nitrate tetrahydrate [Ca(NO₃)₂,4H₂O] and diammonium hydrogen phosphate [(NH₄)₂H PO₄]. Keeping solid loading constant at 30 wt% and changing the composition of the original slurry of gelatin, HA–chitosan allowed control of the pore size, its distribution, and mechanical properties of the scaffolds. Microstructural investigation by scanning electron microscopy revealed the formation of a well interconnected porous scaffold with a pore size in the range of 35–150 μm. The HA granules were uniformly dispersed in the gelatin–chitosan network. An optimal composition in terms of pore size and mechanical properties was obtained from the scaffold with an HA:Chi:Gel ratio of 21:49:30. The composite scaffold having 70% porosity with pore size distribution of 35–150 μm exhibited a compressive strength of 3.3–3.5 MPa, which is within the range of that exhibited by cancellous bone. The bioactivity of the scaffold was evaluated after conducting mesenchymal stem cell (MSC) – materials interaction and MTT (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide) assay using MSCs. The scaffold found to be conducive to MSC’s adhesion as evident from lamellipodia, filopodia extensions from cell cytoskeleton, proliferation, and differentiation up to 14 days of cell culture.     

Electrosprayed Hydroxyapatite on Polymer Nanofibers to Differentiate Mesenchymal Stem Cells to Osteogenesis

Abstract

Electrospraying of hydroxyapatite (HA) nanoparticles onto the surface of polymer nanofibers provides a potentially novel substrate for the adhesion, proliferation and differentiation of mesenchymal stem cells (MSCs) into bone tissue regeneration. HA nanoparticles (4%) were electrosprayed on the surface of electrospun polycaprolactone (PCL) nanofibers (420 ± 15 nm) for bone tissue engineering. PCL/HA nanofibers were comparatively characterized with PCL/Collagen (275 ± 56 nm) nanofibers by FT-IR analysis to confirm the presence of HA. Fabricated PCL/HA and PCL/Collagen nanofibers and TCP (control) were used for the differentiation of equine MSC into osteogenic lineages in the presence of DMEM/F12 medium supplemented with β-glycerophosphate, ascorbic acid and dexamethasone. Cell proliferation and differentiation into an osteogenic lineage was evaluated by MTS assay, SEM observation, ALP activity, ARS staining, quantification of mineral deposition and expression of osteocalcin. Proliferation of MSCs increased significantly (P ? 0.05) up to 12% in PCL/Collagen (day 15) compared to PCL/HA nanofibrous substrate. ALP activity was increased 20% in PCL/HA by day 10 confirming the direction of osteogenic lineage from MSCs differentiation. PCL/HA stimulated an increased mineral secretion up to 26% by day 15 on ARS staining compared to PCL/Collagen nanofibers and showing cuboidal morphology by expressing osteocalcin. These results confirmed that the specifically fabricated PCL/HA composite nanofibrous substrate enhanced the differentiation of MSCs into osteogenesis.     

An increase in mouse tumor growth by an in vivo immunomodulating effect of titanium dioxide nanoparticles

Here, we investigated whether titanium dioxide (TiO₂) nanoparticles affect in vivo tumor growth through the modulation of mononuclear leukocytes. In vitro lymphocyte proliferation by lipopolysaccharide (LPS) or concanavalin A (ConA) was reduced by < 25?nm TiO₂ with a dose-dependent manner. Similarly, TiO₂ nanoparticles inhibited nitric oxide (NO) production from bone marrow-derived macrophages obtained from naïve mice. When mice were intraperitoneally (IP) injected with < 25 or < 100?nm TiO₂ once a day for 7 days, total cell number of splenocytes was reduced in the spleen of TiO₂ nanoparticle-exposed mice. Both CD4⁺ and CD8⁺ T-lymphocyte numbers were significantly decreased and B-lymphocyte development was retarded by host exposure to the TiO₂ nanoparticles. LPS-stimulated spleen cell proliferation was significantly reduced by host exposure to < 25 or < 100?nm TiO₂, but no changes were detected in ConA-stimulated spleen cell proliferation. Further, LPS-stimulated cytokine production by peritoneal macrophages and the percentage of NK1.1⁺ natural killer cells among splenocytes was reduced by the host exposures to the TiO₂ nanoparticles. When mice were IP injected with TiO₂ nanoparticles once a day for 28 days prior to the subcutaneous implantation of B16F10 melanoma cells, tumor growth was subsequently significantly increased. Collectively, these results show that TiO₂ nanoparticles may damage the development and proliferation of B- and T-lymphocytes, reduce the activity of macrophages, and decrease natural killer (NK) cell population levels, outcomes that appear to lead to an increase in tumor growth in situ. These studies allow us to suggest that TiO₂ nanoparticles might have the potential to enhance tumor growth through immunomodulation of B- and T-lymphocytes, macrophages, and NK cells.     

