首页 | 官方网站   微博 | 高级检索  
     

电镜成像方式对数字散斑相关方法结果的影响
引用本文:阮乐乐,王卫泽,陈雨帆,轩福贞.电镜成像方式对数字散斑相关方法结果的影响[J].医学教育探索,2015(3):412-416.
作者姓名:阮乐乐  王卫泽  陈雨帆  轩福贞
作者单位:华东理工大学承压系统与安全教育部重点实验室,上海 200237,华东理工大学承压系统与安全教育部重点实验室,上海 200237,华东理工大学承压系统与安全教育部重点实验室,上海 200237,华东理工大学承压系统与安全教育部重点实验室,上海 200237
基金项目:国家自然科学基金资助项目(51275172);“973”资助项目(2012CB625104)
摘    要:研究了扫描电镜成像方式对数字散斑相关方法计算结果的影响,在此基础上对等离子喷涂铜涂层的变形场进行分析。结果表明二次电子成像和背散射电子成像的机理不同,应用时需要以相关系数及其标准差为标准,选取更为合适的成像方式。通过数字散斑相关方法显化了等离子喷涂铜涂层在加载过程中的应变场,结果表明随加载力增加,裂纹尖端应变场逐渐由蝴蝶状区域转为圆形钝化区。

关 键 词:数字散斑    扫描电镜    等离子喷涂    涂层
收稿时间:2014/10/10 0:00:00

Effect of Imaging Mode of Scanning Electron Microscope on the Results of Digital Speckle Correlation Method
RUAN Le-le,WANG Wei-ze,CHEN Yu-fan and XUAN Fu-zhen.Effect of Imaging Mode of Scanning Electron Microscope on the Results of Digital Speckle Correlation Method[J].Researches in Medical Education,2015(3):412-416.
Authors:RUAN Le-le  WANG Wei-ze  CHEN Yu-fan and XUAN Fu-zhen
Affiliation:Key Laboratory of Pressurized System and Safety of Ministry of Education, East China University of Science and Technology, Shanghai 200237, China,Key Laboratory of Pressurized System and Safety of Ministry of Education, East China University of Science and Technology, Shanghai 200237, China,Key Laboratory of Pressurized System and Safety of Ministry of Education, East China University of Science and Technology, Shanghai 200237, China and Key Laboratory of Pressurized System and Safety of Ministry of Education, East China University of Science and Technology, Shanghai 200237, China
Abstract:Abstract: Effect of imaging mode of scanning electron microscope (SEM) is investigated on the computation results of digital speckle correlation (DSC) method. The strain distribution on plasma sprayed copper coatings is analyzed based on the results. It shows that the imaging mechanisms are different for the secondary electron imaging mode and backscattered electron imaging mode. Correspondingly, the data of correlation coefficient and its standard deviation, obtained from the computation using DSC method, should be used as the criterion for selecting the proper imaging mode of SEM. The strain distribution of plasma sprayed coatings is characterized using the DSC method. The shape of the strain concentration zone at the cracking tip changes from butterfly like to circle like.
Keywords:digital speckle  scanning electron microscope  plasma spraying  coating
点击此处可从《医学教育探索》浏览原始摘要信息
点击此处可从《医学教育探索》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号