Effect of drug-loaded TiO<Subscript>2</Subscript> nanotube arrays on osseointegration in an orthodontic miniscrew: an <Emphasis Type="Italic">in-vivo</Emphasis> pilot study

Osseointegration was evaluated for the surface of miniscrews with TiO₂ nanotube arrays containing drugs in this in-vivo study. The diameter and length of the TiO₂ nanotube arrays were about 70 nm and 5 μm, respectively. Recombinant human bone morphogenetic protein-2 (rhBMP-2) or ibuprofen was loaded in the TiO₂ nanotube arrays with 12 miniscrews. The 12 drug-loaded miniscrews, 6 miniscrews with no drug-loaded TiO₂ nanotube arrays and 6 conventional miniscrews, were placed on the tibias of New Zealand white rabbits. Histological osseointegration was assessed 8 weeks after implantation by measuring the bone-to-implant contact (BIC) ratio. Ibuprofen-loaded miniscrews showed a significantly higher BIC of 71.6% over conventional miniscrews of 44.3% on average. The mean BIC ratios of rhBMP-2-loaded miniscrews and no drug-loaded miniscrews was 24.6% and 60.1%, respectively. Our results suggest that TiO₂ nanotube arrays on the surface of miniscrews could be used as carriers of drugs, and loading ibuprofen in TiO₂ nanotube arrays may improve osseointegration of miniscrews. However, the effect of rhBMP-2 loaded in TiO₂ nanotube arrays on osseointegration of miniscrews was questionable in this pilot study.     

Nanomechanics of biocompatible TiO2 nanotubes by Interfacial Force Microscopy (IFM)

Titanium dioxide (TiO₂) coatings exhibit desirable properties as biocompatible coatings. In this paper we report on mechanical properties and deformation behavior of (TiO₂) nanotubes grown on pure titanium substrates through anodic oxidation. Characterization of the as-processed coatings was conducted using scanning electron microscopy (SEM). Nanoindentation, using Interfacial Force Microscopy (IFM), was employed to probe the Young’s modulus of the nanotubes. Using the IFM technique, the modulus of the nanotube coating may be measured with minimal contribution from the underlying Ti substrate. The modulus of the (TiO₂) nanotube coating was estimated at 4–8 GPa. This technique was also used to study the inelastic deformation behavior of the nanotubes. (TiO₂) nanotubes were found to inelastically deform by “tube crushing” in the immediate vicinity of indenter tip, increasing the local density. This increase in local density caused an increase in the Young’s modulus from roughly 4 GPa to 30 GPa in the first 30 nm of indentation. Densification and the resulting increase in elastic modulus are related to the total work of inelastic deformation, irrespective of the loading history.     

Polysaccharide-protein surface modification of titanium via a layer-by-layer technique: characterization and cell behaviour aspects

To improve the surface biocompatibility of titanium films, a layer-by-layer (LBL) self-assembly technique, based on the polyelectrolyte-mediated electrostatic adsorption of chitosan (Chi) and gelatin (Gel), was used leading to the formation of multilayers on the titanium thin film surfaces. The film growth was initialized by deposition of one layer of positively charged poly(ethylene imine) (PEI). Then the thin film was formed by the alternate deposition of negatively charged Gel and positively charged Chi utilizing electrostatic interactions. The LBL film growth was monitored by several techniques. The chemical composition, surface topography as well as wettability were investigated by using X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), confocal laser scanning microscopy (CLSM) and water contact angle measurement, respectively. Quantitative XPS analysis showed the alternative change of C/N ratio after four sequential cycles coating of Ti/PEI/Gel/Chi/Gel, which indicated the discrete layer structure of coatings. Uncoated titanium (control sample) displayed a smooth surface morphology (root mean square (RMS) roughness was around 2.5 nm). A full coverage of coating with Gel/Chi layers was achieved on the titanium surface only after the deposition layers of PEI/(Gel/Chi)2. The PEI/Gel/(Chi/Gel)3 layer displayed a rough surface morphology with a tree-like structure (RMS roughness is around 82 nm). These results showed that titanium films could be modified with Chi/Gel which may affect the biocompatibility of the modified titanium films. To confirm this hypothesis, cell proliferation and cell viability of osteoblasts on LBL-modified titanium films as well as control samples were investigated in vitro. The proliferation of osteoblasts on modified titanium films was found to be greater than that on control (p<0.05) after 1 and 7 days culture, respectively. Cell viability measurement showed that the Chi/Gel-modified films have higher cell viability (p<0.05) than the control. These data suggest that Chi/Gel were successfully employed to surface engineer titanium via LBL technique, and enhanced its cell biocompatibility. The approach presented here may be exploited for fabrication of titanium-based implant surfaces.     

Age-related BMAL1 change affects mouse bone marrow stromal cell proliferation and osteo-differentiation potential

Introduction

Aging people''s bone regeneration potential is always impaired. Bone marrow stromal cells (MSCs) contain progenitors of osteoblasts. Donor age may affect MSCs’ proliferation and differentiation potential, but the genomic base is still unknown. Due to recent research''s indication that a core circadian component, brain and muscle ARNT-like 1 protein (BMAL1), has a role in premature aging, we investigated the normal aging mechanism in mice with their MSCs and Bmal1 gene/protein level.

Material and methods

1, 6 and 16 month old C57BL/6 mice were used and the bone marrow stromal cells were gained and cultured at early passage. Bmal1 gene and protein level were detected in these cells. Marrow stromal cells were also induced to differentiate to osteoblasts or adipocytes. Three groups of mice MSCs were compared on proliferation by flow cytometry, on cell senescence by SA-β-gal expression and after osteo-induction on osteogenic potential by the expression of osterix (Osx), alkaline phosphatase (ALP) and osteocalcin (OCN).

Results

Bmal1 gene and protein level as well as S-phase fraction of the cell cycle decreased in MSCs along with the aging process. At the same time, SA-β-gal+ levels increased, especially in the aged mice MSCs. When induced to be osteogenic, Osx gene expression and ALP activity declined in the mid-age and aged mice MSCs, while OCN protein secretion deteriorated in the aged mice MSCs.

Conclusions

These findings demonstrate that mouse MSCs changed with their proliferation and osteo-differentiation abilities at different aging stages, and that Bmal1 is related to the normal aging process in MSCs.     

Distinct Effects of RGD-glycoproteins on Integrin-Mediated Adhesion and Osteogenic Differentiation of Human Mesenchymal Stem Cells

The detailed interactions of mesenchymal stem cells (MSCs) with their extracellular matrix (ECM) and the resulting effects on MSC differentiation are still largely unknown. Integrins are the main mediators of cell-ECM interaction. In this study, we investigated the adhesion of human MSCs to fibronectin, vitronectin and osteopontin, three ECM glycoproteins which contain an integrin-binding sequence, the RGD motif. We then assayed MSCs for their osteogenic commitment in the presence of the different ECM proteins.As early as 2 hours after seeding, human MSCs displayed increased adhesion when plated on fibronectin, whereas no significant difference was observed when adhering either to vitronectin or osteopontin. Over a 10-day observation period, cell proliferation was increased when cells were cultured on fibronectin and osteopontin, albeit after 5 days in culture. The adhesive role of fibronectin was further confirmed by measurements of cell area, which was significantly increased on this type of substrate. However, integrin-mediated clusters, namely focal adhesions, were larger and more mature in MSCs adhering to vitronectin and osteopontin. Adhesion to fibronectin induced elevated expression of α₅-integrin, which was further upregulated under osteogenic conditions also for vitronectin and osteopontin. In contrast, during osteogenic differentiation the expression level of β₃-integrin was decreased in MSCs adhering to the different ECM proteins. When MSCs were cultured under osteogenic conditions, their commitment to the osteoblast lineage and their ability to form a mineralized matrix in vitro was increased in presence of fibronectin and osteopontin.Taken together these results indicate a distinct role of ECM proteins in regulating cell adhesion, lineage commitment and phenotype of MSCs, which is due to the modulation of the expression of specific integrin subunits during growth or osteogenic differentiation.     

The nanoscale geometry of TiO2 nanotubes influences the osteogenic differentiation of human adipose-derived stem cells by modulating H3K4 trimethylation

Nanostructured materials can direct stem cell lineage commitment solely by their various, but controllable, geometric cues, which would be very important for their future application in bone tissue engineering and bone regeneration. However, the mechanisms by which nano-geometric cues dictate the osteogenic differentiation of stem cells remain unclear. Epigenetics is central to cellular differentiation, a process that regulates heritable and long-lasting alterations in gene expression without changing the DNA sequence. Here, we explored the varied osteogenic behaviors of human adipose-derived stem cells (hASCs) on titanium dioxide (TiO₂) nanotube arrays of different diameters. Both in vitro and in vivo studies demonstrated that the nanoscale geometry influenced cellular differentiation and TiO₂ nanotubes with a diameter of 70 nm was the optimal dimension for the osteogenic differentiation of hASCs. Moreover, we observed that TiO₂ nanotubes promoted the osteogenic differentiation of hASCs by upregulating methylation level of histone H3 at lysine 4 (H3K4) in the promoter regions of osteogenic genes Runx2 and osteocalcin, by inhibiting demethylase retinoblastoma binding protein 2 (RBP2). These results revealed, for the first time, the epigenetic mechanism by which nanotopography directs stem cell fate.     

力学应变对大鼠骨髓间充质干细胞增殖和成骨分化能力的影响

探讨周期性双轴力学应变对大鼠骨髓间充质干细胞(M esenchym a l stem ce lls,M SC s)增殖和成骨分化能力的影响。选用9月龄健康SD雌性大鼠,分离股骨、胫骨提取骨髓,采用密度梯度离心法分离M SC s。体外培养M SC s传至第3代,以1×105细胞浓度接种于双轴力学应变系统,选取4 000μstra in,频率为1hz的力学应变对M SC s加载。每天加载3次,每次2 h,间隔2 h。观察力学应变作用后1 d、3 d,M SC s增殖和成骨分化能力的变化,并与相应未加力学应变对照组比较。结果表明:(1)力学应变可增高M SC s的碱性磷酸酶(ALP)和骨桥蛋白(OPN)表达量;力学应变作用3 d后M SC s的ALP和OPN表达量明显高于力学应变作用1 d。I型胶原(COL I)仅在力学应变作用3 d增高;骨钙素(OCN)在各组无明显变化。(2)力学应变可促进M SC s增殖,但力学应变作用1 d和3 d对M SC s增殖的作用无明显差异。上述结果提示:力学应变可以促进M SC s的增殖和成骨分化能力。     

The effect of polyelectrolyte multilayer coated titanium alloy surfaces on implant anchorage in rats

Advances have been achieved in the design and biomechanical performance of orthopedic implants in the last decades. These include anatomically shaped and angle-stable implants for fracture fixation or improved biomaterials (e.g. ultra-high-molecular-weight polyethylene) in total joint arthroplasty. Future modifications need to address the biological function of implant surfaces. Functionalized surfaces can promote or reduce osseointegration, avoid implant-related infections or reduce osteoporotic bone loss. To this end, polyelectrolyte multilayer structures have been developed as functional coatings and intensively tested in vitro previously. Nevertheless, only a few studies address the effect of polyelectrolyte multilayer coatings of biomaterials in vivo. The aim of the present work is to evaluate the effect of polyelectrolyte coatings of titanium alloy implants on implant anchorage in an animal model. We test the hypotheses that (1) polyelectrolyte multilayers have an effect on osseointegration in vivo; (2) multilayers of chitosan/hyaluronic acid decrease osteoblast proliferation compared to native titanium alloy, and hence reduce osseointegration; (3) multilayers of chitosan/gelatine increase osteoblast proliferation compared to native titanium alloy, hence enhance osseointegration. Polyelectrolyte multilayers on titanium alloy implants were fabricated by a layer-by-layer self-assembly process. Titanium alloy (Ti) implants were alternately dipped into gelatine (Gel), hyaluronic acid (HA) and chitosan (Chi) solutions, thus assembling a Chi/Gel and a Chi/HA coating with a terminating layer of Gel or HA, respectively. A rat tibial model with bilateral placement of titanium alloy implants was employed to analyze the bones’ response to polyelectrolyte surfaces in vivo. 48 rats were randomly assigned to three groups of implants: (1) native titanium alloy (control), (2) Chi/Gel and (3) Chi/HA coating. Mechanical fixation, peri-implant bone area and bone contact were evaluated by pull-out tests and histology at 3 and 8 weeks. Shear strength at 8 weeks was statistically significantly increased (p < 0.05) in both Chi/Gel and Chi/HA groups compared to the titanium alloy control. No statistically significant difference (p > 0.05) in bone contact or bone area was found between all groups. No decrease of osseointegration of Chi/HA-coated implants compared to non-coated implants was found. The results of polyelectrolyte coatings in a rat model showed that the Chi/Gel and Chi/HA coatings have a positive effect on mechanical implant anchorage in normal bone.